Shinko Denshi LF124R User manual

380002M51
S e m i - m i c r o a n d A n a l y t i c a l B a l a n c e
ＬＦ Series
Operation Manual
SHINKO DENSHI CO., LTD.
IMPORTANT
To ensure safe and proper use of the balance, please read this
manual carefully.
After reading this manual, store it in a safe place near the balance, so
you can review it as needed.

- i -
Preface
Thank you very much for choosing the LF series balance.
This balance has an automatic calibration (span adjustment) function, which can be easily
used at any time at the press of a button. The balance also has a function that alerts the user
of when it is time to calibrate the balance depending on the surrounding environment. This
enables you to calibrate the balance at the right time depending on your usage.
In addition, the balance comes standard with ISO/GLP/GMP compliant output functions, a
calendar and clock function, and various application measurement functions, such as the
counting mode, percentage weighing mode and addition mode.
The balance is easy to use, with a windshield that can be opened from the opposite side (the
right door with the left knob and vice versa) and a weighing chamber that can be easily
removed along with the windshield doors and the bottom plate for easy cleaning.

- ii -
●This manual is copyrighted by SHINKO DENSHI CO., LTD. and may not be reproduced
in part or in whole without permission.
●Please understand that part of this manual may not agree with the product due to
modifications or other such changes to it.
●Descriptions in this manual are subject to change without notice.
●This manual is created with all possible care. However, in the unlikely event of an
incorrect description or any other errors, please tell us.
●If any pages are bound in incorrect order or are missing, we will replace the manual.
Please contact the retailer from whom the balance was purchased.
●Trouble with the equipment and the system’s main unit will be serviced in accordance
with their maintenance contracts. However, please be aware that we will not be held
responsible for any indirectly related trouble that may occur such as operations being
stopped due to the trouble of the main unit.
●is the registered trademark of SHINKO DENSHI CO., LTD. The company
names and product names described in this manual are either their trademarks or
registered trademarks.
Instructions

- iii -
Important Notice
• You must be aware that the balance can potentially be dangerous.
Be sure to follow this manual when you install and operate the
balance, and perform maintenance and inspection.
• SHINKO DENSHI CO., LTD. takes no responsibility for any injury or
damage caused because you did not follow this manual or the
balance was incorrectly used or modified without permission.
 In today’s industrial equipment industry, potential risks are increasing due to new
materials, process methods, and faster machines. It is impossible to predict all situations
that pose such threats. In addition, there are too many “do’s” and “do not’s,” to be able to
cover them all in this manual. If the operation manual does not explicitly say that
something is OK to do, please interpret it as a “do not.” When installing or operating the
balance, or performing maintenance or inspections on it, give due consideration to safety
measures in addition to the instructions written in this manual and those written on the
balance’s main unit.
 This manual is copyrighted by SHINKO DENSHI CO., LTD. All rights reserved. Do not
reproduce or disclose drawings and technical documents without prior written consent
from SHINKO DENSHI CO., LTD.
 If you have any questions about this manual or you need more detailed information,
please have the model name (type) and the manufacture number ready and contact the
retailer from whom the balance was purchased.

- iv -
How to Use This Manual
Symbols in this manual
Understand the meanings of the following symbols to follow the instructions in this manual:
Symbol Meaning
This symbol indicates a dangerous situation that may cause death or
serious injury if not avoided.
This symbol indicates a situation that may cause damage to the system
or equipment, or data corruption, deletion, or overwriting if not avoided.
This symbol is used for information to which particular attention is
required, or to highlight information.
This symbol is used for information such as operational tips.
This symbol indicates a prohibited action that must not be done.
This symbol indicates a mandatory action that must be executed without
fail.