Standby autoeyeXpert PRO Series User manual

Standby RSG UK Limited Phone: [phone] Email: inf[email protected]o.uk Web: www.standbyrsg.co.uk C-10700-A_HW-03/23
When attention matters.
USER GUIDE AEX-ST-DVR-X5
PRO SERIES
12 Channel Mobile Digital Video Recorder
AEX-ST-DVR-X5
User Guide

CONTENTS
1 Product Characteristics 3
1.1 Overview 3
1.2 Specifications 4
1.3 System Diagrams 4
1.4 External Interface 4
1.5 Hard Disk Installation 4
1.6 SIM Card Installation 4
1.7 Definitions of External Cables 4
2 Frequently Asked Questions 5
Notice:
The information in this manual was current when published. Standby RSG UK Limited reserves the right to revise
and improve its products. All specifications are therefore subject to change without any notice.
The purpose of this manual is to aid the user in the operation for our AEX-ST-DVR-X5 12 Channel Mobile DVR.
The user should have a basic understanding of computer operation and basic knowledge of how to connect
peripherals and make some settings.
Guarantee & Warnings:
1) Electrical Apparatus Safety
All installation and operation should comply with local electrical safety norms.
2) Transportation
In the process of transportation, storage and installation, please avoid heavy stress, violent vibration,
impact and water splashing.
3) Installation
Install the equipment in accordance with the requirements, handle carefully. Do not heavily press the
equipment before the MDVR installation is finished.
4) Requirements on Engineers & Technicians
All the work of checking and maintenance should be done by qualified technicians and engineers. We do not
undertake any responsibility caused by unauthorized modifications.
5) Requirements on Environment
The equipment should be installed and stored in a cool and dry place, away from direct sunlight, flammable or
explosive substances, etc. Keep gaps not less than 3cm around the device to facilitate ventilation for cooling.
6) Accessories
Make sure to use accessories from the manufacturer recommended in the attachment. Insulate circuit ground
and metal shell for all the peripherals. Before installation, please open the package and ensure that all parts
are included. If there are any problems, please contact us as soon as possible.
Standby RSG UK Limited Phone: [phone] Email: inf[email protected]o.uk Web: www.standbyrsg.co.uk C-10700-A_HW-03/23
When attention matters.
USER GUIDE AEX-ST-DVR-X5
2

Standby RSG UK Limited Phone: [phone] Email: inf[email protected]o.uk Web: www.standbyrsg.co.uk C-10700-A_HW-03/23
When attention matters.
USER GUIDE AEX-ST-DVR-X5
3
1 Product Characteristics
1.1 Overview
AEX-ST-DVR-X5 is developed from the brand new platform N9M, which is an advanced and
function-extensive Mobile Video Recorder specially designed for network high definition,
analog audio and video input and excellent extension. It uses high-speed processor and
embedded operating system, patented file system 4.0 to ensure the safety and integration
of important data, combining with H. 264 video compression / decompression technology,
network technology and GPS locating technology. It can realize AHD 1080P and 720P
high definition, IP 1080P and 720P high definition, WD1, WHD1, WCIF, D1, HD1, CIF video
recording and vehicle driving information recording, as well as wireless data upload. With
center software it also achieves alarm linkage central monitoring, remote management
and playback analysis. It is powerful with modular design, flexible installation, easy
maintenance and high reliability.
1.2 Specifications
Function Overview Preview, Recording, Playback, Network, Locating
System OS Linux 3.0.8
Control Mode CP4, Easy Check, Network (3G/4G/WIFI), Mouse
Video Input 8 channels AHD (1080P)+4 channel IPC (1080P)
Output 2 channels
Total Resource PAL: 8*720P@25FPS (AHD) +4*1080P@30FPS (IPC)
Or 8*1080P@12FPS (AHD) +4*1080P@30FPS (IPC)
NTSC: 8*720P@30FPS (AHD)+4*1080P@30FPS (IPC)
Or 8*1080P@15FPS (AHD)+4*1080P@30FPS (IPC)
Video Signal Standard Electrical level: 1Vpp Impedance: 75Ω NTSC/PAL Optional
Audio Input 12 channels
Output 2 channels
Audio Signal Standard Electrical level: 2Vpp Input impedance: 4.7kΩ

