Stahl 6125 Series User manual

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Operating instructions
Additional languages www.r-stahl.com
EN
Floodlight LED
Series 6125

2Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Contents
1 General Information ............................................................................................3
1.1 Manufacturer .......................................................................................................3
1.2 Information regarding the operating instructions .................................................3
1.3 Conformity with standards and regulations .........................................................3
2 Explanation of the symbols .................................................................................4
2.1 Symbols in these operating instructions .............................................................4
2.2 Warning notes .....................................................................................................4
2.3 Symbols on the device ........................................................................................5
3 Safety notes ........................................................................................................5
3.1 Operating instructions storage ............................................................................5
3.2 Safe use ..............................................................................................................5
3.3 Intended Use .......................................................................................................6
3.4 Modifications and alterations ..............................................................................6
4 Function and device design ................................................................................6
4.1 Function ..............................................................................................................6
4.2 Device design .....................................................................................................7
5 Technical data .....................................................................................................8
6 Transport and storage .......................................................................................11
7 Mounting and installation ..................................................................................11
7.1 Dimensions / fastening dimensions ..................................................................11
7.2 Mounting / dismounting, operating position ......................................................12
7.3 Installation .........................................................................................................13
8 Commissioning .................................................................................................16
9 Maintenance, Overhaul, Repair ........................................................................17
9.1 Maintenance .....................................................................................................18
9.2 Repair ...............................................................................................................19
9.3 Returning the device .........................................................................................19
10 Disposal ............................................................................................................20
11 Accessories and Spare parts ...........................................................................20

251652 / 612560300010
2018-01-12·BA00·III·en·04
General Information
3
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
1 General Information
1.1 Manufacturer
1.2 Information regarding the operating instructions
ID-No.: 251652 / 612560300010
Publication Code: 2018-01-12·BA00·III·en·04
The original instructions are the English edition.
They are legally binding in all legal affairs.
1.3 Conformity with standards and regulations
See certificates and EU Declaration of Conformity: www.stahl-ex.com.
The device has IECEx approval. See IECEx homepage: http://iecex.iec.ch/
Further national certificates can be downloaded via the following link:
https://r-stahl.com/en/global/products/support/downloads/.
R. Stahl Schaltgeräte GmbH
Am Bahnhof 30
74638 Waldenburg
Germany
R. STAHL (P) LTD., Plot No. - 5
Malrosapuram Road, Sengundram Indl. Area
Singaperumal Koil, Kancheepuram Dist.,
Tamil Nadu – 603 204, INDIA
Phone:
Fax:
Internet:
E-mail:
[phone]
[phone]
www.r-stahl.com
[email protected]
Phone:
Fax:
Internet:
E-mail:
[phone]
[phone]
www.rstahl.net
[email protected]

Explanation of the symbols
4251652 / 612560300010
2018-01-12·BA00·III·en·04
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
2 Explanation of the symbols
2.1 Symbols in these operating instructions
2.2 Warning notes
Warnings must be observed under all circumstances, in order to minimize the risk due to
construction and operation. The warning notes have the following structure:
• Signalling word: DANGER, WARNING, CAUTION, NOTICE
• Type and source of danger/damage
• Consequences of danger
• Taking countermeasures to avoid the danger or damage
Symbol Meaning
Tips and recommendations on the use of the device
General danger
Danger due to explosive atmosphere
Danger due to energised parts
Risk of damage to the eyes caused by optical radiation
DANGER
Danger to persons
Non-compliance with the instruction results in severe or fatal injuries to
persons.
WARNING
Danger to persons
Non-compliance with the instruction can result in severe or fatal injuries to
persons.

251652 / 612560300010
2018-01-12·BA00·III·en·04
Safety notes
5
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
2.3 Symbols on the device
3 Safety notes
3.1 Operating instructions storage
• Read the operating instructions carefully.
• Store the operating instructions at the mounting location of the device.
• Observe applicable documents and operating instructions of the devices to be
connected.
3.2 Safe use
• Read and observe the safety notes in these operating instructions!
• Observe characteristic values and rated operating conditions on the rating and data
plates!
• Observe additional information plates on the device!
• Use the device in accordance with its intended and approved purpose only!
• We cannot be held liable for damage caused by incorrect or unauthorized use or by
non-compliance with these operating instructions.
• Before installation and commissioning, make sure that the device is not damaged!
• Work on the device (installation, maintenance, overhaul, repair) may only be carried
out by appropriately authorized and trained personnel.
CAUTION
Danger to persons
Non-compliance with the instruction can result in light injuries to persons.
NOTICE
Avoiding material damage
Non-compliance with the instruction can result in material damage to the device and / or
its environment.
Symbol Meaning
05594E00
CE marking according to the currently applicable directive.
02198E00
According to marking, device approved for hazardous areas.

