Starfish Tumble Forms User manual

Tumble Forms Starfish Bath Chair
Instruction Manual

2
Table of Contents
About the Tumble Forms Starfish Bath Chair
Page 3
Item Numbers and Product Specifications
Page 4-5
Setup of the Tumble Forms Starfish Bath Chair Product
Pages 6-8
Clinical Setup of the Tumble Forms Starfish Bath Chair
Page 9-13
Safety Instructions
Page 14
Care Instructions
Page 15
Product Inspections
Page 16
Contact Information
Page 17

3
About the Tumble Forms Starfish Bath Chair
The Tumble Forms Starfish Bath Chair is intended for use in the
shower or bath. Usage in the shower should be accompanied with
the Tumble Forms Starfish Shower Trolley. It is recommended for
children with disabilities from age 1-18. The bath chair is designed to
reach new levels of functionality and ease of adjustability. The chair
has angle adjustable legs with articulating back and leg support, and
offers a wide range of height/angle positions to make bath time easy
and more fun. Only one hand is needed to release the leg and seat
locks located on both sides of the chair. The padded support bars
give added protection and positioning comfort.
The frame of the Tumble Forms Starfish Bath Chair is made of
aluminum, making it easy to lift and carry. For convenient storage
and transport, it folds flat and includes nonskid foam pads for secure
tub placement and protection. The seat is covered with extra soft,
breathable mesh material that is removable for laundering and comes
in your choice of 4 colors: Ocean Blue, Lobster Red, Puffer Fish
Purple and Jellyfish Pink. It is also available in 4 sizes to
accommodate children in various stages of development. Maximum
weight capacity: 159 lbs.

4
Item Numbers and Product Specifications
ITEM # DESCRIPTION
92152411 Starfish Bath Chair, Size 1, No Cover
92152412 Starfish Bath Chair, Size 2, No Cover
92152413 Starfish Bath Chair, Size 3, No Cover
92152414 Starfish Bath Chair, Size 4, No Cover
921525 Shower Trolley for Bath Chair, One Size
ITEM # DESCRIPTION
9215240102 Bath Chair Cover – Size 1 – Ocean Blue
9215240104 Bath Chair Cover – Size 1 – Lobster Red
9215240105 Bath Chair Cover – Size 1 – Puffer Fish Purple
9215240106 Bath Chair Cover – Size 1 – Jellyfish Pink
9215240202 Bath Chair Cover – Size 2 – Ocean Blue
9215240204 Bath Chair Cover – Size 2 – Lobster Red
9215240205 Bath Chair Cover – Size 2 – Puffer Fish Purple
9215240206 Bath Chair Cover – Size 2 – Jellyfish Pink
9215240302 Bath Chair Cover – Size 3 – Ocean Blue
9215240304 Bath Chair Cover – Size 3 – Lobster Red
9215240305 Bath Chair Cover – Size 3 – Puffer Fish Purple
9215240306 Bath Chair Cover – Size 3 – Jellyfish Pink
9215240402 Bath Chair Cover – Size 4 – Ocean Blue
9215240404 Bath Chair Cover – Size 4 – Lobster Red
9215240405 Bath Chair Cover – Size 4 – Puffer Fish Purple
9215240406 Bath Chair Cover – Size 4 – Jellyfish Pink
9215241102 Chest Belt Strap – Ocean Blue
9215241104 Chest Belt Strap – Lobster Red
9215241105 Chest Belt Strap – Puffer Fish Purple
9215241106 Chest Belt Strap – Jellyfish Pink
9215242102 Abduction Strap – Size 1 & 2 – Ocean Blue
9215242104 Abduction Strap – Size 1 & 2 – Lobster Red
9215242105 Abduction Strap – Size 1 & 2 – Puffer Fish Purple
9215242106 Abduction Strap – Size 1 & 2 – Jellyfish Pink
921527 Abduction Strap – Size 3 & 4 – Ocean Blue
921529 Abduction Strap – Size 3 & 4 – Lobster Red
921530 Abduction Strap – Size 3 & 4 – Puffer Fish Purple
921531 Abduction Strap – Size 3 & 4 – Jellyfish Pink
9215243102 Head Laterals – Ocean Blue
9215243104 Head Laterals – Lobster Red
9215243105 Head Laterals – Puffer Fish Purple
9215243106 Head Laterals – Jellyfish Pink
9215244102 Hip Belt – Ocean Blue
9215244104 Hip Belt – Lobster Red
9215244105 Hip Belt – Puffer Fish Purple
9215244106 Hip Belt – Jellyfish Pink

