StarTech.com USB32VGAV User manual

DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 02/05/2015
For the most up-to-date information, please visit: www.startech.com
Quick Install Guide
Packaging Contents
• 1x USB 3.0 to VGA adapter
• 1x Quick install guide
System Requirements
• Computer system with:
• VGA-enabled display device (e.g. monitor, projector, television)
with cabling
USB32VGAV
USB 3.0 to VGA adapter with onboard drivers
*actual product may vary from photos
• Microsoft Windows 8 / 8.1 (32/64 bit), 7 (32/64 bit), Vista
(32/64 bit)
• *Operating system requirements are subject to change
without notice. To learn about the latest compatible
operating systems, please visit StarTech.com
• Core 2.4GHz or higher processor (i5 recommended)
• 4GB of RAM
Product Overview
Installation
Note: Your system will require a restart as part of the installation
process. It is recommended you save and close any opened
documents before you begin installation.
1. Using the required cabling (not included) connect your VGA-
enabled display device to the VGA video display port on the USB
video adapter.
2. Connect the USB 3.0 host interface port on the USB video adapter
to an available USB port on your computer system.
3. Once the USB video adapter has been connected to your
computer, your system will recognize the adapter and
automatically begin installation.
4. The setup wizard will appear once your system is ready. Please
follow the on screen prompts to continue installation.
For complete operation instructions please download the full
instruction manual at StarTech.com/Support
USB 3.0 interface port
VGA video port

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the
equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be
returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages
arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
5. You will be prompted to click nish once the setup wizard has
completed. You will also be prompted to restart your computer
to complete the installation. Please click Finish followed by Yes on
each respective window.
Once your computer system has restarted the USB video adapter
will be ready to use.