Function and device design
6251652 / 612560300010
2018-01-12·BA00·III·en·04
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
3.3 Intended Use
The LED floodlight 6125 is equipment
• for stationary mounting
• for use in Zones 1, 21, 2, 22 and in the safe area
• can be used indoors and outdoors
• for lighting areas, work spaces and objects
3.4 Modifications and alterations
4 Function and device design
4.1 Function
• for lighting areas, work spaces and objects
DANGER
Explosion hazard due to modifications and alterations to the device!
Non-compliance results in severe or fatal injuries.
• Do not modify or alter the device.
DANGER
Explosion hazard due to improper use!
Non-compliance results in severe or fatal injuries.
• Use the device only in accordance with the operating conditions de-
scribed in these operating instructions.
• Use the device only for the intended purpose specified in these operat-
ing instructions.

251652 / 612560300010
2018-01-12·BA00·III·en·04
Function and device design
7
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
4.2 Device design
17562E00
1 - Cable glands 6 - Seal
2 - Mounting bracket 7 - Luminaire glass cover
3 - Connection terminal 8 - Mounting screws
4 - Heat sink (only for 210 W version) 9 - Enclosure cover
5 - LEDs 10 - LED-Driver 1

Technical data
8251652 / 612560300010
2018-01-12·BA00·III·en·04
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
5 Technical data
Explosion Protection
Global (IECEx)
Gas and dust IECEx EPS 15.0087
Ex db eb op is IIC T4 Gb
Ex tb op is IIIC T*°C Db
Europe (ATEX)
Gas and dust EPS 15 ATEX 1 114
E II 2G Ex db eb op is IIC T4 Gb
E II 2D Ex tb op is IIIC T*°C Db
Certifications and certificates
Certificates IECEx, ATEX, India (PESO)
Technical Data
Electrical data
Electronic balast
Rated voltage AC: 220 ... 240 V ±10 %; 50 ... 60 Hz
Rated current
Inrush current
Power factor > 0.95
THD ( 10 %
Type Power Ambient
temperature
Max. surface
temperature
6125/1...-23..-....-...
6125/1...-44..-....-...
120 W
210 W
( +60 °C 95 °C
6125/1...-23..-....-... 120 W ( +50 °C 80 °C
6125/1...-44..-....-... 210 W ( +45 °C 80 °C
Ambient temperature
Power -60 ... -40 °C -40 ... +60 °C
120 W 0.60 A 0.54 A
210 W 1.00 A 0.94 A
120 W Version 210 W Version
Ipeak (measured at 50 % Ipeak)62 A; ãt = 330 ms 124 A; ãt = 330 ms
max. light fittings per circuit breaker
Type B Type C Type B Type C
10 A 4824
16 A 8 14 4 7
20 A 11 19 5 9
25 A 20 23 10 11

251652 / 612560300010
2018-01-12·BA00·III·en·04
Technical data
9
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Luminous characteristics
Values apply to Ta = +25 °C.
Luminous flux
decrease
at ambient temperature
20035E00
Ambient conditions
Operating
temperature range
-60 ... +60 °C *
* Note: Possible to operate the luminaire at -60°C, provided the luminaire is
switched on at -40°C. Delay of 10 seconds below -40 °C during cold start.
Storage temperature -40 ... +75 °C
Technical Data
6125/11..-2 6125/11..-4
Power consumption [W] 120 210
Colour rendering [CRI] ) 70 ) 70
Colour temperature [K] 5,700 5,700
wide beam
Luminous flux [lm] 11,763 19,658
Luminaire efficiency [lm/W] 98 94
medium beam
Luminous flux [lm] 12,669 20,966
Luminaire efficiency [lm/W] 105 99
narrow beam
Luminous flux [lm] 12,081 19,979
Luminaire efficiency [lm/W] 101 95
100 %
85 %
70 %
55 %
40 %
25 % 30 °C 35 °C 40 °C 45 °C 50 °C 55 °C 60 °C
115 %
120 W Version
210 W Version

