Stahl KBDi-USB-TB50 series User manual

Operating instructions
KBDi-USB-* keyboards
KBDi-USB-TB50-*
KBDi-USB-M-*
KBDi-USB-P-*
KBDi-USB-J-*
R. STAHL HMI Systems GmbH
Adolf-Grimme-Allee 8
D 50829 Köln
Operating Instructions Version: 01.00.03
Issue date: 13.06.2017

Operating Instructions KBDi Keyboards Publisher
Page 2 of 24 R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017
Publisher
Publisher and copyright holder:
R. STAHL HMI Systems GmbH
Adolf-Grimme-Allee 8
D 50829 Köln
Registered place of business: Cologne
Court of registration: District court Cologne, HRB 30512
VAT number: DE 812 454 820
Phone: (switchboard) [phone] - 1000
(hotline) - 5000
Fax: - 4100
E-mail: (switchboard) [email protected]
(hotline) [e-mail]
All rights reserved.
This document may not be reproduced in whole or in part except with the written
consent of the publisher.
Subject to alterations.
Any warranty claims are limited to the right to demand amendments. Liability for any damage
that might result from the contents of these instructions or all other documentation is limited to
clear cases of premeditation.
We reserve the right to change our products and their specifications at any time, provided it is in
the interest of technical progress. The information in the current manual (online or on CD / DVD
/ USB stick) or in the operating instructions included in the delivery applies.
Trademarks
The terms and names used in this document are registered trademarks and / or products of the
companies in question.
Copyright © 2017 by R. STAHL HMI Systems GmbH. Subject to alterations

Operating Instructions KBDi Keyboards Specific markings
R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017 Page 3 of 24
Specific markings
The markings in these operating instructions refer to specific features that must be noted.
In detail, these are:
This sign alerts users to hazards that will result in death or serious
injury if ignored !
This sign alerts users to hazards that may result in death or serious
injury if ignored !
This sign alerts users to hazards that may damage machinery or
equipment or result in injury if ignored !
Information highlighted by this symbol indicates measures for the
prevention of damage to machinery or equipment !
Information highlighted by this symbol indicates important
information of which particular note should be taken !
Information highlighted by this symbol refers to a different
chapter or section in this manual or other documentation
or a web-page !
Warnings
Caution !
The device surface may heat up at ambient temperatures higher than 45 °C !
Caution at contact !
DANGER
WARNING
CAUTION
DOCUMENTATION
NOTICE
ATTENTION

Operating Instructions KBDi Keyboards Table of contents
Page 4 of 24 R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017
Table of contents
Description Page
Publisher 2
Specific markings 3
Warnings 3
Table of contents 4
1Preface 5
2Keyboard function 5
3Type allocation 6
3.1 Type marking 6
4Technical Data 6
5Conformity to standards 7
5.1 CEC / NEC / CSA 8
6Certificates 8
6.1 ATEX 9
6.2 IECEx 9
6.6 KGS 10
7Marking 10
8Permitted maximum values 10
9Type code 11
10 Safety information 12
10.1 General Safety Information 12
10.2 Cautionary note 12
10.3 Installation safety information 12
10.4 Safety information for operation 13
10.5 Special conditions 13
11 Mechanical dimensions 13
11.1 Cut-out 14
12 Connections 14
13 Maintenance 15
14 Troubleshooting 15
14.1 Repairs / hazardous substances 15
15 Disposal 15
15.1 RoHS directive 2011/65/EC 15
16 Front panel resistance 16
16.1 Materials 16
16.2 Material properties 16
16.2.1 Keyboard foil (Polyester) 16
17 Declaration of EC conformity 18
18 Release Notes 20

