Star Grill-Max 50 CHDE User manual

¸
¸
¸
®
ROLLER GRILLS
MODELS
30 CBD, CBDE, CHD, CHDE,
SCBD, SCBDE,SCHD, SCHDE
45 CBD, CHD, SCBD,
SCBDE, SCHD
50 CBD, CBDE,CHD,CHDE,
SCBD, SCBDE, SCHD, CHDE
75 CBD, CBDE, CHD,CHDE,
SCBD, SCBDE, SCHD, SCHDE, SCHDEP
Innite and Electronic Controls
Bun Drawer & Heated Bun Drawer
Installation and
Operation
Instructions
2M-Z9666 Rev. I 6/26/14

22
These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
NOTICE
Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.
Star reserves the right to change specications and product design without
notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.
Due to periodic changes in designs, methods, procedures, policies and
regulations, the specications contained in this sheet are subject to change
without notice. While Star International Holdings Inc., Company exercises
good faith efforts to provide information that is accurate, we are not
responsible for errors or omissions in information provided or conclusions
reached as a result of using the specications. By using the information
provided, the user assumes all risks in connection with such use.
MAINTENANCE AND REPAIRS
Contact your local authorized service agent for service or required maintenance.
Please record the model number, serial number, voltage and purchase date in the area below and have it ready when
you call to ensure a faster service.
SAFETY SYMBOL
Model No.
Serial No.
Voltage
Purchase Date
Business 8:00 am to 4:30 p.m. Central Standard Time
Hours:
Telephone: (314) 678-6303
Fax: (314) 781-2714
E-mail [email protected]
Website: www.star-mfg.com
Service Help Desk
Authorized Service Agent Listing
Reference the listing provided with the unit
or
for an updated listing go to:
Website: www.star-mfg.com
E-mail [email protected]
Mailing Address: Star International Holdings Inc., Company
10 Sunnen Drive
St. Louis, MO 63143
U.S.A

TABLE OF CONTENTS
PAGE NUMBER
GENERAL SAFETY INFORMATION 3
GENERAL INSTALLATION INFORMATION 4
Connection Load 4
GENERAL OPERATING INSTRUCTIONS 5
Cleaning 6
ELECTRONICALLY CONTROLLED:
Start-up, Heating & Programing 7
WARRANTY 8
WIRING DIAGRAM 9 - 12
EXPLODED VIEW 14 - 15
PARTS LIST
30 MODEL SERIES 16 - 17
45 MODEL SERIES 18 - 19
50 MODEL SERIES 20 - 21
75 MODEL SERIES 22 - 23
GENERAL SAFETY INFORMATION
This equipment is designed and sold for commercial use only by personnel trained and experienced
in its operation and is not sold for consumer use in and around the home nor for use directly by the
general public in food service locations.
Before using your new equipment, read and understand all the instructions & labels associated with
the unit prior to putting it into operation. Make sure all people associated with its use understand the
units operation & safety before they use the unit.
All shipping containers should be checked for freight damage both visible and concealed. This
unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If
equipment is received in damaged condition, either apparent or concealed, a claim must be made with
the delivering carrier.
Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a
request for inspection of concealed damage must be made with carrier within 15 days. Be certain to
retain all contents plus external and internal packaging materials for inspection. The carrier will make
an inspection and will supply necessary claim forms.
3
CAUTION

INFINITE CONTROL
MODEL SERIES WATTAGE
30CBD, 30SCBD 1150
30CHD, 30SCHD 1230
45CBD, 45SCBD 1650
45CHD, 45SCHD 1730
50CBD, 50SCBD 1535
50CHD, 50SCHD 1635
75CBD, 75SCBD 1730
75CHD, 75SCHD 1830
ELECTRONIC CONTROL
MODEL SERIES WATTAGE
30CBDE, 30SCBDE 1150
30CHDE, 30SCHDE 1230
45CHDEP 1650
50CBDE, 50SCBDE 1535
50CHDE, 50SCHDE 1635
75CBDE, 75SCBDE 1730
75CHDE, 75SCHDE 1830
75SCHDEP 1920/2560
GENERAL INSTALLATION INFORMATION
The grill should be connected to a wall type receptacle, a direct line or individual branch circuit. An
individual branch circuit is preferred. If connected to an overloaded circuit the grill will not operate
properly. The unit should be level when installed. Models equipped with bun boxes must be level to
utilize the self-closing feature of the bun drawer. Adjustable 4-inch legs are standard on the 75 series
and available for all other models.
This grill is equipped for the voltage shown on the nameplate. It will operate on alternating current
only, however, the specied voltage must be applied.
CONNECTION LOAD:
DO NOT CONNECT TO DIRECT CURRENT (DC).
IMPORTANT
UNLEVEL UNITS COULD RESULT IN HAVING PRODUCT TRAVEL FROM ONE
SIDE TO THE NEXT, OVER A PERIOD OF TIME.
4
WARNING

GENERAL OPERATING INSTRUCTIONS
For specic information regarding ELECTRONIC GRILL OPERATION see page 7.
The main switch located on the control panel controls all the power to the unit. With the main switch
on, the rollers will turn, heat will be supplied to the bun box, but no heat will be supplied to the rollers
unless the heat controls are turned on. The switch is lighted to indicate when the unit is turned on.
For exibility the heating section of the grill is divided into two individually controlled heat sections.
The right control regulates the heat to the rear section and the left control regulates the heat to the
front section. On Innite control grills a signal light is provided above each heat control and
indicates when the heated section is on. An additional light is provided on the end housing of the unit
that indicates the position of the main power switch.
All units are equipped with an easily removed bun pan which can be removed by lifting out of the
open bun drawer. This makes daily cleaning of the pan easy.
It is necessary to remove the bun drawer before attempting to remove the drip tray when access to
the rear of the unit is obstructed. To remove the bun drawer, rst allow the unit to cool, remove bun
pan, then grab the drawer by both sides and pull it out all the way.
Lift the front to unhook the drawer slide from rear drawer roller. Pull the drawer the remainder of the
way out. Use caution not to drop the drawer when reaching the end of the drawer slide travel.
To reinsert the drawer, rst hook the drawer slide over the rst right side roller then push the drawer
in until the second roller drops in, doing one side at a time. Repeat for left side rollers. Reinsert bun
pan. Do not operate the grill without the drip tray in place.
COOKING
The heat controls provide an innite range of settings for a wide variety of food products and
installation conditions. The size, content and shape of the product and the installation of any sanitary
food shields or sneeze guards will determine the proper heat setting. The National Sanitation
Foundation requires that perishable foods be kept at 140°F or above during
serving periods. Do not keep the food product on a low setting for more than two hours. The product
should be kept refrigerated until ready for use. Cooking time will vary depending on the starting
temperature and the quality of the product. For best results when cooking hot dogs use a hot dog
made for grilling.
Operating the bun drawer requires lling the pan with fresh buns and removing the stale buns as
required. The heated bun drawer is not meant to toast the buns and the temperature is not adjustable.
NO WATER IS REQUIRED OR RECOMMENDED.
USE ONLY PLASTIC OR COATED UTENSILS FOR HANDLING THE FOOD PRODUCT.
METAL WILL SCRATCH THE ROLLER COATING AND AFFECT THE ABILITY TO
CLEAN THE ROLLERS.
INTERNAL DRAWER COMPONENTS & DRAWER CAVITY ARE HEATED. ALLOW THE
DRAWER & CAVITY TO COOL DOWN BEFORE SERVICING OR CLEANING. DO
NOT USE STEEL WOOL OR ABRASIVE CLEANERS ON THE ROLLERS.
SCRAPES WILL VOID THE WARRANTY. USE CAUTION WHEN CLEANING
A HOT GRILL TO PREVENT BURNS OR BODILY INJURY.
5
CAUTION
CAUTION