Technical data
10 251652 / 612560300010
2018-01-12·BA00·III·en·04
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Service life
Mechanical data
Degree of protection IP66 (IEC 60529)
Protection class I (with internal PE connection)
Impact strength
(IK code)
IK10 (IEC 62262)
Material
Enclosure
Colour Colour white, similar to RAL 9010
Seal Foamed silicone in luminaire cover
Lamp cover Toughened glass
Bracket Sheet steel, single powder-coated
or
Stainless steel SS316L (1.4404 or V4A) without powder coating
Enclosure lock Pan head screw, M6, stainless steel
Hinged enclosure cover
Mounting / Installation
Cable entry 1 x cable glands Series 8161
1 x stopping plugs Series 8290
Connection
Loop in/loop out max. 12 A
Technical Data
Ambient temperature Ta
( +40 °C +45 °C +50 °C +55 °C +60 °C
L70B10C10 100,000 h 80,000 h 80,000 h 60,000 h 50,000 h
LxByCz
At the end of the service life:
- Luminous flux decreases by “x” percent.
- up to "y" percent of all luminaires fall below "x"
- up to "z" percent of all luminaires break down completely
6125/....-....-....-.11 Sheet steel, powder-coated
6125/....-....-....-.42 Stainless steel 1.4404 (V4A), with powder coating
Standard: 5-pole (2x L1, 2x L2, 2x L3, 2x N, 2x PE)
Spring clamp terminals
0.75 ... 4 mm2 solid / stranded
Stripping length: 10 ... 11 mm
Optional: 5-pole (2x L1, 2x L2, 2x L3, 2x N, 2x PE)
Spring clamp terminals
0.75 ... 4 mm2 finely and extra finely stranded
0.75 ... 6 mm2 solid
Stripping length: 13 ... 15 mm

251652 / 612560300010
2018-01-12·BA00·III·en·04
Transport and storage
11
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Alternative material:
Enclosure:
• stainless steel SS304 (1.4301 or V2A) single powder-coated
• stainless steel SS316L (1.4404 or V4A) without powder coating
Bracket:
• stainless steel SS304 (1.4301 or V2A) without powder-coated
6 Transport and storage
• Transport and store the device only in the original packaging.
• Store the device in a dry place (no condensation) and vibration-free.
• Do not drop the device.
7 Mounting and installation
7.1 Dimensions / fastening dimensions
DANGER
Explosion hazard due to incorrect installation of the device!
Non-compliance results in severe or fatal injuries.
• Carry out installation strictly according to the instructions and national
safety and accident prevention regulations to maintain the explosion
protection.
• Select and install the electrical device so that explosion protection is not
affected due to external influences, i.e. pressure conditions, chemical,
mechanical, thermal and electric impact such as vibration, humidity and
corrosion (see IEC/EN 60079-14).
• The device must only be installed by trained qualified personnel who is
familiar with the relevant standards.
Dimensional Drawings (All Dimensions in mm [inches]) - Subject to Alterations
18200E00
18201E00
Floodlight Series 6125
with cooling element
(210 W version)
Floodlight Series 6125
without cooling element
(120 W version)
400 15,75[]
600 23,62[]
89,50 3,52[]
133,50 [5,26]
180,50 [7,11]
400 15,75[]
600 23,62[]
89,50 3,52[]
180,50 [7,11]

Mounting and installation
12 251652 / 612560300010
2018-01-12·BA00·III·en·04
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
7.2 Mounting / dismounting, operating position
• suitable for use indoors and outdoors
• designed for wall, ceiling, pole mounting with bracket
• torque value between bracket and floodlight 10 Nm
17561E00
Mounting bracket
DANGER
Explosion hazard due to inadmissible heating!
Non-compliance results in severe or fatal injuries.
• Avoid external heat sources and/or direct sunlight (risk of change of
temperature class or change of maximum permissible surface
temperature).
• Do not exceed the maximum ambient temperature due to external heat
sources (premature failure of equipment).
CAUTION
Risk of damage to the eyes caused by optical radiation!
Minor injuries are possible!
• The minimum distance for the narrow beam version between the
luminaire and the viewer's eyes must be 8.23 m.
Dimensional Drawings (All Dimensions in mm [inches]) - Subject to Alterations
60 [2,36]
3 x 13Ø
[3 x 0,51]Ø
405 [15,94]
380 [14,96]
445 [17,52]
250[9,84]
20 [0,79]
3 [0,12]
R 20 [R 0,79]
363 [14,29]
363 [1,38]
8,50Ø
[Ø0,33]
13 x 8,50Ø
[13 x 0,33]Ø