Standby RSG UK Limited Phone: [phone] Email: inf[email protected]o.uk Web: www.standbyrsg.co.uk C-10700-A_HW-03/23
When attention matters.
USER GUIDE AEX-ST-DVR-X5
4
Display Display Split 1/4/9 Image display
OSD GPS information, alarm, temperature, acceleration, voltage,
device information, software version, MCU version,
network status
Operation Interface Semi-transparent GUI
Recording Video/Audio Compression Video: H.264
Audio: ADPCM, G.711A, G.711U
Image Resolution PAL:
1080P, 720P, WD1 (928X576), WHD1 (928X288),
WCIF (464X288), D1 (704X576), HD1 (704x288),
CIF (352x288);
NTSC:
1080P, 720P, WD1 (928X480), WHD1 (928X240),
WCIF (464X240), D1 (704x480), HD1 (704x240),
CIF (352x240);
Digital:
720P (1280X720)
Image Quality 8 Levels adjustable
Recording Mode Schedule/Alarm (sensor trigger, speed, acceleration, video
loss, temperature)
Pre-recording 0-60minutes
Post-recording 0-30 minutes
Mirror Recording Yes
Playback Playback Channel 4 channels by local playback
Search Mode Date/time, channel, event
Network 3G/4G EVDO/WCDMA/TDD-LTE/FDD-LTE
WIFI 802.11b/g/n
Ethernet RJ45 x 1 (10/100 M/1000M)
IPC Ethernet 6-pin M12 (4x10/100M, PON power supply)
Locating GPS Location tracking, speed detection and time sync
Storage Hard disk Supports 2.5" hard disk up to2TB

Standby RSG UK Limited Phone: [phone] Email: inf[email protected]o.uk Web: www.standbyrsg.co.uk C-10700-A_HW-03/23
When attention matters.
USER GUIDE AEX-ST-DVR-X5
5
Interface USB USB2.0 x 2
SD SD slot x 1
SIM SIM slot x 2
RS232 RS232 X 2
RS485 RS485 X 2
Sensor 8 inputs, 2 outputs
Serial G-sensor (Internal)
Speed 1 channel pulse speed detection
Interface Touch panel CP4 Optional
Intercommunication I MIC interface
VGA VGA x 1
Power Input DC8-36V, ACC
Output 5V@500mA, 12V@500mA
Max Power Consumption 105.3W
Standby Power Consumption ≈0W
Physical Dimension (L x W x H) 295 x 222 x 89 mm (with back cover and shelves)
Characteristics Weight 2.6 kg
Environment Operating Temperature -40℃- +70℃ (With heater) or -10℃- +70℃
Operating Relative Humidity 8%-90%（No Condense）

Standby RSG UK Limited Phone: [phone] Email: inf[email protected]o.uk Web: www.standbyrsg.co.uk C-10700-A_HW-03/23
When attention matters.
USER GUIDE AEX-ST-DVR-X5
6
1.3 System Diagram

Standby RSG UK Limited Phone: [phone] Email: inf[email protected]o.uk Web: www.standbyrsg.co.uk C-10700-A_HW-03/23
When attention matters.
USER GUIDE AEX-ST-DVR-X5
7
1.4 External Interface
1.4.1 Dimensions (Unit: mm)

Standby RSG UK Limited Phone: [phone] Email: inf[email protected]o.uk Web: www.standbyrsg.co.uk C-10700-A_HW-03/23
When attention matters.
USER GUIDE AEX-ST-DVR-X5
8
1.4.2 Front Panel
1.4.3 Rear Panel

Standby RSG UK Limited Phone: [phone] Email: inf[email protected]o.uk Web: www.standbyrsg.co.uk C-10700-A_HW-03/23
When attention matters.
USER GUIDE AEX-ST-DVR-X5
9
Serial Number Print Description
1 DC8-36V Power input
2 Amplifier Amplifier interface
3 Panel Control panel (CP4)
4 LAN Network interface
5 USB USB interface
6 Serial Serial interface
7 GPS GPS antenna interface
8 3G 3G antenna interface
9 4G 4G antenna interface
10 WIFI WIFI antenna interface
11 VGA VGA display
12 A/V A/V input 1-8, A/V output
1.5 Hard Disk Installation

Standby RSG UK Limited Phone: [phone] Email: inf[email protected]o.uk Web: www.standbyrsg.co.uk C-10700-A_HW-03/23
When attention matters.
USER GUIDE AEX-ST-DVR-X5
10
1.6 SIM Card Installation
1.7 Definition of external cables
1.7.1 Alarm cable definition

Standby RSG UK Limited Phone: [phone] Email: inf[email protected]o.uk Web: www.standbyrsg.co.uk C-10700-A_HW-03/23
When attention matters.
USER GUIDE AEX-ST-DVR-X5
11
1.7.2 Video cable definition

Standby RSG UK Limited Phone: [phone] Email: inf[email protected]o.uk Web: www.standbyrsg.co.uk C-10700-A_HW-03/23
When attention matters.
USER GUIDE AEX-ST-DVR-X5
12
1.7.3 Amplifier cable definition
AV IN1 (black: GND) red: +12V/0.5A, white: AUDIO, no colour: VIDEO
AV IN2 (black: GND) red: +12V/0.5A, white: AUDIO, no colour: VIDEO
AV IN3 (black: GND) red: +12V/0.5A, white: AUDIO, no colour: VIDEO
AV IN4 (black: GND) red: +12V/0.5A, white: AUDIO, no colour: VIDEO
AV IN5 (black: GND) red: +12V/0.5A, white: AUDIO, no colour: VIDEO
AV IN6 (black: GND) red: +12V/0.5A, white: AUDIO, no colour: VIDEO
AV IN7 (black: GND) red: +12V/0.5A, white: AUDIO, no colour: VIDEO
AV IN8 (black: GND) red: +12V/0.5A, white: AUDIO, no colour: VIDEO
AV OUT1 (black: GND) red: +12V/0.5A, white: AUDIO, no colour: VIDEO

