Waterpik WP-120 User manual

This device is only compatible with voltages of 100-240VAC, 50/60Hz ©2019 Water Pik, Inc.
First Use
1
WP-120 Series
QUICK START GUIDE
Fill reservoir with
warm water and
replace it firmly
on the base.
Turn pressure to high, point tip
into sink, turn power switch ON
until water flows. Turn OFF.
Insert tip firmly
until it clicks
into place.
High
Power
ON

TO AVOID MESS: KEEP TIP IN MOUTH WHILE UNIT IS ON.
FN 20026630-F AA
Water Floss
2
WP-120 Series
QUICK START GUIDE
Close lips enough to prevent
splashing while still allowing
water to flow from mouth
into sink. Increase pressure
to your liking.
Aim water at the gumline at a 90
degree angle. Follow the gumline
and pause briefly between teeth.
Turn power ON. Start on
low pressure. Place tip in
mouth. Lean over sink.
Power
ON