251652 / 612560300010
2018-01-12·BA00·III·en·04
Mounting and installation
13
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
7.3 Installation
7.3.1 Opening and Closing of the Enclosure
Opening the luminaire
• (1) loosen the four mounting screws.
• (2) carefully open the enclosure cover.
• (3) open the enclosure cover fully.
DANGER
Explosion hazard due to hot built-in components!
Accidents or fatal injury are almost certain to happen!
• Only open the enclosure in switched-off state.
• The device must be allowed to cool down for at least 15 minutes before
opening it.
DANGER
Risk of electric shock due to improper opening!
Non-compliance results in severe or fatal injuries.
• Open luminaires without switch only in de-energized state
(see information plate on the lock)!
NOTICE
Danger due to electrostatic discharge.
Electronic components can be destroyed if touched.
• Do not touch the LED-PCBs!
17990E00
3

Mounting and installation
14 251652 / 612560300010
2018-01-12·BA00·III·en·04
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Closing the luminaire
• (4) liften the enclosure cover.
• (5) carefully close the enclosure cover.
• (6) securely tighten the four screws (torque value 5 Nm).
7.3.2 Cable entries
The standard luminaire is delivered with 2 entries, 1 cable gland, 1 cable entry and
1 stopping plugs.
Tightening torques for components from R. STAHL Schaltgeräte GmbH
Luminaires with installed cable entries and stopping plugs from
R. STAHL Schaltgeräte GmbH must be tightened using the following values:
17991E00
Tightening torque
Connection thread Pressure screw
Cable entry
8161
M20 x 1.5 2.3 Nm 1.5 Nm
M25 x 1.5 3.0 Nm 2.0 Nm
Stopping plugs
8290
M20 x 1.5 1.0 Nm –
M25 x 1.5 1.5 Nm –
5
4
6

251652 / 612560300010
2018-01-12·BA00·III·en·04
Mounting and installation
15
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Luminaires with approved cable entries and stopping plugs; not supplied by
R. STAHL Schaltgeräte GmbH
Please observe the following:
• the required dust resistance!
• the required type of protection!
• the required temperature resistance!
• the IP degree of protection according to the rating plate!
• the operating instructions of the cable entries and stopping plugs!
• the required tightening torques!
• the range of the permissible cable diameter!
7.3.3 Electrical connections
Electrical connection
Observe the maximum clamping possibility of the connecting terminals (see chapter
"Technical data").
Note:
• Clamping must be carried out precisely!
• Do not clamp any part of the conductor insulation!
• Do not interchange the conductors!
• Observe the technical regulations when connecting the conductor!
• Clamp the conductor firmly.
DANGER
Explosion hazard due to impermissible cable entries and stopping plugs!
Non-compliance results in severe or fatal injuries.
• Only use separately certified cable entries and stopping plugs.

Commissioning
16 251652 / 612560300010
2018-01-12·BA00·III·en·04
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Connection terminals
Loop in & Loop out wiring
8 Commissioning
Before commissioning, ensure the following:
• Check the mounting and installation.
• Inspect enclosure for damage.
• If necessary, remove foreign bodies.
• If necessary, clean the connection chamber.
• Check if the conductors have been inserted correctly.
• Check if all screws and nuts have been tightened firmly.
Standard:
Spring clamp terminals
Optional:
Spring clamp terminals
Clamping range:
0.75 ... 4 mm2 solid and finely stranded
(2 free clamping units per pole available)
Klemmbereich:
0.75 ... 4 mm2 finely and extra finely
stranded
0.75 ... 6 mm2 solid
(2 free clamping units per pole available)
Stripping length:
10 ... 11 mm
Stripping length:
13 ... 15 mm
15516E00
18616E00
L1, L2, L3 = phase
N = neutral conductor
PE = protective conductor
Loop in & Loop out wiring for max. 12 A.
DANGER
Explosion hazard due to incorrect installation!
Non-compliance results in severe or fatal injuries.
• Check the device for proper installation before commissioning.
• Comply with national regulations.
N
L1
L2
L3
L3L2L1
N

