Starcom Systems Helios Assembly instructions
Helios User’s Manual Guide
Starcom GPS Global Solutions
Helios User’s Manual Guide
Version 2.0
Helios Users Guide
www.starcomgpsglobal.com 2
October 2015
COPYRIGHT © STARCOM GPS GLOBAL SOLUTIONS, ALL RIGHTS
RESERVED.
Distribution of substantively modified versions of this document is prohibited
without the explicit permission of the copyright holder.
Distribution of this work, or of a derivative thereof, in any standard (paper)
book form for commercial purposes is prohibited unless prior permission is
obtained from the copyright holder.
DOCUMENTATION IS PROVIDED «AS IS» AND ALL EXPRESS OR IMPLIED
CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE
EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.
Helios Users Guide
www.starcomgpsglobal.com 3
Contents
1 Introduction 6
2 Package Contents 7
Helios evaluation kit 8
Simulator description 9
3 Product Description 12
Unit board main components 13
Helios models 14
Technical specifications 16
Industry approvals and certifications 17
4 Configuration 18
Downloading the Software 18
Installing the Software 19
Installing the Update 24
Inserting the SIM card 26
Attaching the battery (optional) 29
Connecting the unit to the computer 33
Configuring the unit 35
General settings 40
Network settings 41
Transmission Rates settings 43
Inputs settings 45
Outputs settings 47
Logic settings 49
Hardware settings 51
Analog input configuration on Helios TT and Basic 53
Fuel algorithm v2 54
Jamming detection 57
Driver IDs settings 58
Saving the configuration 59
Configuring a new unit with the saved configuration 59
Configuring multiple units using the wizard 59
Helios Hybrid configuration 62
Helios Users Guide
www.starcomgpsglobal.com 4
5 Testing 63
TCP test 63
GPS test 65
Unit Status 66
6 Installation 67
Wiring considerations and safety guidelines 67
Tools required for installation 69
Positioning the unit in the vehicle 70
Donning the Helios TT waterproof casing 71
Helios TT pin out 76
Helios Basic 10-pin pin out 80
Helios Advanced 24-pin pin out 83
Helios Hybrid connection 87
7 Monitoring 88
Home 89
Resources 90
Units 91
Groups 94
Drivers 96
Users 97
Perimeters 100
Plans 103
Monitor 110
Map 112
Reports 119
Scheduled reports 122
Profile 124
Help 126
Wiring 126
Helios Users Guide
www.starcomgpsglobal.com 5
Appendix A –Unit Communication in Starcom Systems 128
Appendix B –Configuring Mileage 130
Appendix C –Central Locking System Configuration 133
Appendix D –Immobilizer and Gradual Stop 137
Appendix E –Connecting a Siren 138
Appendix F –Fuel Management 139
Appendix G –CAN Bus Connection 145
Appendix H –Using Keypad with RF Relay 152
Appendix I –Cellular Phone Commands 155
Appendix J –Contacts 156
Helios Users Guide
www.starcomgpsglobal.com 6
1 Introduction
Helios is a real-time vehicle tracking device designed for fleet management and
security applications.
It offers over 200 unique features, such as fuel consumption monitoring, extra
digital inputs for connection of various external sensors, offline communication
option, built-in accelerometer, OTA (over-the-air) programming, etc.
The system allows configuring a wide variety of events for fleet manager and
the communication channels which define where and how the notifications are
transmitted.
Helios Users Guide
www.starcomgpsglobal.com 9
Simulator description
The Simulator was developed for Helios testing and presentation purposes. It
simulates the vehicle behaviour and alarm triggers, the LEDs light up to
indicate the unit input/output response. It can serve as an efficient tool in
training your employees and evaluating their performance. The Simulator is an
effective, professional sales tool which can be used to demonstrate the system
advantages and present them to your customers.
Front panel
1. Power LED
2. Dallas Key socket
3. Analog input knobs
4. Output simulator LEDs
5. Input simulator buttons and LEDs
Helios Users Guide
www.starcomgpsglobal.com 10
Left panel
1. DLS/KYPD –Dallas Key / Keypad switch
2. Mini USB connector
3. ON/OFF –Power switch
4. Power connector
Helios Users Guide
www.starcomgpsglobal.com 11
Right panel
1. 24-pin connector
Back panel
1. Keypad connector
NOTE: When connecting a keypad, make sure to place the DLS/KYPD switch
on the left panel in the KYPD position.
Helios Users Guide
www.starcomgpsglobal.com 12
3 Product Descriptions
1. Bottom cover –plastic cover which snaps onto the top cover and is secured
with a screw.
2. Battery –backup battery (optional).
3. Divider –plastic divider which snaps onto the top cover. The backup battery
is placed on top of this divider.
4. Unit board –printed circuit board with electronic components which is
secured to the top cover.
5. Top cover –plastic cover which covers the GPS antenna. This side should be
facing upwards when the unit is installed in the vehicle.