Operating Instructions KBDi Keyboards Preface
R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017 Page 5 of 24
1 Preface
These Operating Instructions contain all aspects relevant to explosion protection for the
KBDi-USB-* keyboards devices. They also contain information on the connection and
installation (etc.) of these devices.
All data relevant to explosion protection from the EC-type
examination certificate were copied into these operating instructions.
For the correct operation of all associated components please note,
in addition to these operating instructions, all other operating
instructions enclosed in this delivery as well as the operating
instructions of the additional equipment to be connected !
Please note that all certificates of the KBDi-USB-*
keyboards can be found in a separate document (CE_ET-
xx7).
You can find this document in the internet at
www.stahl-hmi.de or request it from R. STAHL HMI
Systems GmbH.
For more information on the HMIs please also refer to the
Manual (available as online manual on www.stahl-hmi.de).
2 Keyboard function
The type KBDi-USB-* keyboards are used to enter data, commands etc. on PCs and similar
devices in hazardous areas. In particular, they were designed for connection to HMI devices of
the device platform MANTA ET-/MT-xx7.
The type KBDi-USB-* keyboards are explosion-protected equipment for installation in
hazardous areas of zones 0 and 20. The devices may be connected to intrinsically safe USB
interfaces. Power supply and data communication takes place via the USB interface. The
keyboards are connected with a fixed cable.
Various keyboard versions are available that differ in their layout (German, US English, French,
etc.) and in their design (PC keyboard with mouse, trackball, touchpad or with joystick).
The touchpad uses resistive technology and can therefore be operated with a touch pen or with
gloved fingers.
The keyboards can be mounted inside a front panel or a desktop enclosure.
NOTICE
DOCUMENTATION

Operating Instructions KBDi Keyboards Type allocation
Page 6 of 24 R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017
3 Type allocation
Since the beginning of 2013, the T-series devices have been allocated new type names
according to the following pattern:
To avoid having to re-write certifications, the names in the certificates remain the same, but the
devices receive new names.
In the interest of a clear link between device type and certificate, both device names are listed
on the type plate from 01.04.2013 onwards.
3.1 Type marking
Old (certificate)
New
T-Ex*-KB-TB*
KBDi-USB-TB50*
T-Ex*-KB-M*
KBDi-USB-M*
T-Ex*-KB-P*
KBDi-USB-P*
T-Ex*-KB-J*
KBDi-USB-J*
* = alphanumeric or symbolic characters without relevance to explosion protection.
For the exact new device name and model please refer to the type
code.
4 Technical Data
Function / Equipment
KBDi-USB-*
Power supply
via USB interface
MTBF
typically 50,000 h at 20°C
Interfaces
1x USB for keyboard (Ex ia)
1x USB for mouse, touch pad, trackball, joystick (Ex ia)
Cable type
standard USB, open cable end
Cable lengths
usually 1.8 m
Enclosure
Steel / aluminium, installation enclosure
Enclosure protection type
Front
IP66 according to DIN EN 60529
Front with trackball module
statically IP66, dynamically IP54
Back
IP20 according to EN / IEC 60079-0
Keyboard foil
Polyester
Operating temperature range
Operation
-30°C … +60°C
Storage temperature range
-30°C … +70°C
Relative humidity
10 to 90% at +40°C, non-condensing
Dimensions [mm] (W x H x D)
581 x 186 x 50
Weight [kg]
3.0
NOTICE

Operating Instructions KBDi Keyboards Conformity to standards
R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017 Page 7 of 24
5 Conformity to standards
The KBDi-USB-* keyboards comply with the following standards and directives:
Standard
Classification
2. Supplement
ATEX directive
until 19.04.2016
from 20.04.2016
94/9/EG
2014/34/EU
EN 60079-0 : 2009
General requirements
EN 60079-5 : 2007
Powder filling "q"
EN 60079-7 : 2007
Increased safety "e"
EN 60079-11 : 2007
Intrinsic safety "i"
EN 60079-26 : 2007
Device protection (EPL) "Ga"
EN 60079-28 : 2004
Optical radiation
EN 60079-31 : 2009
Protected by enclosures "tD" (dust)
EN 61241-11 : 2006
Intrinsic safety "iD" (dust)
The product corresponds to requirements from:
EN 60079-0 : 2012
General requirements
EN 60079-11 : 2012
Intrinsic safety "i"
EN 60079-31 : 2014
Protected by enclosures "tD" (dust)
Electromagnetic compatibility
EMV directive
until 19.04.2016
from 20.04.2016
Classification
94/9/EG
2014/34/EU
EN 61000-6-2 : 2006
Interference resistance
EN 61000-6-4 : 2007
Interference emission
Low voltage directive
Directive 2006/95/EC
EN 50178 : 1997
Fitting power plants with electronic equipment
EN 61010-1 : 2001+
General requirements
RoHS directive
2011/65/EU
Classification
EN 50581 : 2012
Technical documentation for the assessment
of electrical and electronic products with
respect to the restriction of hazardous
substances