251652 / 612560300010
2018-01-12·BA00·III·en·04
Maintenance, Overhaul, Repair
17
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
• Check whether all the cable entries and stopping plugs have been tightened firmly.
• Check if all conductors have been clamped firmly.
• Check if the line voltage and the rated operational voltage are consistent.
• Check if the permissible conductor diameter for the corresponding cable entries have
been used.
• Check if the device is closed according to regulations.
• Check whether the bracket mounting & cover mounting screws are tightened with
proper torque.
9 Maintenance, Overhaul, Repair
NOTICE
Malfunction or device damage caused by condensation.
Non-compliance can result in material damage!
• operate the luminaire continuously or periodically over extended periods of time.
• avoid thermal bridges.
WARNING
Risk of electric shock or malfunctioning of the device due to unauthorized
work!
Non-compliance can result in severe injuries and material damage.
• Work performed on the device must only be carried out by appropriately
authorized and qualified electricians.
• To be carried out as per EN60079-17 and as per EN60079-19.
DANGER
Explosion hazard due to hot built-in components!
Accidents or fatal injury are almost certain to happen!
• Only open the enclosure in switched-off state.
• The device must be allowed to cool down for at least 15 minutes before
opening it.
NOTICE
Danger due to electrostatic discharge.
Electronic components can be destroyed if touched.
• Do not touch the LED-PCBs!

Maintenance, Overhaul, Repair
18 251652 / 612560300010
2018-01-12·BA00·III·en·04
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
9.1 Maintenance
• Determine the type and extent of inspections in compliance with the relevant national
regulations.
• Adapt inspection intervals to the operating conditions.
The following tests and measures must be carried out during regular maintenance.
DANGER
Explosion hazard due to hot built-in components!
Accidents or fatal injury are almost certain to happen!
• Only open the enclosure in switched-off state.
• The device must be allowed to cool down for at least 15 minutes before
opening it.
NOTICE
Moisture inside the light fitting
can result in damage to electric and electronic components.
• Remove moisture with a cloth!
• Determine the source and eliminate the cause!
• Avoid condensation and thermal bridges!
Observe the relevant national regulations in the country of use.
Check Measures
the permissible ambient temperature If exceeding the permissible ambient
temperature or falling below the device
must be taken out of operation.
the enclosure components for formation of
cracks and damage.
Replace the exchangeable enclosure
components. If the enclosure components
are non-exchangeable, the device must be
taken out of operation.
its intended use If the device is not used according to its
intended use, it must be taken out of
operation.
if the conductors are clamped properly clamp loose conductors tightly.
the cables for ageing and damage replace damaged or aged cables.

251652 / 612560300010
2018-01-12·BA00·III·en·04
Maintenance, Overhaul, Repair
19
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
9.1.1 Cleaning
• Clean the device only with a cloth, brush, vacuum cleaner or similar items.
• When cleaning with a damp cloth, use water or mild, non-abrasive, non-scratching
cleaning agents.
• Do not use aggressive detergents or solvents.
9.2 Repair
9.3 Returning the device
Use the "Service form" to return the device if repair or service is required. On the internet
site "www.stahl-ex.com" under "Downloads > Customer service":
• Download the service form.
• Fill out the service form.
• Send the device along with the service form in the original packaging to
R. STAHL Schaltgeräte GmbH.
Check Measures
the seals for ageing and damage replace damaged, aged and porous seals
and completely change enclosure
components with foamed seal.
the inside and outside of the luminaire for
pollution
clean the luminaire.
DANGER
Explosion hazard due to improper repair!
Non-compliance results in severe or fatal injuries.
• Repair work on the devices must be performed only by
R. STAHL Schaltgeräte GmbH.

Disposal
20 251652 / 612560300010
2018-01-12·BA00·III·en·04
Floodlight LED
Series 6125
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
10 Disposal
• Observe national and local regulations and statutory regulation regarding disposal.
• Separate materials when sending it for recycling.
• Ensure environmentally friendly disposal of all components according to the statutory
regulations.
11 Accessories and Spare parts
NOTICE
Malfunction or damage to the device due to the use of non-original components.
Non-compliance can result in material damage.
• Use only original accessories and spare parts from R. STAHL Schaltgeräte GmbH.
For accessories and spare parts, see data sheet on our homepage
www.r-stahl.com.