5
Item Specifications:
STARFISH BATH CHAIR USER WEIGHT & HEIGHT
SIZE MAX WEIGHT (Kg) MIN. HEIGHT (mm) MAX HEIGHT (mm)
1 159 lbs (72) Up to 31.5” (800) 39” (1000)
2 159 lbs (72) 35” (900) 47” (1200)
3 159 lbs (72) 43” (1100) 55” (1400)
4 159 lbs (72) 51” (1300) 65” (1650)
STARFISH BATH CHAIR SPECIFICATIONS
SIZE (mm) 1 2 3 4
HEAD SUPPORT 6” (150) 6” (150) 8.5” (215) 8.5” (215)
BACK SUPPORT HEIGHT 14” (350) 16” (400) 18” (460) 22” (550)
SEAT DEPTH 9” (225) 11” (275) 13” (335) 16” (400)
SEAT WIDTH 16” (400) 16” (400) 16” (400) 16” (400)
LEG SUPPORT 10” (260) 10” (260) 13” (340) 13” (340)
OVERALL LENGTH 39” (975) 42” (1,050) 52.5” (1,312.5) 59.5” (1,487.5)
SEAT HEIGHT 2-17” (50-425) 2-17” (50-425) 2-17” (50-425) 2-17” (50-425)

Setup of the Tumble Forms Starfish Bath Chair Product
***IMPORTANT***
Carefully unpack your new product ensuring that you have received
the following:
1) Bath Chair Frame
2) Bath Chair Cover
3) Hip Belt
4) Chest Belt
If not, please contact Patterson Medical immediately.
Attaching the Cover
1) To attach the cover to the bath chair, raise the calf support to
the most upright position.
2) Slip the cover over the backrest first; then slip the bottom of the
cover over the calf support.
3) Once secure, loop the straps through the frame securing the
fabric to the base.
6

Attaching the Hip Belt
When user is in the seated position, wrap the hip belt around the
chair and the user. Make sure that the belt goes thru the blue
plastic pieces attached to the rear support bar to ensure that the
belt will stay in place. Secure with the hook and loop on the strap
itself.
Attaching the Chest Belt
When user is in the seated position, wrap the chest belt around
the chair and the chest of the user and secure with the hook and
loop on the strap itself.
Attaching the Abduction Strap
Loop the abduction strap around the tubular frame and secure
underneath with the hook and loop on the strap itself.
Attaching the Head Laterals
Loop the head laterals around the tubular frame head rest and
secure behind with the hook and loop on the strap itself.
7

Attaching the Bath Chair to the Shower Trolley
1) Alter the length of the frame by turning the knobs on the bottom
of the trolley and adjusting the frame to correspond with the
adjusted positions of the bath chair. Make sure knobs are
tightened after adjustment is complete to ensure user’s safety.
2) Position the bath chair legs into the grooves and secure in
place with the hook and loop straps provided.
!!Safety note: When the shower trolley is stationary ensure
that all 4 wheel casters are locked and facing away from the
trolley base.
8

Clinical Setup of the Tumble Forms Starfish Bath Chair
Setup and use of this product should be done by someone who has
been trained and familiar with the overall use of the bath chair
product.
This person can also train parents and care giving professionals on
how to adjust the product – as well care for it and make the
necessary repairs/maintenance checks on the product.
Warning:
Do not at any time put your finger underneath the black flaps on
the frame of the bath chair. If this happens – pinching can occur
and cause injury.
9

Height Adjustment
The Tumble Forms Starfish Bath Chair can be adjusted in height to
allow for a range of positions from flat in the bathtub to a raised
position, requiring less bending by the caregiver. The height is
adjusted by pushing the bottom blue levers on the sides of the bath
chair. The chair is specially made for easy adjusting as it can be
done with just one hand on either side of the chair.
!!Safety note: Do not adjust both legs at the same time. Do one
leg then the other. Never adjust the height while child is in the
bath chair.
10