Operating Instructions KBDi Keyboards Certificates
Page 8 of 24 R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017
5.1 CEC / NEC / CSA
Standard
Classification
CAN/CSA-C22.2 No. 0-10
August 2011
General requirements
Canadian Electrical Code, Part II
CAN/CSA-C22.2 No. 61010-1-12
Safety Requirements for Electrical Equipment
for Measurement, Control, and Laboratory
Use - Part 1: General Requirements
(Third Edition)
CAN/CSA-C22.2 No. 60079-0 : 11
(December 2011)
Explosive atmospheres –Part 0: Equipment
General requirements
CAN/CSA-C22.2 No. 60079-5 : 11
(December 2011)
Explosive atmospheres –Part 5: Equipment
protection by powder filling “q”
CAN/CSA-C22.2 No. 60079-7 : 12
(February 2012)
Explosive atmospheres –Part 7: Equipment
protection by increased safety “e”
CAN/CSA-C22.2 No. 60079-11 : 11
(December 2011)
Explosive atmospheres –Part 11: Equipment
protection by intrinsic safety “i”
CAN/CSA-C22.2 No. 60529:05
(Reaffirmed 2010)
Degrees of protection provided by enclosures
(IP Code)
ANSI/UL 61010-1
(2012)
Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 1: General
Requirements (Third Edition)
ANSI/UL 60079-0
(sixth edition July 2013)
Explosive atmospheres –
Part 0: Equipment –General requirements
ANSI/UL 60079-5
(third edition November 2013)
Explosive atmospheres –
Part 5: Equipment protection by
powder filling “q”
ANSI/UL 60079-7
(fourth edition May 2013)
Explosive atmospheres –
Part 7: Equipment protection by
increased safety “e”
ANSI/UL 60079-11
(sixth edition March 2014)
Explosive atmospheres –
Part 11: Equipment protection by
intrinsic safety “i”
ANSI/IEC 60529-2004
Degrees of protection provided by enclosures
(IP code)
6 Certificates
The KBDi-USB-* keyboards are certified for installation in the following areas:
Europe:
according to ATEX Directive
International / Australia:
IECEx (International Electrotechnical Commision System for Certification to
Standards for Electrical Equipment for Explosive Atmospheres)
USA:
according to NEC
for installation in
Class I, Zone 1
carried out by:
CSA (Canadian Standard Association)

Operating Instructions KBDi Keyboards Certificates
R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017 Page 9 of 24
Canada:
according to CEC
for installation in
Class I, Division 2
carried out by:
CSA (Canadian Standard Association)
Russia / Kazakhstan / Belarus:
TR (Technical Regulation of the Eurasian Customs Union (EAC))
Korea
KGS (Korea Gas Safety Corporation)
6.1 ATEX
The ATEX certification is listed under the following certificate number:
Certificate number: BVS 11 ATEX E 102 X
6.2 IECEx
The IECEx certification is listed under the following certificate number:
Certificate number: IECEx TUR 11.0075X
You can access all IECEx certificates on the official
website of the IEC under their certificate number.
http://iecex.iec.ch/iecex/iecexweb.nsf/welcome?openform.
6.3 NEC / CSA
The NEC / CSA certification is listed under the following certificate number:
Certificate number: 70011698
6.4 CEC / CSA
The CEC / CSA certification is listed under the following certificate number:
Certificate number: 70011698
Note:
The HMIs are certified according to Ex e q [ia] IIC T4 Gb.
According to the CEC Part 1 each device with these protection types
may be operated in Class I, Division 2 areas.
For more details on this, please refer to the CEC.
6.5 TR
The TR certificate is listed under the following certificate number:
Certificate number: TC RU C-DE.ГБ04.B00478
DOCUMENTATION
NOTICE