CLEANING
Before cooking for the rst time, wash the rollers with mild soap and water using a soft cloth. Do
not use metal utensils when cooking. Scratches and scrapes will hamper the ability to easily clean
the rollers. Never use steel wool or abrasive cleaners on the rollers. This will damage the nish and
the roller bearings. The rollers clean most easily when hot. Use caution when cleaning to prevent
burns and bodily injury. Clean the rollers with a clean wet cloth. Wipe from the ends to the center to
prevent forcing debris into the roller seals. Do not allow the food product to build up and bake onto
the roller surface. The exterior of the unit should be cleaned using a mild detergent or non-abrasive
cleaner. Clean the entire unit daily to insure long life and satisfactory performance as well as to
maintain an attractive appearance. Do not clean with water jet equipment.
When cleaning the interior bun drawer compartment, remove the bun drawer (see General Operating
Instructions on page 5) and clean with mild detergent and warm water.
MAINTENANCE AND REPAIRS
Contact the factory, a service representative or a local service company for service or required
maintenance. Replacement cord sets must be purchased from Star Manufacturing International, Inc.
6
CAUTION

START-UP
When initially turning on power to the electronically
controlled grill, it will be in the HOLD mode. The
display will ash until the set point temperature is
reached. The grill will beep once when it is up to
temperature. Innite controlled grills have no noti-
cation when operating temperature is reached.
HEATING
The size, content, and shape of the product and the
installation of any sanitary food shields or sneeze
guards will determine the proper heat setting. The
National Sanitation Foundation requires that all
perishable foods be kept at 140°F or above during
serving periods.
The product should be kept refrigerated until ready
to use. Heating times vary depending on the starting
temperature and the qualities of the product. For
best results, use a hot dog made for grilling.
Before cooking for the rst time, wash the rollers
with mild soap and water using a soft cloth. When
the electronic controlled grills are initially turned on,
the displays will ash the HOLD temperature until
the grill reaches that set point.
With the grill preheated to the hold temperature,
load with the desired product and press the HEAT
button. The grill will then go into the heat mode and
the displays will ash until the HEAT temperature is
reached. After the heating cycle, the grill will beep
four times and the food product will be at the serving
temperature.
NOTE: Based on the product being heated, some
experimentation is required to nd the optimal HEAT
temperature and HEAT time to bring the product up
to temperature in an acceptable amount of time.
PROGRAM
The electronic controls provide programmable HEAT
and HOLD settings for a variety of food products and
installation conditions.
To program the electronic roller grill:
1. With the grill on, push and hold the up and down
arrows at the same time, on the side you wish to
program for three seconds until the alarm beeps once
and the display blanks.
2.Tosettheheattemperatureand/orheattime,pushthe
heat button. The last saved heat time will be displayed
and the HEAT LED will ash and HEAT TIME indicator will
be ON. Use the up and down buttons to adjust
to the desired time, then press the HEAT button again.
The HEAT TIME LED indicator will turn off and the HEAT
TEMP LED indicator will now be on. When program-
ming the HEAT temperature is complete, push the HEAT
button one more time to exit the programming mode.
3.To settheholdtemperature,repeat step1 above then
push the HOLD button. The last saved hold temperature
will be displayed and HOLD LED will be ON. Use the
and buttons to adjust to the desired temperature,
then press the HOLD button again to exit programming
mode.
4.To turn the heat off to the front or rear section, press
and hold the for that section for 3 seconds. "OFF"
will be displayed. To turn the section back on, press the
HEAT or HOLD button.
PAT. # 6,782,802 PAT. # 6,707,015
MADE IN
U.S.A.
PAT. # 6,393,971
Seal-Max
DURATEC
PAT. # 6,782,802 PAT. # 6,707,015
7
OPERATING PROCEDURES FOR ELECTRONIC GRILLS