Helios Users Guide
www.starcomgpsglobal.com 14
Helios Models
There are four Helios models:
Helios
TT
Helios
Advanced
Helios
Advanced
U Blox
Helios
Hybrid module
GPS
+
+
+
+
GSM
+
+
(optional 3G,
HSDPA and
CDMA)
+
(optional 3G,
HSDPA and
CDMA)
+
(optional 3G,
HSDPA and
CDMA)
Satellite
Connectivity
-
-
-
+
Connector
10 pin Molex
24 pins Molex
24 pins Molex
For Helios
Advanced +
10 pins Molex
Accelerometer
+
+
+
+
CAN Bus
-
+
+
+
Usage
Track and trace
Full fleet and
security
features
Can be used as
standalone
alarm system
Full fleet and
security
features
Can be used as
standalone
alarm system
Full fleet and
security
features
Can be used as
standalone
alarm system
Advantages
Low cost
Waterproof IP65
(optional)
Allows a tow
detection with
very low power
consumption
Additional
inputs/outputs
Built-in
accident and
harsh braking
detection
Additional
inputs/outputs
Built-in
accident and
harsh braking
detection.
External
Antenna
fixtures
Constant
communication
around the
world, even
without cellular
coverage
Additional
inputs/outputs
Built-in
accident and
harsh braking
detection
I/O
2 digital inputs
(one digital
input can be
used as an
analog input)
1 digital output
1 COM port
8 digital inputs
3 analog inputs
4 digital outputs
1 pulse counter
RS232
Can Bus
*Hands Free
input
iButton /
Keypad / RF
Keypad /
Remote Control
input
8 digital inputs
3 analog inputs
4 digital outputs
1 pulse counter
RS232
Can Bus
*Hands Free
input
iButton /
Keypad / RF
Keypad /
Remote Control
input
8 digital inputs
3 analog inputs
4 digital outputs
1 pulse counter
RS232
dedicated to
Hybrid module
Can Bus
*Hands Free
input
iButton /
Keypad / RF
Keypad /
Remote Control
input
SIM card
Micro-SIM
Mini-SIM
Mini-SIM
Mini-SIM
Helios Users Guide
www.starcomgpsglobal.com 15
* When Hands Free Kit is used, the unit is left with 5 digital inputs and 2
analog inputs only.
For connector pin out information, see Helios TT pin and Helios Advanced+ 24-
pin pin out (Chapter 6 –Installation).
Helios Users Guide
www.starcomgpsglobal.com 16
Technical specifications
CPU
Type
Memory
NXP ARM Cortex-M3
Static RAM: 128kb
ROM: 34kb
Flash: 2048kb
Power
Voltage Range
Consumption
8 V –28 V (supported in same unit)
3 mA in low power mode
up to 120 mA in working mode
can reach up to 300 mA if battery is charged
Backup Battery
(optional)
Type
Power
Lithium-ion Polymer
3.75 V, Helios Advanced+: 950 mAh / Helios
TT: 550 mAh
GPRS –Cellular
Modem
Satellite Modem
(external device)
Data Messages
GSM
Antenna Type
Network Channels
Connection
SMS
GPRS
Quad Band (850, 900, 1800, 1900).
Built in (concealed)
GSM, CDMA, HSDPA, SMS
3G (optional)
RS232
Encrypted Protocol
TCP/IP
Location
Type
Time to First Fix
(TTFF)
Positioning Accuracy
Antenna Type
GPS / GLONASS (optional)
2 sec (hot start)
10 m CEP (50%)
Velocity: 0.2 m/s (50%)
Built in (concealed)
COM Port
Type
Speed
RS232
115,200 bps (default)
I/Os
(check per model)
Digital Inputs
Digital Outputs
Analog Inputs
Pulses Counter
CAN Bus
Helios Advanced+: Max 8 / Helios TT: Max 2
Helios Advanced+: Max 4 / Helios TT: Max 1
Helios Advanced+: Max 3 / Helios TT: Max 1
Max 1 (Helios Advanced+ only)
Included (Helios Advanced+ / Basic)
Accelerometer
(check per model)
Type
Purpose
3-Axis, 20 mg accuracy, up to 8 g
Identify and report events of impact, accident
Alarm System
Size
Weight
Helios Advanced+:
21H x 60W x 107L (mm)
Helios TT:
21H x 60W x 57L (mm)
Helios Advanced+:
150 (grams) 5.29 (Oz)
Helios TT:
120 (grams) 4.23 (Oz)
Environmental
Operating Temp
Storage Temp
Humidity
-40°C (-40°F) to 60°C (140°F)
-40°C (-40°F) to 85°C (185°F)
Max 50%
Helios Users Guide
www.starcomgpsglobal.com 19
Installing the Software
Locate the folder where you saved the installer setup file. Double-click the
InstallSetup.exe. The Open File dialog box appears.
Click Run. A Windows Security dialog box appears. Click Yes. The Welcome to
the Starcom Installer Application Setup Wizard window appears.
Helios Users Guide
www.starcomgpsglobal.com 20
Click Next. The Select Destination Location window appears.
Click Next. The Select Components window appears.
Other manuals for Helios
1
Table of contents
Other Starcom Systems GPS manuals