Operating Instructions KBDi Keyboards Marking
Page 10 of 24 R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017
6.6 KGS
The KGS certification of the KBDi-USB-* keyboards ist included in the KGS certificate of the
ET-xx7 HMI devices.
The KGS certificate of the ET-xx7 HMI devices is listed under the following certification number:
Certificate number: 12-GA4BO-0617X
In order to be able to operate these HMI devices in Korea, each
device type additionally requires a KCC certificate.
Actually the following devices has such a certificate:
T-Ex-22 (ET-x67), T-Ex-22-DVI3 (ET-667-DVI3), T-Ex-24T (ET-x77
with touch screen (membrane))
7 Marking
Manufacturer
R. STAHL HMI Systems GmbH
Type code
KBDi-USB-TB50* / KBDi-USB-M* / KBDi-USB-P* /
KBDi-USB-J*
CE classification:
c0158
Testing authority and certificate
number:
BVS 11 ATEX E 102 X
Ex classification:
ATEX guideline 94/9/EC
e
II 1 G Ex ia IIC T4 Ga
II 1 D Ex ia IIIB T110°C Da
IECEx
Ex ia IIC T4 Ga
Ex ia IIIB T110°C Da
NEC / CEC
Ex ia IIC T4 Ga
Ex ia IIIB T110°C Da
Class I, Zone 0 AEx ia IIC T4 Ga
Zone 20 AEx ia IIIB T110°C Da
TR
0Ex ia IIC T4 Ga X
Ex ia IIIB T110°C Da
8 Permitted maximum values
Ui
=
5.5
VDC
Uo
=
5.5
VDC
Ii
=
1
A
Io
=
Ii
Pi
=
650
mW
Po
=
Pi
Ci
=
20
µF
Co
=
30
µF
Li
=
negligible
Lo
=
5
µH
For the joystick module, the following values apply:
Ci
=
40
µF
Co
=
10
µF
NOTICE

Operating Instructions KBDi Keyboards Type code
R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017 Page 11 of 24
9 Type code
KBDi-USB-aa-bb
Language layout
Pointer device
Interface
Product type:
Product key structure
Description
Version
KBDi-USB-TB50-bb
Keyboard with integrated trackball
KBDi-USB-TB50-VA-bb
Keyboard with integrated stainless steel trackball
KBDi-USB-M-bb
Keyboard with integrated mouse
KBDi-USB-P-bb
Keyboard with integrated touch pad
KBDi-USB-J-bb
Keyboard with integrated joystick
KBDi-USB-aa-DE
Lanugage: German (QWERTZ)
KBDi-USB-aa-US
Language: American (QWERTY)
KBDi-USB-aa-FR
Language: French (AZERTY)
KBDi-USB-aa-FR-BE
Language: French, Belgian version (AZERTY)
KBDi-USB-aa-CH
Language: German, Swiss layout
KBDi-USB-aa-ES
Language: Spanish