2M-4497-2 6/1312
The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty.
FOR ASSISTANCE
Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or email our Service Department.
In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using.
ALL:
*Pop-Up Toasters
*Butter Dispensers
*Pretzel Merchandisers
(Model 16PD-A Only)
*Pastry Display Cabinets
*Nacho Chip Merchandisers
*Accessories of any kind
*Sneeze Guards
*Pizza Ovens
(Model PO12 Only)
*Heat Lamps
*Pumps-Manual
THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL
This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in which
the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the transportation
company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty status of the unit.
LIMITED EQUIPMENT WARRANTY
All workmanship and material in Star products have a one (1) year limited warranty on parts & labor in the United States and Canada. Such warranty is limited
to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited to the repair
of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below) should be taken
to the closest Star service agency, transportation prepaid.
>Star will not assume any responsibility for loss of revenue.
>On all shipments outside the United States and Canada, see International Warranty.
* The warranty period for the Ultra-Max, Hot Plates, Griddles, Charbroilers is (3) years parts & labor.
* The warranty period for the Star-Max, Charbroilers, Griddles, Hot Plates, Fryers & Finishing Oven is (2) years parts & labor.
*The warranty period for the JetStar six (6) ounce & Super JetStar eight (8) ounce series popcorn machines is two (2) years.
*The warranty period for the Chrome-Max Griddles is ve (5) years on the griddle surface. See detailed warranty provided with unit.
*The warranty period for Teon/Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not apply if damage occurs to
Teon/Dura-Tec coatings from improper cleaning, maintenance, use of metallic utensils, or abrasive cleaners, abrasive pads, product identiers and
point-of-sale attachments, or any other non-food object tha comes in continuous contact with the roller coating. This warranty does not apply to the
“non-stick” properties of such materials.
>This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six (6) months on parts
and ninety (90) days on labor.
>This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or
the Service Center's sub-agency.
>This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and
Operating instructions.
>This warranty is not valid on Conveyor Ovens unless a "start-up/check-out" has been performed by a Factory Authorized Technician.
PARTS WARRANTY
Parts that are sold to repair out of warranty equipment are warranted for ninety (90) days. The part only is warranted, the labor to replace the part is NOT warranted.
SERVICES NOT COVERED BY WARRANTY
PORTABLE EQUIPMENT
Star will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below.
These products should be taken to the Service Agency for repair:
1. Travel time and mileage rendered beyond the 50 mile radius limit
2. Mileage and travel time on portable equipment (see below)
3. Labor to replace such items that can be replaced easily during a daily cleaning
routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc.
4. Installation of equipment
5. Damages due to improper installation
6. Damages from abuse or misuse
7. Operated contrary to the Operating and Installation Instructions
8. Cleaning of equipment
9. Seasoning of griddle plates
10. Voltage conversions
11. Gas conversions
12. Pilot light adjustment
13. Miscellaneous adjustments
14. Thermostat calibration and by-pass adjustment
15. Resetting of circuit breakers or safety controls or reset buttons
16. Replacement of bulbs
17. Replacement of fuses
18. Repair of damage created during transit, delivery, &
installation OR created by acts of God
* The Model 510FD, 510FF Fryer.
* The Model 526TOA Toaster Oven.
* The Model J4R, 4 oz. Popcorn Machine.
*The Model 518CMA & 526CMA Cheese Melter.
* The Model 12MC & 15MC & 18MCP Hot Food Merchandisers.
* The Model 12NCPW & 15NCPW Nacho Chip/Popcorn Warmer.
* All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers.
* All Nacho Cheese Warmers except Model 11WLA Series Nacho Cheese Warmer.
* All Condiment Dispensers except the Model HPD & SPD Series Dispenser.
* All Specialty Food Warmers except Model 130R, 11RW Series, and 11WSA Series.
* All QCS/RCS Series Toasters except Model QCS3 & RCS3 Series.
* All Fast Steamer Models except Direct Connect Series.

STAR MANUFACTURING INTERNATIONAL INC.
SK2095 Rev B 1/13/2011
75SCHB7-240/120V WIRE DIAGRAM
THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.
NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.
PILOT
H1
L1
H2 H2
PILOT
H1
L1
7
7
L2
37
4
7
L2
1
1
2
2
REAR FRONT
F
R
(AS VIEWED FROM REAR OF PANEL)
BUN BOX ELEMENT
4
3
7
B
A
AB
A1/04/05
UPDATE WIRING OF WIRES 3 & 4,
REMOVE WIRE NUTS & CE PLUG RFA
B1/13/2010
UPDATING PILOT LIGHTS AND
INFINITE CONTROLS MCT
DESCRIPTION OF CHANGEDATELTR DR
ALL MODELS EXCEPT
20, 20S, 30D, 30SD - 230V
MODEL:
RG SERIES, INFINITE CONTROLS
THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.
NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.
STAR MANUFACTURING INTERNATIONAL INC.
SK1646 Rev E 1/13/2011
D
P2
H1
L1
H2 H2
P2
H1
L1
7
7
L2
37
4
7
L2
1
1
2
2
REAR FRONT
F
R
B
B
(AS VIEWED FROM REAR OF PANEL)
E E
PILOT
LIGHT

2M-Z9666;RG - Heated & Non-Heated Bun Box
2M-Z9666;RG - Heated & Non-Heated Bun Box
NEUTRAL LINE
FRONT GRILL
REAR GRILL
REAR
FRONT
1
2
3
7
4
F
R
9
F
R
BLACK
WHITE
RIBBON
CABLE
120V AND 240V MODELS
230V MODELS
CONTROL BOARD
POWER BOARD POWER
SWITCH
SENSOR
BUN BOX ELEMENT
6
10
11
12
MODEL:
RG SERIES, HEATED BUN BOX,
ELECTRONIC CONTROLS
THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.
NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.
STAR MANUFACTURING INTERNATIONAL INC.
SK2171 Rev A 5/08/2006
5
8
PILOT LIGHT
MOTOR
NEUTRAL LINE
FRONT GRILL
REAR GRILL
REAR
FRONT
1
2
6
3
7
4
F
R
9
F
R
BLACK
WHITE
120V AND 240V MODELS
230V MODELS
CONTROL BOARD
POWER BOARD POWER
SWITCH
SENSOR
5
8
PILOT LIGHT
MOTOR
MODEL:
RGE SERIES,
ELECTRONIC CONTROLS
THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.
NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.
STAR MANUFACTURING INTERNATIONAL INC.
SK1913 Rev A 5/08/2006

2M-Z9666;RG - Heated & Non-Heated Bun Box
2M-Z9666;RG - Heated & Non-Heated Bun Box
1
3
4
41
42
38
37
9
18
17
20
10
13
MOUNT SPRING BETWEEN
FRAME & ARM HOLES
14
5
35
2
8
12
11
39
56
57
40
44
11
10
15
16
6
7
5
32
22
36
33
34
23
31 30
24
INFINITE CONTROLS
ELECTRONIC CONTROLS
NAMEPLATE
43
40
19
33
31
30
25
REFER TO THE PARTS LIST SPECIFIC TO YOUR MODEL FOR MORE DETAIL INFORMATION. STAR MANUFACTURING INTERNATIONAL INC.
SK2180 Rev. E 7/15/2013
27
26
36 37
60
61
62

2M-Z9666;RG - Heated & Non-Heated Bun Box
2M-Z9666;RG - Heated & Non-Heated Bun Box
48
52
53
54
55
46
50
51
49
58
59
REFER TO THE PARTS LIST SPECIFIC TO YOUR MODEL FOR MORE DETAIL INFORMATION. STAR MANUFACTURING INTERNATIONAL INC.
SK2181 9-15-11
47
45
47

