Stairville LED Colour Flood 10W RGB User manual

LED Colour Flood
10W / 30W RGB
LED floodlight
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
10.08.2015, ID: 274069_274070 (V2)

Table of contents
1 General information................................................................................................................................. 4
1.1 Further information........................................................................................................................... 5
1.2 Notational conventions.................................................................................................................... 6
1.3 Symbols and signal words............................................................................................................... 6
2 Safety instructions..................................................................................................................................... 9
3 Features....................................................................................................................................................... 14
4 Installation and operation.................................................................................................................. 15
5 Components and functions................................................................................................................ 19
6 Technical specifications....................................................................................................................... 21
7 Cleaning....................................................................................................................................................... 22
8 Protecting the environment.............................................................................................................. 23
Table of contents
LED Colour Flood 10W / 30W RGB
3

1 General information
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General information
LED floodlight
4

1.1 Further information
On our website (www.thomann.de) you will find lots of further information and details on the
following points:
Download This manual is also available as PDF file for you to download.
Keyword search Use the search function in the electronic version to find the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the
customer service will gladly assist you.
General information
LED Colour Flood 10W / 30W RGB
5

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
General information
LED floodlight
6

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – suspended load.
General information
LED Colour Flood 10W / 30W RGB
7

Warning signs Type of danger
Warning – danger zone.
General information
LED floodlight
8

2 Safety instructions
This device is intended to be used as an electronic illumination effect using LED technics. The
device is designed for professional use and is not suitable for use in households. Use the
device only as described in this user manual. Any other use or use under other operating con‐
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
LED Colour Flood 10W / 30W RGB
9

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
Safety
Safety instructions
LED floodlight
10

DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or fire. If in doubt, seek advice from a regis‐
tered electrician.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
Safety instructions
LED Colour Flood 10W / 30W RGB
11

NOTICE!
Risk of fire
Do not cover the device nor any ventilation slots. Do not place the device near
any direct heat source. Keep the device away from naked flames.
NOTICE!
Voltage supply
Connect the device directly to the power grid. It must not be connected to a
dimmer.
Before connecting the device, you have to ensure that the rated voltage indicated
on the device matches the voltage of the power grid available in the operating
place. You must also take care that the power grid is protected by a residual cur‐
rent circuit breaker. Failure to do so can result in damage to the device and injury
to the user.
In case a thunderstorm is coming up or you're not going to use the device for a
longer period of time, disconnect it from the power grid to reduce the risk of elec‐
tric shock and fire.
Safety instructions
LED floodlight
12

NOTICE!
Risk of fire due to incorrect polarity
Incorrectly inserted batteries may destroy the device or the batteries.
Ensure that proper polarity is observed when inserting batteries.
NOTICE!
Possible damage by leaking batteries
Leaking batteries can cause permanent damage to the device.
Take batteries out of the device if it is not going to be used for a longer period.
Safety instructions
LED Colour Flood 10W / 30W RGB
13

3 Features
The LED floodlight is ideal for professional lighting applications, for example, at events, on
stage, in theatres or discotheques
Special features of the device:
nInfrared remote control
nWhite, basic colours red, green, blue and mixed colours are selectable
nBuilt-in automatic show programmes
nSuitable for outdoor application due to protection type IP65
Features
LED floodlight
14

4 Installation and operation
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
Installation and operation
LED Colour Flood 10W / 30W RGB
15

NOTICE!
Risk of overheating
Always ensure sufficient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
You can install the device standing or hanging upside down. When in use, the device must be
mounted at a solid surface or clamped to an approved truss. Use the openings of the bracket
provided for mounting.
Work from a stable platform whenever you install or move the device or when you perform
any kind of maintenance. Block access under the work area.
Mounting options
Installation and operation
LED floodlight
16

The safety cable must be attached to the bracket.
Please note that this device must not be connected to a dimmer.
The infrared sensor for the IR remote control signal is connected to the device via a non-
removable cable. Make sure that there is no objects between the the two IR sensors which may
cause interference problems .
Establish all connections as long as the unit is switched off. Use the shortest possible high-
quality cables for all connections.
Infrared sensor for the IR
remote control signal.
Installation and operation
LED Colour Flood 10W / 30W RGB
17

Press the lock of the battery holder to the centre of the housing and pull out the battery holder
like a drawer. Insert the battery. The battery is correct if the positive pole points to the housing
base of the remote control. Slide the battery holder back into the remote until it clicks into
place.
When shipping, the battery is already installed in the remote and protected against discharge
by a transparent plastic foil. Remove the plastic foil prior to first use.
Inserting the battery into the
remote control
Installation and operation
LED floodlight
18

5 Components and functions
1[ON]/[OFF]
Buttons to switch the unit on or off.
2 Brightness control.
3 Colour selection buttons.
Use the
n[W] button for white light,
n[R], [G] or [B] button for the basic colours red, green and blue,
nthe coloured buttons to directly select a mixed colour.
4[FLASH]
Automatic change of all colours.
5[STROBE]
No function.
Remote control
Components and functions
LED Colour Flood 10W / 30W RGB
19

6[FADE]
Fast automatic change of all colours with blending effect.
7[SMOOTH]
Slow automatic change of all colours with blending effect.
Components and functions
LED floodlight
20