Operating Instructions KBDi Keyboards Safety information
Page 12 of 24 R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017
10 Safety information
This chapter is a summary of the key safety measures. The
summary is supplementary to existing rules which staff also have to
study.
The safety of persons and equipment in hazardous areas depends
on compliance with all relevant safety regulations. Thus, the
installation and maintenance staff carry a particular responsibility,
requiring precise knowledge of the applicable regulations and
conditions.
The notes listed below in section 10 must be heeded to avoid injury
and damage to equipment !
10.1 General Safety Information
All relevant accident prevention regulations and the rules for electric installations have
to be observed during installation, maintenace and operations. All persons involved in
installation, commission, maintenance and repairs of this device and its accessories must
be qualified accordingly and must have familiarised themselves with this manual and any
associated documentation.
In case of non-compliance or contravention of the above explosion-protection is no
longer guaranteed and all warranty claims shall be null and void.
National safety and accident prevention rules apply.
Use the device for its intended purpose only.
No changes to the device are permitted. The enclosure may only be opened by R.
STAHL HMI Systems GmbH.
The first four digits of the serial number on the type plate stand for the year of
manufacture.
10.2 Cautionary note
This is an EN 55022 Class A product.
In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
10.3 Installation safety information
The national assembly and installation rules and the generally accepted technical rules
must be observed. The device and its accessories must be connected and operated
according to applicable standards, directives and installation guidelines. Only qualified
personnel or personnel that has been instructed accordingly are allowed to install the
device.
Only appropriate tools must be used for the installation.
The keyboards must be earthed via the bolt at the back of the device.
We recommend you use screened cables with the keyboards. Routing of the cable may
reduce performance.
Before operating the keyboard you must ensure that it has been installed according to
regulations and that its cables are undamaged.
NOTICE
CAUTION
ATTENTION

Operating Instructions KBDi Keyboards Mechanical dimensions
R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017 Page 13 of 24
10.4 Safety information for operation
Operate the keyboard only if it is clean and undamaged. If the keyboard is in any way
damaged, do not touch it to avoid injury. In the case of any damage that may compromise
ingress protection (e.g. cracks, holes or broken components) the keyboard must be taken
out of commission immediately. Before the device is recommissioned the damaged
components must be replaced.
If you want to use the device in category 1D/2D/3D or EPL Da/Db/Dc, dust deposits of
a thickness exceeding 5 mm must be removed and you have to ensure that no high-
energy loading mechanisms at the operating surface of the keyboard (e.g. pneumatic
particle transport) occur during operation. The keyboard may not be used in environments
where propagating brush discharges may occur.
In case of non-compliance or contravention of the above explosion-protection is no
longer guaranteed and all warranty claims shall be null and void.
10.5Special conditions
Equipotential bonding must be established for the external intrinsically safe circuits of the
accessories to be connected, e.g. display, keyboard or pointer device.
11 Mechanical dimensions
Dimensions in mm, [inch]

Operating Instructions KBDi Keyboards Connections
Page 14 of 24 R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017
11.1Cut-out
12 Connections
Keyboard X72
Cable
Colour
Signal name
Definition
1
Red
+ UB
Power supply +UB
2
White
D-
Data cable D-
3
Green
D+
Data cable D+
4
Black
GND
Power supply GND
Trackball X73, mouse X94, touchpad X95, joystick X96:
Cable
Colour
Signal name
Definition
1
Red
+ UB
Power supply +UB
2
White
D-
Data cable D-
3
Green
D+
Data cable D+
4
Black
GND
Power supply GND

Operating Instructions KBDi Keyboards Maintenance
R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017 Page 15 of 24
13 Maintenance
Associated equipment is subject to maintenance, service and testing
according to guidelines 1999/92/EC, IEC/EN 60079-14, -17, -19 and
BetrSichVer (Betriebssicherheitsverordnung - Ordinance on
Industrial Safety and Health) !
Because the transmission of the keyboards remains reliable and stable over long periods of
time, regular adjustments are not required.
System maintenance should focus on the following:
a. Housing damage
b. Front membrane damage
c. All cables and lines are properly connected and undamaged
14 Troubleshooting
Devices operated in hazardous areas must not be modified. Repairs
may only be carried out by qualified, authorized staff specially trained
for this purpose.
Repairs may only be carried out by specially trained staff who are
familiar with all basic conditions of the applicable user regulations
and –if requested –have been authorized by the manufacturer.
14.1 Repairs / hazardous substances
An error description must be enclosed with any units returned to R. STAHL HMI Systems GmbH
for repairs.
Remove all material residues. Please pay particular attention to the seal grooves and slits
where material residues may be lodged. We have to ask you not to return a unit if you are
unable to completely remove any hazardous substances. We shall bill you for any costs arising
from insufficiently cleaned keyboards, such as disposal or damage to persons (chemical burns,
etc.).
15 Disposal
Disposal of packaging and used parts is subject to regulations valid in whichever country the
device has been installed.
The disposal of devices sold after August 13th, 2005, and installed in countries under the
jurisdiction of the EU is governed by directive (amendment) 2012/19/EU on waste electrical and
electronic equipment (WEEE). Under this directive, HMI devices are listed in category 9
(monitoring and control instruments).
We shall take back our devices according to our General Terms and Conditions.
15.1RoHS directive 2011/65/EC
The revised version of the RoHS (restriction of hazardous substances) 2002/95/EC directive,
directive 2011/65/EC, extends its area of application to all electric and electronic products.
The keyboards (category 9 –monitoring and controlling devices) conform with the requirements
from RoHS directive 2011/65/EU, dated 03.01.2013.
NOTICE
NOTICE

