Star Trac Stairmaster 8 Series Configuration guide

Page 2
637-8771 Rev. A
General InformatIon
How to Access Maintenance Mode on Cardio Consoles
Applies to: 8-Series and 4-Series Cardio Consoles
Please see below for instructions on accessing the maintenance mode on the 4-Series and 8-Series cardio
consoles.
8-Series Treadmill / TrailHiker LCD -
No Quick Keys
On the keypad, press “0”, “2”, and “OK”
at the same time, then use the hotbar to
change the menu selection and “OK” to
enter that sub-menu.
SKU(s): 700-0360-XX + 700-0282-XX
8-Series Treadmill LCD - No Quick
Keys
On the keypad, press “0”, “2”, and “OK”
at the same time, then use the hotbar to
change the menu selection and “OK” to
enter that sub-menu.
SKU(s): 700-0288-XX
8-Series Treadmill 10” Touchscreen
Tap the upper left corner of the screen,
then the center of the screen, then the
upper left corner of the screen to access
the maintenance menu.
SKU(s): 700-0379

Page 3
637-8771 Rev. A
General InformatIon
8-Series Treadmill 19” Embedded
1. Tap the upper left corner of the screen,
then the upper right corner of the screen,
then the upper left corner again.
2. On the Password screen, enter “218”
then press “OK”.
SKU(s): 700-0463-XX + 700-0466-XX
8-Series Bike / CrossTrainer / Stepper /
Stepmill LCD
On the keypad, press “0”, “2”, and “OK”
at the same time, then use the hotbar to
change the menu selection and “OK” to
enter that sub-menu.
SKU(s): 700-0283-XX + 700-0396-XX + 700-0303
8-Series Bike / CrossTrainer / Stepper /
Stepmill 10” Touchscreen
Tap the upper left corner of the screen,
then the center of the screen, then the
upper left corner of the screen to access
the maintenance menu.
SKU(s): 700-0378-XX + 00-0380-XX

Page 4
637-8771 Rev. A
General InformatIon
8-Series Bike / CrossTrainer / Stepper /
Stepmill 15” Embedded
1. Tap the upper left corner of the screen,
then the upper right corner of the screen,
then the upper left corner again.
2. On the Password screen, enter “218”
then press “OK”.
SKU(s): 700-0471-XX + 700-0472-XX + 700-0468-XX + 700-0469-XX
4-Series Treadmill / Bike / Crosstrainer
LCD
On the keypad, press “0”, “2”, and “OK”
at the same time, then use the enter
button to enter that sub-menu.
SKU(s): 700-0464-XX + 700-0465-XX
4-Series Treadmill / Bike / Crosstrainer
10” Touchscreen
Tap the upper left corner of the screen,
then the center of the screen, then the
upper left corner of the screen to access
the maintenance menu.
SKU(s): 700-0506-XX + 700-0507-XX

Page 5
637-8771 Rev. A
General InformatIon
4-Series Treadmill / Bike / Crosstrainer
15” Embedded
1. Tap the upper left corner of the screen,
then the upper right corner of the screen,
then the upper left corner again.
2. On the Password screen, enter “218”
then press “OK”.
SKU(s): 700-0508-XX + 700-0510 + 700-0509-XX + 700-0511-XX