Back Recline Adjustment
The back recline adjustment of the Tumble Forms Starfish Bath Chair
allows for 4 different positions. The back recline is made by pushing
the top blue lever on either side of the chair – the adjustment is made
when the seatback clicks into position.
!!Safety note: Before using the Back Recline Adjustment,
always check with your physician/therapist to ensure that these
positions will not cause obstruction of the user’s airways.
11

Rear Chair Leg/Tilt Adjustment
The rear leg on the Tumble Forms Starfish Bath Chair adjusts past 90
degrees for a more significant tilt. The rear chair leg adjustment is
made by pushing the bottom blue lever on either side of the back of
the chair – the adjustment is made when the back leg clicks into
position.
!!Safety note: Any time the rear leg is adjusted, pay extreme
attention and caution to the child to ensure the chair does not
tip back, which may cause injury.
12

Calf Support Adjustment
The calf support adjustment of the Tumble Forms Starfish Bath Chair
allows for 4 different positions. The calf support adjustment is made
by pushing the top blue lever on either side of the front of the chair –
the adjustment is made when the calf support clicks into position.
Chest Belt Adjustment
To adjust the chest belt, position the foam pads under the user’s
armpits. Secure the strap with the hook and loop pieces at the end of
the straps.
Abduction Strap Adjustment
After the abduction strap has been attached to the bath chair, the
user’s legs are positioned and secured by the smaller hook and loop
straps.
13

14
Safety Instructions
1) Read all instructions completely before use.
2) Do not leave item unattended while being used.
3) Only use Starfish components and accessories with the bath
chair products. Failure to do so will invalidate the warranty of
the product.
4)
5)
Before putting the user into the product, please ensure that all
position adjustments are made and secure. This is for the
safety of the user.
6)
The only adjustment that should be made during use is the
back recline adjustment. Hold the back portion of the seat by
the handles at the top of frame while reclining.
7)
The max weight limit for all bath chair items is 159 lbs. Do not
exceed weight limit at any time.
8)
When the shower trolley is stationary ensure that all 4 wheel
casters are locked and facing away from the trolley base.
9)
While the user is in the equipment, refrain from moving over
uneven surfaces. Mobility is an important feature of this item;
however care should be taken while transporting the user from
one room to another.
10)
While transporting the user in the product, do so by using the
handles at the top of the backrest.
As a safety precaution never leave the product on a sloping
surface, and always remember to lock the casters anytime the
product is not being moved.

15
Care Instructions
1) Clean your Starfish Bath Chair product on a regular basis.
2) Do not use harsh/abrasive cleaners on the bath chair frame –
as this may scratch or ruin the surface of the bath chair. Use
soap and water or antibacterial spray to clean – and for deep
cleaning use a low pressure steam cleaner. Do not use
solvents to clean the plastic or metal components as this may
damage them and make future use a safety hazard.
3) The covers can be removed and machine washed at no more
than 140 degrees Fahrenheit (60 degrees Celsius). The
accessories should be cleaned by hand while still on the chair.
To clean, use warm water and a non-abrasive cleaner. It is
recommended that you do not use any type of medication in the
bathwater during the bathing process as this may result in the
breakdown of the glue that is used to hold the molding to the
stainless steel legs.
4) After cleaning, make sure that the bath chair is dry before next
use.

16
Product Inspection
To ensure the safe use of the Starfish Bath Chair product, we
recommend daily product inspection, consisting of:
1) Making sure all adjustment levers are in place and secure.
2) Checking the hook and loop portions on the straps and covers
for signs of wear. Additional covers can be ordered through
Patterson Medical if needed.
3) Making sure all 4 casters of the bath trolley are moving freely
and locking securely.
To further ensure the continued safe use of the product, a more
thorough yearly inspection of the product should be completed.
Keeping a written record of all inspections is recommended.
If the product is not used in accordance to this manual and for the
intended purposes of the product, the warranties will be void.