Stage right FR-36 User manual

PRODUCT INFORMATION PACKET
PRODUCT NAME: FR-36 Fold & Roll Riser

1
Table of Contents
Introduction…………………………………………………………………………………………………………………
General Safety Rules…………………………………………..…………………………………………………………
Symbols………………………………………………………………………………………………………………………
Technical Specifications………………………………….………………………………………………………………
Instructions…………………………………………………………………………………………………………………
Maintenance…………………………………………………………………………………………………………………
Customer Service Information…………………………………………………………………………………………
1
2
3
4
7
13
14

2
Introduction
The StageRight FR-36 Fold & Roll Riser has been designed and manufactured with safety, performance and
dependability as top priorities, making it easy to operate and maintain.
The care you give your FR-36 Fold & Roll Riser will greatly determine your satisfaction with its performance and
service life. Careful study of this manual is encouraged to obtain a thorough understanding of your new FR-36
Fold & Roll Riser and its functions and maintenance.
If your manual becomes lost or destroyed, StageRight will gladly provide you with a new copy. Should you
require additional information or assistance, please feel free to contact us at 1-800-438-4499.
BECAUSE STAGERIGHT CORPORATION MAINTAINS AN ONGOING
PROGRAM OF PRODUCT DEVELOPMENT AND IMPROVEMENT, WE
RESERVE THE RIGHT TO MAKE IMPROVEMENTS IN DESIGN OR CHANGES
IN SPECIFICATIONS WITHOUT INCURRING ANY OBLIGATIONS TO INSTALL
THEM ON UNITS PREVIOUSLY SOLD.

3
General Safety Rules
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below may result in serious
personal injury.
SAVE THESE INSTRUCTIONS
Stay clear of all pinc points.
Make sure t at all fasteners are properly engaged before use.
Make sure t at all decks are positioned properly onto t e support system.
Load treads evenly. Placing people only on t e top tread may cause tipping.
Do not use wit out railing. Railing must be used at all times for safety.
Save t ese instructions. Refer to them frequently and use them to instruct others who may use
the FR-36 Fold & Roll Riser .
Read t e Product Information Packet. Failure to read the information packet is considered a
misuse of this equipment.
Become familiar wit all caution and warning decals affixed to t e support system before
use.
Never cover or deface caution/warning labels.

4
Symbols
Safety Alert
: Precautions that involve your safety
Pinc Point Warning Label: Failure to keep hands away from
pinch points will result in personal injury
Read T e Operator’s Manual: To reduce risk of injury, user
must read and understand operator’s manual before using this
product
4
t
Level Warning Label: Be sure 4
th
level legs are engaged
when 4
th
level is in use to prevent injury, and stowed before
transport to protect floor surfaces.

5
StageRight Corporation Technical Specifications
FR-36 Fold & Roll Riser
Part # Description Weight (lbs) Shipping Dim.
307003 FR-36 Choral Riser 238 72”x36”x96”
307004 4
th
Level Add-On (FR-36) 60 76”x21”x ”
Construction, Finis , and Hardware
- Constructed of ASTM specified steel
- Baked-on powder coat finish.
- Zinc-plated hardware
- Heavy Duty casters

6
StageRight Corporation Technical Specifications
Part # Description Weight (lbs) Shipping Dim.
108349 FR-36 Side Rail Kit 67 69”x17”x38”
10768 Mounting Bracket 10 ”x ”x3”
Side Rail
Mounting
Bracket
Shown with Optional
Side Rail Kit 108349
Side Rail, (2) Required
Mounting Bracket,
(2) Required

7
Instructions
1
2
To fold up the FR-36, lock the wheels, and lift from the bottom tread. The tread assembly will rotate up
and into the folded position. To unfold the assembly, lock the wheels, and pull on the bottom tread, the
tread assembly will rotate down and into the unfolded position.
Note: 2 people necessary for t is step! To add the fourth level, depress the spring locks, and evenly
lift back rail up and out.

8
3
Lower the fourth level addition onto the lower levels. Insert fas-pins through hole as shown. Insert back
rail into addition, making sure spring locks are snapped into place.
4
To keep the riser from tipping after the 4
th
level addition has been installed, pull the fas-pin out of the
outer leg and lower the inner leg as shown. Line up the holes and replace the fas-pin. Note: inner legs
must be stowed prior to transport!

9
5
If multiple risers are being used, a straight or round shape can be made. Each level can be removed by
unbolting the four bolts that hold on each tread.
6
Note: Load treads evenly. Do not place people on t e top tread alone, as tipping may occur.
For a slightly curved shape, place the shortest tread on the bottom, with the shortest side facing forward.
Use connecting brackets on middle tread to connect multiple risers together.
Unbolt
LIFT

10
8
For improved performance, add Velcro straps to back of t e riser. Adding Velcro straps to
back of the riser will increase stability.
7
For a straight shape, alternate riser orientation. The first orientation is as shown above, the second is
with the longest tread on the bottom, with the longer side facing forward. Use connecting brackets on
middle tread to connect multiple risers together.
Velcro Straps

11
Instructions: Side Rail Kit
1
Position the Mounting Bracket on the stringer tubes as shown. Use a 3/8”-16 hex
head bolt, a 3/8” washer and the 3/8”-16 square nut (the square nut is welded to the
bracket) to secure the mounting bracket as shown. Tig ten bolts, do not over
tig ten as it will cause t e bracket to bend!
(Risers not shown for
clarity.)
Mounting
Brackets
Stringer Tube
Bolt & Washer
The mounting bracket
will rest against the
riser tube when
installed
.

12
2
B) Alternately you can attach the bent rail tubes into the bracket tubes
first and then two people can place the side rail into the bent tubes
from the top. Again be sure to insert the rail tubes evenly to avoid
binding. Secure all tubes in place using t e provided fas-pin!
A
B
A) Using two people attach the Side Rails to the brackets by
sliding the rail tubes into the bracket tubes. Be sure to
insert the rail tubes evenly to avoid binding. Secure all
tubes in place using t e provided fas-pin!

13
Maintenance
WARNING!
Read and Understand All Maintenance Procedures
Failure to follow all procedures listed below may cause serious injury
and a decrease in the equipments functional existence.
Frequently c eck to see t at all fasteners are properly engaged.
Touc up paint can be used to cover any scratc es or blemis es sustained t roug use.
Replace any damaged equipment wit genuine StageRig t parts. Failure to do so may result
in unsafe equipment and/or personal injury.

14
Customer Service
For parts or service contact StageRight Corporation. When ordering parts be sure to provide all relevant
information available including the name and part number of the equipment purchased. This information is
located on the technical specification page of this product information package. Customer Service hours are
Monday thru Friday from 8:00 a.m. to :00 p.m. Eastern Standard Time. Customers can phone toll-free at
[phone] or mail:
StageRight Corporation
49 Pioneer Parkway
Clare, Michigan 48617
www.stageright.com
StageRight Corporation
4 5 Pioneer Parkway
Clare, MI 48617
Toll-free: 800-438-44
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.stageright.com