Operating Instructions KBDi Keyboards Front panel resistance
Page 16 of 24 R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017
16 Front panel resistance
This section contains information on the resistance of the keyboards
to various environmental factors. These have an impact on the
mechanical, thermal and chemical stability of the operator interfaces.
The keyboard was tested for chemical resistance according to DIN
42115. At room temperature and with a duration of exposure of 2
hours, the keyboard was shown to be resistant to the listed
chemicals without any visible changes.
16.1Materials
Application
Material
Keyboard plate
Aluminum
Keyboard foil
Polyester
Housing
Steel
Seal
Polyurethane
16.2Material properties
The selection of chemicals listed here is not exhaustive.
Because of the numerous chemical substances available on the
market, these lists can only represent a selection.
16.2.1 Keyboard foil (Polyester)
Property
Chemical material
class / group
Chemical substances
Test method
Chemical
Chemical
resistance
Alcohols
Ethanol
Isopropyl alcohol
Methanol
DIN 42115
DIN 53778/B1
Aromatic hydrocarbons
Benzene
Toluene
Xylene
Ketones
Acetone
Methyl ethyl ketone
Diluted acids
Formic acid <85%
Phosphoric acid <75%
Hydrochloric acid <10%
Nitric acid <52%
Household chemicals
Pril <1%
Oils
Petrol 60/95
Turpentine
No specific material
class
Chloroform
Water-based felt marker
Coffee
Ketchup
Ballpen
Lip stick
Methylene chloride
Nail polish (with actone)
Mustard
Tea
Ink
Water
NOTICE
NOTICE

Operating Instructions KBDi Keyboards Front panel resistance
R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017 Page 17 of 24
Hydrogen peroxid <10%
Property
Resistance
Test method
Mechanic (keyboard)
Service life after
imprint
Operating force
folding resistance
>1 Mio touches
max. 50 N
> 14000 folding operations
Thermal
Shrinkage
≤0,5% TD
≤ 1,0% MD
130°C/30 min

Operating Instructions KBDi Keyboards Declaration of EC conformity
Page 18 of 24 R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017
17 Declaration of EC conformity

Operating Instructions KBDi Keyboards Declaration of EC conformity
R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017 Page 19 of 24

Operating Instructions KBDi Keyboards Release Notes
Page 20 of 24 R. STAHL HMI Systems GmbH / OI_KBDi_USB_en_V_01_00_03 / 13.06.2017
18 Release Notes
The chapter entitled "Release Notes" contains all the changes made in every version of the
operating instructions.
Version 01.00.00
Original version of the operating instructions
Version 01.00.01
Renew Disclaimer
Changing address and telephone numbers
Inclusion of chapter "specific markings"
Changing of all markings according to the new definition
Changing of content "Preface"
Changing of content "Device function"
Renew "Conformity to standards"
Addition of certifications according to NEC and CEC
Changing of certification from GOST-R into TR
Changing of section "Marking"
Adaptation section "Disposal" according to the newest WEEE and RoHS directive
Renew Declaration of EC conformity
Text-, layout- and formal corrections
Version 01.00.02
Addition of standards concerning IP protection in "Technical Data"
Version 01.00.03
Addition of Warning "High Temperature" in section "Warnings"
Adaption section "RoHS directive" with device conformity
Text and layout corrections