Standby T4 User manual

T4 - Manual
Thank you for choosing a product from Standby.
Technical Data
Description Units
Housing PC/PBT
Cable length 50 cm
Supply voltage +10-30VDC
Dimensions 126 mm x 87 mm x 19,5 mm
Recommended fuse 1A
Interface CAN
Ambient temperature
- Operating
- Storage/transport
-20° C to +70° C
-30° C to +80° C
Current consumption max 260mA at operation (1mA at standby mode)
Enclosure rating IP65
Tests performed Tested according to applicable parts of SS-ISO_16750-3 and SS-ISO_16750-4_2010
Approvals ECE R10
Included
60530171
Connector: JAE IL-AG5-6P-S3C1
Pin: JAE IL-AG5-PC1-5000
Mating connector: JAE IL-AG5-6S-S3C1 (Not included)
Mating sleeve: JAE IL-AG5-C1-5000 (Not included)
Connection
1.2.
3.4. 5. 6.
1 2 3 4 5 6
1. Green CAN Low 1
2. Yellow CAN High 1
3. Brown CAN Low 2
4. White CAN High 2
5. Grey Ground
6. Pink +10-30VDC
T4 - Manual
AM60530171A www.standby.eu © Standby AB

Installation
3,5 mm
M3
19
19
15
15
19
19
15
15
Fits to AMPS hole pattern.
Can be used as a drilling template.
Light sensor
Do not cover
Cleaning instruction
•Switch o the screen / device and wait for it to cool down
•Use a clean microber cloth. Avoid rough cloths, towels, paper towels and similar items.
•Moisten the microber cloth with a little water, for stubborn stains a screen cleaner designed for computer screens
can be used.
•Wipe slow and gentle to avoid damage, wipe dry with a dry microber cloth.
•Do not spray water / screen cleaner directly on the unit. Never use a soaked cloth. This prevents moisture from entering
the unit.
Compatible Products
For more information regarding connection to compatible products see:
www.standby.eu/support/manuals
Standby will not be held liable for improper installation or use of this product. Please follow all instructions provided. Professional advice and proper installation of the
Standby products by an authorized Standby Partner are recommended to provide maximum safety and function
T4 - Manual
AM60530171A www.standby.eu © Standby AB