Standby RSG UK Limited Phone: [phone] Email: inf[email protected]o.uk Web: www.standbyrsg.co.uk C-10700-A_HW-03/23
When attention matters.
USER GUIDE AEX-ST-DVR-X5
13
2 Frequently Asked Questions
2.1 The system won’t start?
Usually this problem results from an incorrect power connection. Please follow below
steps to check the power connection:
1. Check the input power, whether the power wire is connected correctly, whether
the ground wire is connected back to the battery, and whether the fuse on the
power wire is in good condition.
2. Check whether the ACC signal wire input to the power is with voltage higher than 7V.
3. Check whether the lock on the device is in the locked state.
2.2 The MDVR restarts uninterrupted?
Please follow below steps to check it:
1. Check whether the voltage of MDVR is insucient. If the voltage is less than the
start-up voltage of the device, the device will restart.
2. The problem in hard disk/SD card may cause the failure to start. Remove the drive
caddy and check whether it is damaged.
2.3 The device won’t record?
Usually, this problem results from the storage disk or camera. Please follow the
below steps to check it:
1. Check whether the storage disk is installed, whether it is in good contact, and
whether the disk can be read normally in a computer.
2. Check whether the storage disk is formatted. The storage disk should be
formatted before normally storing recorded files.
3. Check whether there is video signal input into the device from camera, and
whether there is video/image on the screen.
2.4 There is audio in the recording?
Please follow below steps to check it:
1. Check whether there is an external pickup, or whether the camera features with
the function of audio collection.
2. Access to Video Channel Settings, check if Audio is set on.
3. There must be video input into the channel for recording and it must record normally.

Standby RSG UK Limited Phone: [phone] Email: inf[email protected]o.uk Web: www.standbyrsg.co.uk C-10700-A_HW-03/23
When attention matters.
USER GUIDE AEX-ST-DVR-X5
14
2.5 The GPS works abnormally?
Please follow below steps to check it:
1. Check whether the GPS antenna is installed correctly. There is a silk print logo on
the GPS antenna holder behind the host device.
2. Check whether the antenna receiver is sheltered. It should not be covered by any
stu, which may cause it not to receive signals.
3. Environmental influence such as tree shades, being inside tunnel, driving near tall
building or elevated roads, thunderstorms or other weather influence, etc. can also
cause signal loss or receiving wrong signals.
2.6 The device can’t shutdown in ignition switch mode?
Please follow below steps to check it:
1. Check if the ACC line connection mode is correct; and check whether there is
voltage on ACC yellow line when the key is turned o.
2. If the device has been set with schedule recording, it can’t shutdown if it is still
during recording time of the task table.
2.7 How to install the WIFI antenna?
The antenna must be installed on unobstructed place of the roof.
2.8 The device cannot be shut down when in ignition ON/OFF mode.
Check if the ACC signal wiring is correct and if there is voltage for ACC signal line
after the key is turned o .
If you have set timing recording, and at the current time it is still in task recording,
the device may be impossible to be shut down.
2.9 GPS anomaly.
Check if the GPS antenna is properly installed. There is silkscreen GPS identification on
the GPS antenna pedestal on the back of the MDVR device. Check if the antenna
connector is blocked and make sure the antenna connector not be covered by other things.
Trees block, being inside the tunnel, driving near tall buildings or viaduct,
thunderstorms and other environmental eects may also cause to receive no GPS
signal or error signal.

Standby RSG UK Limited Phone: [phone] Email: inf[email protected]o.uk Web: www.standbyrsg.co.uk C-10700-A_HW-03/23
When attention matters.
USER GUIDE AEX-ST-DVR-X5
15
2.10 No audio in video files.
See if there is an external microphone, or if the camera cannot capture audio;
Enter into the video channel settings, then check if the audio is open;
Ensure video input and normal recording, on which the audio recording channels must
be based.
2.11 The device doesn’t record.
Make sure the storage part is installed and of fine contact, the data can be read on
PC, and the storage device is not formatted.
Check if there are video signal input to the main device, and whether there are video
images in the channel pictures.
2.12 Why is the MDVR device always in a state of restart?
Check whether the MDVR device voltage is insucient. If the device voltage does
not reach the start voltage, the device will restart.
Hard disk or SD card may cause the MDVR device unable to start. You need to remove
the storage device and then boot up to verify whether it is caused by the storage
device.
2.13 Why does MDVR not start?
Check the device input power to see if the power wiring is correct, if there is ground
wire connected back to the battery, and if the fuse of the power wire is in good
condition;
Check whether there is voltage(more than 7V) on power input ACC signal wire;
Check whether the hard disk key is turned o.
Copyright
Under copyright laws, the content of this manual may not be copied, photocopied, reproduced, translated or
reduced to any electronic medium or machine- readable form, in whole or in part.