4. Operation
Plugtheremotecontrolcordintotheslotmarked“REMOTE•
CONTROL”ontherearsideofthefog machine. Plug the power cord
into a grounded electrical outlet.
Turn on the power switch located on the back of the• fog machine.
The red light on the remote control will turn on once the machine is•
plugged into a power outlet and the on/off switch is turned on.
Once the red light comes on the machine must warm-up .This period•
varies depending on conditions but should not take more than 10
minutes under any circumstances.
The green light on the remote control will turn on once the machine is•
readytoproducehaze.Whenthegreenlightturnson,themachinemay
be operated using the remote control.
The fog machine is controlled via the remote control. Please refer to the•
section titled Remote Control Operation for detailed instruction on the
various functions available.
Prior to the green light turning on the machine will not haze and the•
functions will not respond.
WhentheFoggerdoesnothaveanyliquidinthemachinethePCboard•
will shut off the pump so that the machine will not be damaged. The
pumpwillremainoffuntiluidisaddedtothemachine.
Important:
Alwaysmonitortankuidlevelduringoperation.Thefogmachinecan
sufferdamagewhenrunwithoutuid.Ifthemachinedoesnotfunction
afterhavingbeenrunwithoutuid,pleasecontactyourFoggerdealerfor
service.
Remote Control Operation
TheINTERVALknobadjuststhetimebetweendischargeswhen•
the timer function is engaged. The range is from 10 seconds ~ 200
seconds.
Thesecondknoblabelled“VOLUME”controlsthevolumeofhaze•
produced. The range is from 0% ~ 100% of maximum output.
TheyellowTIMERbuttoncontrolsthetimerfunction.Depressthebutton•
toactivateit.Whenactivatedtheyellowlightwillturnon.Adjustingthe
interval knob will determine the time between haze output (10~200
seconds). The duration of output is set at 13 seconds. The volume
canbeadjustedusingthevolumeknobtocontroltheamountofhaze