2M-Z9666;RG - Heated & Non-Heated Bun Box
2M-Z9666;RG - Heated & Non-Heated Bun Box
PARTS LIST June 27, 2014, Rev. i
Star Manufacturing International, Inc.
Grill-Max Roller Grills 30HD/BD Series
Fig No Part No Qty Description Application
1 A5-RG30106 1 BODY ASSY ALL
2 A5-Z2185 1 DRIP TRAY ALL
3 A5-Z8409 1 BACK-CHAIN RETAINER SPACER ALL
4 A5-Z8410 1 ANGLE CHAIN RETAINER UPPER ALL
5 A5-Z2169 2 SIDE PANEL ALL
62N-Z2178 11 ELEMENT 120V 30/45 120V
2N-Z2194 ELEMENT 230V 30/45 230V
7 A5-Z6719 1 CHAIN GUIDE ALL
8 2P-Z2242 1 CHAIN ALL
9PS-RG3077 11 ROLLER ASSY CHROME ALL
PS-RG3078 ROLLER ASSY POLY (HI-GRIP) ALL
10 2P-Z8392 3 IDLER SPROCKET ALL
11 2A-Z8017 3 BUSHING, IDLER ALL
12 A5-RG2042 1 ARM ASSY- CHAIN TENSIONER ALL
13 2P-Z8074 1 EXTENSION SPRING ALL
14 2P-Z8317 1 MOTOR SPROCKET ALL 3/8” MOTOR SHAFTS
2P-Z11853 ALL 1/2” MOTOR SHAFTS
15
PS-RG5069
1
KIT MOTOR 120V, w/SPROCKET 120V
PS-RG5070 KIT MOTOR 240V 30/45
(motor, sproket, mount) 230/240V
16 A5-RG2046 1 MOTOR MOUNTING ASSY ALL
17
2E-Z0512
1
CORD SET EUR 10AMP 230V
A5-RG2036 CORD ASSY 120V 120V
A5-RG50111 CORDSET AY, CEE 7-7 30SCHD-230V, 30SCHDE-230/5, 30SCHDCF-230V
18 2K-Y3240 1 CORD BUSHING ALL
19 2E-Y9227 1CORD INLET IEC320 10 AMP 230V
2K-8043 BUSHING HEYCO SB-875-10 120V
20 A5-Z5335 1 BOTTOM COVER PLATE ALL
21 2P-Z1540 2 HOLE PLUG, 5/16” DIA. ALL
22 A5-Z9344 1 MOUNTING BRACKET ALL
23 PS-RG5095 2INFINITE CONTROL 240V 230V / 240V
PS-RG5094 INFINITE CONTROL 120V 120V
24 2K-Z1971 9 SPACERS 30CBDE/CHDE/SCBDE/SCHDE
25
2E-Z13638
1
ELECTRONIC CONTROL, RG 120V 30CBDE/CHDE/SCBDE/SCHDE, manf after 11/2010
A5-Z13640 ELECTRONIC CONTROL, RG 230/240V 230/240V
PS-RG5087 KIT 2E-Z5565 REPLACEMENT, 120V/240V 30CBDE/CHDE/SCBDE/SCHDE, manf before 11/2010
26 2J-Z15323 1THERMISTOR, FRONT, .250 DIA. 30CBDE/CHDE/SCBDE/SCHDE, manf after 11/2010
PS-RG5093 KIT SERVICE, FRONT PROBE REPL 30CBDE/CHDE/SCBDE/SCHDE, manf before 11/2010
27 2J-Z15324 1 THERMISTOR, REAR, .125” DIA 30CBDE/CHDE/SCBDE/SCHDE
30 A5-Z9519 1 CONTROL PANEL 30CBD/SCBD/CHD/SCHD
A5-Z9523 30CBDE/CHDE/SCBDE/SCHDE
31
2M-Z9625
1 CONTROL PANEL LABEL
30SCBDE/SCHDE
2M-Z9626 30SCBD/SCHD
2M-Z9627 30CBDE/CHDE
2M-Z9628 30CBD/CHD

2M-Z9666;RG - Heated & Non-Heated Bun Box
2M-Z9666;RG - Heated & Non-Heated Bun Box
PARTS LIST June 27, 2014, Rev. i
Star Manufacturing International, Inc.
Grill-Max Roller Grills 30HD/BD Series
Fig No Part No Qty Description Application
32 2J-Z2329 3PILOT LIGHT RED 30CBD/SCBD/CHD/SCHD
1 30CBDE, 30CHDE
2J-Z3157 3 PILOT LIGHT YELLOW 30CBD 230V, 30CHDE-230/5, 30CHDCF-230V
33 2E-Z1858 1SWITCH-RED LIGHTED ALL
2E-Z3156 SWITCH-YELLOW LIGHTED 30CBD 230V, 30CHDE-230/5
34 2R-Z1854 2 KNOB W/SET SCREW 30CBD/SCBD/CHD/SCHD
35 A5-Z2509 4 PANEL-INSULATOR ALL
36
2P-Z6455 22 TUBE SEAL, SOLID, WHITE ALL
2I-Z13660 10 INNER SEAL-LIGHT GRAY, BACK
2I-Z13659 12 INNER SEAL-BLACK, FRONT
37 2I-Z2175 22 ORING SEAL ALL
38 2P-Z2174 22 TUBE GUIDE ALL
39 2R-Z5846 4 FOOT-ROLLER GRILLS ALL
40 2K-Z2895 2ANTI SHORT BUSHING ALL
3 30CHDE-230/5
41 A5-Z7650 1 ELEMENT RETAINER - UPPER ALL
42 A5-RG30139 1ELEMENT RETAINER ASSY - LOWER 30CHDE/SCHDE/CBDE/SCBDE/CHDE/SCHDE
A5-Z7656 ELEMENT RETAINER - LOWER 30CBD/SCBD/CHD/SCHD
43 2N-Z15188 1ELEMENT, 80 WATT 230V 30CHDE-230/5
2N-Z2181 ELEMENT BUN BOX 30CHD/CHDE/SCHD/SCHDE
44 2T-Z8346 1 THERMOSTAT 115F-RG W/HB 30CHD/CHDE/SCHD/SCHDE
45 2P-Y9176 2 SNAP-BUTTON ALL
46 A5-RG30110 1 CONTROL PANEL DOOR ASSY ALL
47 2P-Z0315 12 DRAWER ROLLER, BEARING ALL
48 A5-RG30109 1 BUN DRAWER FRAME ASSY ALL
49 2R-Z9393 1 SET 14” DRAWER SLIDES ALL
50 2D-Z5898 1 PAN 2/3 X 4” DEEP ALL
51 A5-Z9538 1 PAN COVER, BUN BOX 30CHD/CHDE/SCHD/SCHDE
52 2P-Z0584 1 TONGS ALL
53 A5-RG30105 1 BUN DRAWER DOOR ASSY ALL
54 2M-Z9397 1LABEL, DRAWER ALL
2M-Z16825 GRAPHIC, RG30 BUN BOX 30SCHDCF-230V
55 2M-Z9398 1LABEL, CONTROL PANEL DOOR ALL
2M-Z16826 GRAPHIC, RG30 CON, COVER 30SCHDCF-230V
56 2C-Z5182 1 SCREW, THUMB-1/4-20 X 1/2 30CHDE/SCHDE/CBDE/SCBDE/CHDE/SCHDE
57 A5-Z13072 1 HD ELEMENT GUARD 30CHDE/SCHDE/CBDE/SCBDE/CHDE/SCHDE
60 2P-Z12340 AR SEAL RETAINER Certain Models
61 2C-Z12341 AR SNAP RING Certain Models
62 2A-Z12339 AR BRASS BUSHING Certain Models
NI 2E-Z8118 1 WIRE SET 30CHD/SCHD
NI 2E-Z8320 1 WIRE SET 30CBD/SCBD
NI 2E-Z8414 1 WIRE SET 30CBDE/SCBDE
NI 2E-Z9386 1 WIRE SET 30CHDE/SCHDE
NI PS-Z3018 -- TUBE ASSEMBLY SLEEVE
NI
2M-Z16827
1
GRAPHIC, RG30, REAR 30SCHDCF-230V
2M-Z16828 GRAPHIC, RG30, SIDE
2M-Z16829 GRAPHIC, RG30, SIDE, SN

