SRScales Barilift Scale 1000 User manual

861 Taylor Rd., Suite “I”
Columbus, Ohio 43230
www.ame-medical.com
Phone: [phone]
Fax: [phone]
[email protected]
e Barilift 1000 Scale adds new life and function to
your existing patient lifter. Simply attach between your
boom arm and hanger bar and you have just turned
your patient lifter* into a precision scale system.
is workhorse is built to last with the quality and
reliability you’ve come to expect from SR®Scales.
e Bari 1000 Weight Module is a compact precision
scale system designed for use with approved* lifter
designs employing compatible boom and hanger
congurations.
Completely self-contained, the Bari 1000 Weight
Module combines the latest microprocessor and load
cell technology to provide accurate and repeatable
weight data with a calibrated accuracy of 0.1%.
One button Auto-Zero Electronics makes patient
weighing quick and easy. e Bari 1000 Weight
Module derives its power from a single 9-volt battery
which will provide up to 3000 readings.
PAGE 1
Barilift 1000 Scale
KEY PRODUCT FEATURES
• Light Weight - Weighs just over 1 pound. Bring it with you when you need it.
• Built to Last - Load cell is machined from a single block of steel to maximum strength and performance.
• Accurate - Display patient weight data with 0.1% accuracy
• Battery Operated - 1 common 9v alkaline battery providing approximately 3,000 weigh cycles
• Programmable Auto Power Down (APD) to conserve power.
• Time Saver - Combine tasks to limit patient handling
• One Button Auto-Zero - Tare your seat sling to zero and you’re ready to weigh
• *e model shown ts the Hoyer® type patient lifter. Other congurations are available. Please call for a conguration
that is compatible with your specic patient lifter - see product brochure for details

861 Taylor Rd., Suite “I”
Columbus, Ohio 43230
www.ame-medical.com
Phone: [phone]
Fax: [phone]
[email protected]
PAGE 2
iNStallatiON
STEP 1: Attach the top hook of the SR801 Weight Module to the loop of the lifter boom, making sure that the hook is
fully engaged. Important: Tighten retainer screw until fully engaged.
STEP 2: Attach the swivel bar to the bottom of the scale system. Refer to lifter manual’s instructions.
STEP 3: Attach the sling/stretcher securely.
STEP 1: Attach the scale system as described
in the lifter manual’s instructions.
STEP 2: Attach the empty sling/stretcher to
the swivel bar securely.
STEP 3: Ensure the scale is hanging vertically
and is to free to pivot at both the
top and bottom connection points.
Ensure the scale system is free and
clear of any obstructions and press
the “ZERO” button to set the
system to zero. “0” will pan across
the screen for a couple seconds.
Display will then read “0.0”.
STEP 4: Press Kg/Lb button to choose
displaymodes.
STEP 5: Remove the sling/stretcher and
position patient. Reattach the sling
to the scale system ensuring the scale
is hanging vertically and is free to
pivot.
STEP 6: Carefully lift the patient and when
the motion has stabilized, press
the “WEIGH” button to display
the weight data. Do not touch the
patient or sling/stretcher during this
step.
STEP 7: Carefully lower patient when
weighing process is complete.
STEP 8: Re-Zero the scale system before each
weighing.
OPERATING INSTRUCTIONS