Stairville CLB2.4 Compact User manual

CLB2.4 Compact
LED PAR System
LED lighting set
user manual

Musikhaus Thomann
Treppendorf 30
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
29.01.2015, ID: 349574

Table of contents
1 General notes............................................................................................................................................... 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 7
2 Safety instructions..................................................................................................................................... 9
3 Features....................................................................................................................................................... 13
4 Installation.................................................................................................................................................. 14
5 Starting up.................................................................................................................................................. 18
6 Connections and operating elements........................................................................................... 21
7 Operating.................................................................................................................................................... 24
7.1 Operating on the unit..................................................................................................................... 24
7.2 Menu overview................................................................................................................................. 32
7.3 Foot switch functions..................................................................................................................... 33
7.4 Remote control functions............................................................................................................. 33
7.5 Functions in DMX mode 1, 3-channel mode.......................................................................... 34
Table of contents
CLB2.4 Compact LED PAR System
3

7.6 Functions in DMX mode 2, 4-channel mode.......................................................................... 34
7.7 Functions in DMX mode 3, 8-channel mode.......................................................................... 35
7.8 Functions in DMX mode 4, 14-channel mode....................................................................... 36
7.9 Functions in DMX mode 5, 2-channel mode.......................................................................... 38
7.10 Functions in DMX mode 6, 7-channel mode....................................................................... 41
8 Technical specifications....................................................................................................................... 43
9 Plug and connection assignments.................................................................................................. 45
10 Troubleshooting...................................................................................................................................... 46
11 Cleaning....................................................................................................................................................... 48
12 Protecting the environment.............................................................................................................. 49
Table of contents
LED lighting set
4

1 General notes
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General notes
CLB2.4 Compact LED PAR System
5

1.1 Further information
On our website (www.thomann.de) you will find lots of further information and details on the
following points:
Download This manual is also available as PDF file for you to download.
Keyword search Use the search function in the electronic version to find the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the
customer service will gladly assist you.
General notes
LED lighting set
6

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’, ‘OFF’.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
Displays
General notes
CLB2.4 Compact LED PAR System
7

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – danger zone.
General notes
LED lighting set
8

2 Safety instructions
This device is intended to be used as an electronic illumination effect using LED technics. Use
the device only as described in this user manual. Any other use or use under other operating
conditions is considered to be improper and may result in personal injury or property damage.
No liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Intended use
Safety
Safety instructions
CLB2.4 Compact LED PAR System
9

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or fire. If in doubt, seek advice from a regis‐
tered electrician.
Safety instructions
LED lighting set
10

WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
NOTICE!
Risk of fire
Do not cover the device nor any ventilation slots. Do not place the device near
any direct heat source. Keep the device away from naked flames.
Safety instructions
CLB2.4 Compact LED PAR System
11

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or fire.
Safety instructions
LED lighting set
12

3 Features
The LED lighting set is particularly suitable for professional lighting tasks, for example at
events, on rock stages, in theatres and musicals. It's characterized by an extraordinary light
output and a variety of control options.
n432 × 10 mm LEDs on four flat PARs
nControl via DMX (6 modes), buttons and display on the unit, IR remote control and foot
switch (optional accessory)
n14 preprogrammed automatic shows
nSound control
nStand-alone mode
nMaster / Slave mode
nThermal protection
nCarrying case included
Features
CLB2.4 Compact LED PAR System
13

4 Installation
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
NOTICE!
Risk of overheating
Always ensure sufficient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
Installation
LED lighting set
14

NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
fiers.
Installation
CLB2.4 Compact LED PAR System
15

The four spots are pre-assembled on the T bar. Attach the T Bar on a tripod and connect the
footswitch unit (tripod and footswitch not included).
Pre-assembled spots
Installation
LED lighting set
16

A Locking screws to fix the height and inclination angle.
B Locking screw to fix the spots on the T bar and the horizontal alignment (beam
direction).
C Electrical connection of the spots on the T bar (pre-assembled).
Installation
CLB2.4 Compact LED PAR System
17

5 Starting up
Establish all connections as long as the unit is switched off. Use the shortest possible high-
quality cables for all connections.
Starting up
LED lighting set
18

Connect the DMX input of the device to the DMX output of a DMX controller or other DMX
device. Connect the output of the first DMX device to the input of the second and so on, to
form a series connection.
Such a chain may consist of up to 30 DMX devices. Make sure that the output of the last device
in the chain is terminated by a resistor (110 Ω, ¼W).
Connections in ‘DMX’ mode
Starting up
CLB2.4 Compact LED PAR System
19

If the unit is in DMX mode and a DMX controller is connected and turned on, the ‘d’ is flashing
in the first digit of the display.
When you configure a group of devices in ‘Master / Slave’ mode, the first device controls the
others and allows an automatic, music-controlled and synchronized show. This feature is espe‐
cially useful to start a show without much programming. Connect the DMX output of the
master unit to the DMX input of the first slave unit. Then connect the DMX output of the first
slave unit to the DMX input of the second slave unit and so on (maximum 30 slaves).
DMX indicator
Connections in ‘Master /
Slave‘ mode
Starting up
LED lighting set
20