2M-Z9666;RG - Heated & Non-Heated Bun Box
2M-Z9666;RG - Heated & Non-Heated Bun Box
Star Manufacturing International, Inc.
PARTS LIST June 27, 2014, Rev. i
Grill-Max Roller Grills 45HD/BD Series
Fig No Part No Qty Description Application
1 A5-RG4562 1 BODY ASSY ALL
2 A5-Z2186 1 DRIP TRAY ALL
3 A5-Z8411 1 BACK-CHAIN RETAINER SPACER ALL
4 A5-Z8412 1 ANGLE CHAIN RETAINER UPPER ALL
5 A5-Z2265 2 SIDE PANEL ALL
62N-Z2178 16 ELEMENT 120V 30/45 ALL
2N-Z2194 ELEMENT 230V 30/45 230V
7 A5-Z6615 1 CHAIN GUIDE - LOWER ALL
8 2P-Z2266 1 CHAIN ALL
9PS-RG3077 16 ROLLER ASSY CHROME ALL
PS-RG3078 ROLLER ASSY POLY (HI-GRIP) ALL
10 2P-Z8392 3 IDLER SPROCKET ASSEMBLY ALL
11 2A-Z8017 3 BUSHING, IDLER ALL
12 A5-RG2042 1 ARM ASSY- CHAIN TENSIONER ALL
13 2P-Z8074 1 EXTENSION SPRING ALL
14 2P-Z8317 1 MOTOR SPROCKET ALL 3/8” MOTOR SHAFTS
2P-Z11853 ALL 1/2” MOTOR SHAFTS
15 PS-RG5069 1 GEAR MOTOR 120V, w/SPROCKET ALL
16 A5-RG2063 1 MOTOR MOUNTING ASSY ALL
17
2E-Z0512
1
CORD SET EUR 10AMP 230V
A5-RG2036 CORD ASSY 120V ALL
A5-RG2041 CORD SET ASSY 120V CSA 120VC
18 2K-Y2968 1 BUSHING - HEYCO 7W-2 120VC
2K-Y3240 1 CORD BUSHING ALL
19 2K-8043 1 BUSHING HEYCO SB-875-10 ALL
20 A5-Z5335 1 BOTTOM COVER PLATE ALL
22 A5-Z9344 1 MOUNTING BRACKET ALL
23
PS-RG5095 2INFINITE CONTROL 240V 230V MANUAL
PS-RG5094 INFINITE CONTROL 120 VOLT ALL MANUAL
PS-RG5087 1 KIT, CONTROL, PBOARD, PROBES 45SCHDE
24 2K-Z1971 9 SPACERS 45SCHDE
25
2E-Z13638
1
ELECTRONIC CONTROL, RG 120V 45SCHDE, manufactured after 11/2010
A5-Z13640 ELECTRONIC CONTROL, RG 230/240V 230/240V
PS-RG5087 KIT 2E-Z5565 REPLACEMENT, 120/240V 45SCHDE, manufactured before 11/2010
26 2J-Z15323 1 THERMISTOR, FRONT, .250 DIA. 45SCHDE, manufactured after 11/2010
26 PS-RG5093 1 KIT SERVICE, FRONT PROBE REPL 45SCHDE, manufactured before 11/2010
27 2J-Z15324 1 THERMISTOR, REAR, .125” DIA 45SCHDE
30 A5-Z9519 1 CONTROL PANEL ALL
31 2M-Z9628 1 LABEL, CONTROL PANEL INFINITE HD / BD
2M-Z9625 LABEL, CONTROL PANEL, ELECTRONIC HDE
32 2J-Z2329 3PILOT LIGHT RED ALL
2J-Z3157 PILOT LIGHT YELLOW 230V
33 2E-Z1858 1SWITCH-RED LIGHTED ALL
2E-Z3156 SWITCH-YELLOW LIGHTED 230V
34 2R-Z1854 2 KNOB W/SET SCREW ALL
35 A5-Z2510 4 PANEL-INSULATOR ALL

2M-Z9666;RG - Heated & Non-Heated Bun Box
2M-Z9666;RG - Heated & Non-Heated Bun Box
PARTS LIST June 27, 2014, Rev. i
Star Manufacturing International, Inc.
Grill-Max Roller Grills 45HD/BD Series
Fig No Part No Qty Description Application
36
2P-Z6455 32 TUBE SEAL, SOLID, WHITE ALL
2I-Z13660 16 INNER SEAL-LIGHT GRAY, BACK
2I-Z13659 16 INNER SEAL-BLACK, FRONT
37 2I-Z2175 32 ORING SEAL ALL
38 2P-Z2174 32 TUBE GUIDE ALL
39 2R-Z5846 4 FOOT-ROLLER GRILLS ALL
40 2K-Z2895 2 ANTI SHORT BUSHING ALL
3 ANTI SHORT BUSHING 230V
41 A5-Z6619 1 ELEMENT RETAINER - UPPER ALL
42 A5-Z6622 1 ELEMENT RETAINER - LOWER ALL
43 2N-Z2181 1 ELEMENT BUN BOX 120V 45CH/SCH
44 2T-Z8346 1 THERMOSTAT 115F-RG W/HB 45CH
45 2P-Y9176 2 SNAP-BUTTON ALL
46 A5-RG30110 1 CONTROL PANEL DOOR ASSY ALL
47 2P-Z0315 12 DRAWER ROLLER W/SCREW ALL
48 A5-RG30109 1 BUN DRAWER FRAME ASSY ALL
49 2R-Z9393 1 SET 14” DRAWER SLIDES ALL
50 2D-Z5898 1 PAN 2/3 X 4” DEEP ALL
51 A5-Z9538 1 PAN COVER, BUN BOX 45CH/SCH
52 2P-Z0584 1 TONGS ALL
53 A5-RG30105 1 BUN DRAWER DOOR ASSY ALL
54
2M-Z9397
1
LABEL, DRAWER ALL
customer
provided LABEL, DRAWER 45SCBDEP, 45SCBDE4P
55
2M-Z9398
1
LABEL, CONTROL PANEL DOOR ALL
customer
provided LABEL, CONTROL PANEL DOOR 45SCBDEP, 45SCBDE4P
56 2C-Z5182 1 SCREW, THUMB-1/4-20 X 1/2 45CH/SCH
57 A5-Z11753 1 HD ELEMENT GUARD 30/45 45CH/SCH
58 2V-Z13052 1 TONG HOLDER CERTAIN MODELS
59 2C-1512 2 SCREW 10X24X3/8 RHP STL CERTAIN MODELS
60
PS-RG30149 KIT KIT -RG HSG RPR/NO ROLLER HOLE REPAIR KIT, 45CBDE4P120,
45SCBDEP-120
61
62
NI 2E-Z8118 1 WIRE SET 45CHD/SCHD
NI 2E-Z8320 1 WIRE SET 45CBD/SCBD
NI PS-Z3018 -- TUBE ASSEMBLY SLEEVE ALL

2M-Z9666;RG - Heated & Non-Heated Bun Box
2M-Z9666;RG - Heated & Non-Heated Bun Box
Star Manufacturing International, Inc.
PARTS LIST June 27, 2014, Rev. i
Grill-Max Roller Grills 50HD/BD Series
Fig No Part No Qty Description Application
1 A5-RG5053 1 BODY ASSY
2 A5-Z2305 1 DRIP TRAY
3 A5-Z8409 1 BACK-CHAIN RETAINER SPACER
4 A5-Z8410 1 ANGLE CHAIN RETAINER UPPER
5 A5-Z2169 2 SIDE PANEL
62N-Z2179 11 ELEMENT 120V 50
2N-Z2193 ELEMENT 230V 230V, 230/5
7 A5-Z6719 1 CHAIN GUIDE
8 2P-Z2242 1 CHAIN
9
PS-RG7562
11
ROLLER ASSY CHROME
PS-RG7563 ROLLER ASSY POLY (HI-GRIP) MFG BEFORE 08/07 ONLY
A5-RG5057 ROLLER ASY HIGRIP (HI-GRIP PLUS)
PS-RG7598 ROLLER ASSY POLY (SMOOTH) 50SCBDESW
10 2P-Z8392 3 IDLER SPROCKET ASSEMBLY
11 2A-Z8017 3 BUSHING, IDLER
12 A5-RG2042 1 ARM ASSY- CHAIN TENSIONER
13 2P-Z8074 1 SPRING
14 2P-Z8317 1 MOTOR SPROCKET ALL 3/8” MOTOR SHAFTS
2P-Z11853 ALL 1/2” MOTOR SHAFTS
15
PS-RG5069
1
GEAR MOTOR w/SPROCKET
PS-RG5070 GEAR MOTOR w/SPROCKET 230V
A5-Z14583 MOTOR, 240V, 50 HZ 50SCBD-230/5
16 A5-RG2046 1 MOTOR MOUNTING ASSY
17
2E-Z0512
1
CORD SET , CONT. EUR 10A 230V
A5-RG2036 CORD ASSY 120V 50CBDE/CHDE/SCHDE/SCBDE-120V
A5-RG2041 CORD SET ASSY 120V 50CBD/SCBD/CHD/SCHD/SCBDE-CSA
18
2E-Y9227
1
INLET IEC320 10 AMP 230V, 230/5
2K-Y3240 CORD BUSHING
2K-Y2968 BUSHING - HEYCO 7W-2 SCBDE-CSA
19 2K-8043 1 BUSHING HEYCO SB-875-10
20 A5-Z5335 1 BOTTOM COVER PLATE
22 A5-Z9344 1 MOUNTING BRACKET
23
PS-RG5095 2INFINITE CONTROL 240V 230V / 240V
PS-RG5094 INFINITE CONTROL 120V 50CHD/CBD/SCHD/SCBD
PS-RG5087 1 ELECTRONIC CONTROL 120V 50CBDE/CHDE/SCBDE/SCHDE
24 2K-Z1971 9 SPACERS 50CBDE/CHDE/SCBDE/SCHDE
25
PS-RG5087
1
KIT 2E-Z5565 REPLACEMENT, 120/240V 50CBDE/CHDE/SCBDE/SCHDE manuf. before 11/2010
2E-Z13638 ELECTRONIC CONTROL, RG 120V 50CBDE/CHDE/SCBDE/SCHDE manuf.after 11/2010
A5-Z13640 ELECTRONIC CONTROL, RG 230/240V 230/240V
26 PS-RG5093 1KIT SERVICE, FRONT PROBE REPL 50CBDE/CHDE/SCBDE/SCHDE manuf.before 11/2010
2J-Z15323 THERMISTOR, FRONT, .250 DIA. 50CBDE/CHDE/SCBDE/SCHDE manuf.after 11/2010
27 2J-Z15324 1 THERMISTOR, REAR, .125” DIA 50CBDE/CHDE/SCBDE/SCHDE
30 A5-Z9392 1CONTROL PANEL 50CHD/CBD/SCHD/SCBD
A5-RG5052 CONTROL PANEL ASSY 50/75 E/C 50CBDE/CHDE/SCBDE/SCHDE
31
2M-Z9613
1
CONTROL PANEL LABEL 50SCBDE/SCHDE
2M-Z9614 CONTROL PANEL LABEL 50CBDE/CHDE
2M-Z9615 CONTROL PANEL LABEL 50SCHD/SCBD
2M-Z9616 CONTROL PANEL LABEL 50CHD/CBD

2M-Z9666;RG - Heated & Non-Heated Bun Box
2M-Z9666;RG - Heated & Non-Heated Bun Box
PARTS LIST June 27, 2014, Rev. i
Star Manufacturing International, Inc.
Grill-Max Roller Grills 50HD/BD Series
Fig No Part No Qty Description Application
32 2J-Z2329 1 PILOT LIGHT RED 50CBDE/CHDE/SCBDE/SCHDE
3 PILOT LIGHT RED 50CHD/CBD/SCHD/SCBD
2J-Z3157 3 PILOT LIGHT 250V AMBER 230V, 230/5
33 2E-Z1858 1 SWITCH-RED LIGHTED
2E-Z3156 1 SW DPST 20A/125V ORG LGHT 230V, 230/5
34 2R-Z1854 2 KNOB W/SET SCREW 50CHD/CBD/SCHD/SCBD
35 A5-Z2509 4 PANEL-INSULATOR
36
2P-Z6455 22 TUBE SEAL, SOLID, WHITE ALL
2I-Z13660 10 INNER SEAL-LIGHT GRAY, BACK
2I-Z13659 12 INNER SEAL-BLACK, FRONT
37 2I-Z2175 22 ORING SEAL
38 2P-Z2174 22 TUBE GUIDE
39 2R-Z5846 4 LEGS
40 2K-Z2895 2ANTI SHORT BUSHING
3 230V, 230/5
41 A5-Z7650 1 ELEMENT RETAINER - UPPER
42 A5-RG30139 1ELEMENT RET + THERM MOUNT 50CBDE/CHDE
A5-Z7656 ELEMENT RETAINER - LOWER 50CHD/CBD/SCHD/SCBD
43 2N-Z2178 1ELEMENT, BUN BOX 120V 50CHD/CHDE/SCHD/SCHDE
2N-Z2194 ELEMENT, BUN BOX 230V 230V
44 2T-Z8346 1 THERMOSTAT 115F-RG W/HB 50CHD/CHDE/SCHD/SCHDE
45 2P-Y9176 2SNAP BUTTONS
4 50SCBDESW120
46 A5-RG5047 1 CONTROL PANEL DOOR ASSY
47 2P-Z0315 12 DRAWER ROLLER W/SCREW
48 A5-RG5048 1 BUN DRAWER FRAME ASSY
49 2R-Z9393 1 SET 14” DRAWER SLIDES
50 2D-Z5899 1 PAN FULL X 4” DEEP
51 A5-Z9539 1 HD PAN COVER 50CHD/CBD/SCHD/SCBD
52 2P-Z0584 1TONGS
3 50SCBDESW120
53 A5-RG5046 1 BUN DRAWER DOOR ASSY
54 2M-Z9395 1 LABEL, DRAWER
customer provided 1 LABEL, DRAWER 50SCBDEP, 50SCBDE4P
55 2M-Z9396 1 LABEL, CONTROL PANEL DOOR
customer provided 1 LABEL, CONTROL PANEL DOOR 50SCBDEP, 50SCBDE4P
56 2C-Z5182 1 SCREW, THUMB-1/4-20 X 1/2 50CHD/CHDE/SCHD/SCHDE
57 A5-Z13072 1 HD ELEMENT GUARD 30/45 50CHD/CHDE/SCHD/SCHDE
58 2V-Z13052 1 TONG HOLDER CERTAIN MODELS
59 2C-1512 2 SCREW 10X24X3/8 RHP STL CERTAIN MODELS
60 2P-Z12340 1 SEAL RETAINER 50SCBD-120V
61 2C-Z12341 1 SNAP RING 1.25 EXTERNAL 50SCBD-120V
62 2A-Z12339 1 BUSHING RG REPAIR 50SCBD-120V
NI 2E-Z8118 1 WIRE SET 50CHD/SCHD
NI 2E-Z8320 1 WIRE SET 50CBD/SCBD
NI 2E-Z8414 1 WIRE SET 50CBDE/SCBDE
NI 2E-Z9386 1 WIRE SET 50CHDE/SCHDE
NI PS-Z3018 -- TUBE ASSEMBLY SLEEVE

2M-Z9666;RG - Heated & Non-Heated Bun Box
2M-Z9666;RG - Heated & Non-Heated Bun Box
Star Manufacturing International, Inc.
PARTS LIST June 27, 2014, Rev. i
Grill-Max Roller Grills 75HD/BD Series
Fig No Part No Qty Description Application
1 A5-RG7580 1 BODY ASSY
2 A5-Z2306 1 DRIP TRAY
3 A5-Z8411 1 BACK-CHAIN RETAINER SPACER
4 A5-Z8412 1 ANGLE CHAIN RETAINER UPPER
5 A5-Z2265 2 SIDE PANEL
62N-Z2193 16 ELEMENT 230V 50/75 240V, CE50
2N-Z2982 ELEMENT 120V 105 W 120V
7 A5-Z6615 1 CHAIN GUIDE
8 2P-Z2266 1 CHAIN
9
PS-RG7562
16
ROLLER ASSY CHROME
PS-RG7563 ROLLER ASSY POLY (HI-GRIP) MFG BEFORE 08/07 ONLY
A5-RG5057 ROLLER ASSY POLY (HI-GRIP PLUS)
PS-RG7598 ROLLER ASSY POLY (SMOOTH) 75SCBDESW
10 2P-Z8392 3 IDLER SPROCKET
11 2A-Z8017 3 BUSHING, IDLER
12 A5-RG2042 1 ARM ASSY- CHAIN TENSIONER
13 2P-Z8074 1 EXTENSION SPRING
14 2P-Z8317 1 MOTOR SPROCKET ALL 3/8” MOTOR SHAFTS
2P-Z11853 ALL 1/2” MOTOR SHAFTS
15
PS-RG5070
1
GEAR MOTOR w/SPROCKET 240V
PS-RG5069 GEAR MOTOR w/SPROCKET 120V
A5-Z14583 MOTOR, 240V, 50 HZ 75SCBDE-CE50
16 A5-RG2046 1 MOTOR MOUNTING ASSY
17
A5-RG2034
1
CORD SER 240V W/TERMINALS 240V
A5-RG2041 CORD ASSY 120V 120V
2E-Y9251 CORD SET CONT EEUR 16AMP 75SCBDE-CE50
18 2K-Y3240 1 CORD BUSHING
19 2K-8043 1 BUSHING HEYCO SB-875-10
20 A5-Z5335 1 BOTTOM COVER PLATE
22 A5-Z9344 1 MOUNTING BRACKET
23 PS-RG5095 2INFINITE CONTROL 240V 230V / 240V
PS-RG5094 INFINITE CONTROL 120V 120V
24 2K-Z1971 9 SPACERS 75CBDE/CHDE/SCBDE/SCHDE
25
PS-RG5087
1
KIT 2E-Z5565 REPLACEMENT, 120/240V 75CBDE/CHDE/SCBDE/SCHDE, manufacture before 11/2010
2E-Z13638 ELECTRONIC CONTROL, RG 120V 75CBDE/CHDE/SCBDE/SCHDE manufactured after 11/2010
A5-Z13640 ELECTRONIC CONTROL, RG 230/240V 75CBDE/CHDE/SCBDE/SCHDE manufactured after 11/2010
26 PS-RG5093 1KIT SERVICE, FRONT PROBE REPL 75CBDE/CHDE/SCBDE/SCHDE, manufacture before 11/2010
2J-Z15323 THERMISTOR, FRONT, .250 DIA. 75CBDE/CHDE/SCBDE/SCHDE manufactured after 11/2010
27 2J-Z15324 1 THERMISTOR, REAR, .125” DIA 75CBDE/CHDE/SCBDE/SCHDE
30 A5-RG5052 1 CONTROL PANEL 75CBDE/CHDE/SCBDE/SCHDE
A5-Z9392 75CBD/CHD/SCBD/SCHD
31
2M-Z9616 1 CONTROL PANEL LABEL 75CHD/CBD
2M-Z9615 1 CONTROL PANEL LABEL 75SCHD/SCBD
2M-Z9614 1 CONTROL PANEL LABEL 75CBDE-120V/CHDE
2M-Z9613 1 CONTROL PANEL LABEL 75CBDE-240V/SCBDE/SCHDE
32
2J-Z2329 1 PILOT LIGHT RED 75CBDE/CHDE/SCBDE/SCHDE
2J-Z2329 3 PILOT LIGHT RED 75CBD/CHD/SCBD/SCHD
2J-Z3157 1 PILOT LT 250V AMBER NEON 75SCBDE-CE50

2M-Z9666;RG - Heated & Non-Heated Bun Box
2M-Z9666;RG - Heated & Non-Heated Bun Box
PARTS LIST June 27, 2014, Rev. i
Star Manufacturing International, Inc.
Grill-Max Roller Grills 75HD/BD Series
Fig No Part No Qty Description Application
33 2E-Z1858 1SWITCH-RED LIGHTED
2E-Z3156 SW DPST 20A/125V ORG LIGHT 75SCBDE-CE50
34 2R-Z1854 2 KNOB W/SET SCREW 75CBD/CHD/SCBD/SCHD
35 A5-Z2510 4 PANEL-INSULATOR
36
2P-Z6455 32 TUBE SEAL, SOLID, WHITE ALL
2I-Z13660 16 INNER SEAL-LIGHT GRAY, BACK
2I-Z13659 16 INNER SEAL-BLACK, FRONT
37 2I-Z2175 32 ORING SEAL
38 2P-Z2174 32 TUBE GUIDE
39 2R-Y5092 4 LEGS 4”, BLACK PLASTIC
40 2K-Z2895 2ANTI SHORT BUSHING
3 240V, 75SCBDE-CE50
41 A5-Z6619 1 ELEMENT RETAINER - UPPER
42 A5-RG4582 1ELEMENT RET + THERM MOUNTS 75CBDE/CHDE/SCBDE/SCHDE
A5-Z6622 ELEMENT RETAINER - LOWER 75CBD/CHD/SCBD/SCHD
43 2N-Z2178 1 ELEMENT, BUN BOX 120V 75CHD/CHDE/SCHD/SCHDE
44 2T-Z8346 1 THERMOSTAT 115F-RG W/HB 75CHD/CHDE/SCHD/SCHDE
45 2P-Y9176 2 SNAP BUTTON
46 A5-RG5047 1 CONTROL PANEL DOOR ASSY
47 2P-Z0315 12 DRAWER ROLLER W/SCREW
48 A5-RG5048 1 BUN DRAWER FRAME ASSY
49 2R-Z9393 1 SET 14” DRAWER SLIDE
50 2D-Z5899 1 PAN FULL X 4” DEEP
51 A5-Z9539 1 HD PAN COVER 50/75 75CHD/CHDE/SCHD/SCHDE
52 2P-Z0584 1TONGS
3 75SCBDESW120
53 A5-RG5046 1 BUN DRAWER DOOR ASSY
54 2M-Z9395 1 LABEL, DRAWEE
55 2M-Z9396 1 LABEL, CONTROL PANEL DOOR
56 2C-Z5182 1 SCREW, THUMB-1/4-20 X 1/2 75CHD/CHDE/SCHD/SCHDE
57 A5-Z13072 1 HD ELEMENT GUARD 30/45 75CHD/CHDE/SCHD/SCHDE
60 2P-Z12340 1 SEAL RETAINER 75SCBD-240V
61 2C-Z12341 1 SNAP RING 1.25 EXTERNAL 75SCBD-240V
62 2A-Z12339 1 BUSHING RG REPAIR 75SCBD-240V
NI 2E-Z8414 1 WIRE SET 75CBDE/SCBDE
NI 2E-Z9386 1 WIRE SET 75CHDE/SCHDE
NI 2E-Z8320 1 WIRE SET 75CBD/SCBD
NI 2E-Z8118 1 WIRE SET 75CHD/SCHD
NI PS-Z3018 -- TUBE ASSEMBLY SLEEVE
NI 2E-Y9253 1 INLET IEC 320 16 AMP 75SCBDE-CE50
This manual suits for next models
28
Table of contents
Other Star Grill manuals

Star
Star GRILL EXPRESS GX10IG User manual

Star
Star SONIC GR131-L User manual

Star
Star PRO-MAX GR28SPTI User manual

Star
Star GR14C User manual

Star
Star GR14SPTA User manual

Star
Star STAR-MAX OCB30 User manual

Star
Star GRILL-MAX 30SCE User manual

Star
Star 6015CBB-LP User manual

Star
Star GR14SPTA User manual

Star
Star 30C Owner's manual

Star
Star Pro-Max CG10 Owner's manual

Star
Star Pro-Max GR28IT User manual

Star
Star Lang LRB-24 User manual

Star
Star GRILL EXPRESS GX10IG User manual

Star
Star 20C User manual

Star
Star CG130A User manual

Star
Star Grill-Max 30SCHDM-120V Owner's manual

Star
Star Pro-Max PSC14D User manual

Star
Star GRILL-MAX 30SCE User manual

Star
Star 75SCRHB7 User manual