StarTech.com ARMSLMBARDUO User manual

Manual Revision: 02/19/2020
User Manual
For the latest information and specications visit
www.startech.com/ARMSLMBARDUO
Dual-Monitor Arm | Synced Height Adjustment
SKU#: ARMSLMBARDUO
Actual product may vary from photos

1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and
other protected names and/or symbols of third-party companies not related in
any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service
by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.

2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Warning Statements
• Makesurethatyouassemblethisproductaccordingtotheinstructions.
• Donotexceedtheweightcapacityofthisproduct.Overloadingthis
productmightresultininjuryorpropertydamage.Thisproductcan
supportthefollowingweight:17.6lb.(2x8kg)perMonitorMount.
• Thisproductisintendedforindooruseonlyandshouldnotbeused
outdoors.
Varningsmeddelanden
• Setillattdumonterarproduktenienlighetmedinstruktionerna.
• Överskridinteproduktensviktkapacitet.Överbelastningavprodukten
kanorsakaskadapåpersonelleregendom.Dennaproduktharstödför
följandevikter:2x8kg.
• Produktenärendastavseddföranvändninginomhusochskainte
användasutomhus.
Avertissements
• Assemblezceproduitconformémentauxinstructions.
• Nedépassezpaslacapacitépondéraleduproduit.Unesurchargedu
produitpeutentraînerdesblessuresoudesdommagesmatériels.Ce
produitpeutsupporter2x8kg.
• Ceproduitestuniquementdestinéàuneutilisationenintérieuretne
doitpasêtreutiliséàl’extérieur.
Warnhinweise
• BeachtenSiebeiderMontagediesesProduktsdie
Montageanweisungen.
• ÜberschreitenSienichtdieTragkraftdiesesProdukts.EinÜberladen
diesesProduktskannzuVerletzungenoderzurBeschädigungdes
Produktsführen.DiesesProduktistfürfolgendesGewichtgeeignet:2
x8kg.
• DiesesProduktistnurzumGebrauchinInnenräumenvorgesehenund
solltenichtimFreienverwendetwerden.
Dichiarazioni di avvertenza
• AssicurarsidiAssemblareilprodottosecondoleistruzioni.
• Nonsuperarelacapacitàdicaricodelprodotto.Ilsovraccaricodel
prodottopotrebbecausaredanniolesioni.Ilprodottoèingradodi
supportareiseguentipesi:2x8kg.

3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
• Ilprodottoèdestinatoall’usoinambientiinterni.Senesconsiglia
l’impiegoinambientiesterni.
Mensagens de aviso
• Certique-sedequemontaesteprodutodeacordocomasinstruções.
• Nãoexcedaacapacidadedepesodesteproduto.Sobrecarregareste
produtopoderesultaremferimentosoudanosdepropriedade.Este
produtopodesuportaroseguintepeso:2x8kg.
• Esteprodutodestina-seapenasaumautilizaçãonointeriorenãodeve
serutilizadonoexterior.
Advertencias de uso
• Asegúresedeensamblaresteproductosegúnlasinstrucciones.
• Asegúresedenoexcederlacapacidaddepesodeesteproducto.La
sobrecargadeesteproductopuedecausarlesionespersonalesodaños
enlapropiedad.Esteproductotienecapicidadparaelsiguientepeso:
2x8kg.
• Elusodeesteproductoessoloparainterioresynodebeutilizarseen
exteriores.
Waarschuwingen
• Zorgdatuditproductvolgensdeinstructiesinelkaarzet.
• Overschrijddemaximalecapaciteitvanditproductniet.Overbelasting
vanditproductkanletselofmateriëleschadeveroorzaken.Ditproduct
ondersteunthetvolgendegewicht:2x8kg.
• Ditproductisalleenbedoeldvoorbinnengebruikenmagnietbuiten
wordengebruikt.
注意
• 必ず取扱説明書に従って本製品の組み立てを行って下さい。
• 本製品で定められた最大積載重量を超えないようにして下さい。最大積載重量をオーバーした
場合、怪我をする恐れや器物破損の恐れがあります。 本製品は、モニター1台あたり2xx8kgまで
支持できます。
• 本製品は、室内での使用を想定しています。戸外では使用しないで下さい。

4
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Safety Statements
Safety Measures
• Wiringterminationsshouldnotbemadewiththeproductand/or
electriclinesunderpower.
• Cables(includingpowerandchargingcables)shouldbeplacedand
routedtoavoidcreatingelectric,trippingorsafetyhazards.
Mesures de sécurité
• Lesterminaisonsdecâblâgenedoiventpasêtree󱐯ectuéeslorsquele
produitet/oulescâblesélectriquessontsoustension.
• Lescâbles(ycomprislescâblesd’alimentationetdechargement)
doiventêtreplacésetacheminésdefaçonàévitertoutrisque
électrique,dechuteoudesécurité
安全対策
• • 電源が入っている状態の製品または電線の終端処理を行わないでく
ださい。
• • ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引
き回しを行い、電気障害やつまづきの危険性など、安全上のリスクを回避す
るようにしてください。
Misure di sicurezza
• Iterminialideilielettricinondevonoessererealizzateconilprodotto
e/olelineeelettrichesottotensione.
• Icavi(inclusiicavidialimentazioneediricarica)devonoessere
posizionatiestesiinmododaevitarepericolidiinciampo,rischidi
scosseelettricheopericoliperlasicurezza.
Säkerhetsåtgärder
• Monteringavkabelavslutningarfårintegörasnärproduktenoch/eller
elledningarnaärströmförda.
• Kablar(inklusiveelkablarochladdningskablar)skadrasochplaceraspå
såsättattriskförsnubblingsolyckorochandraolyckorkanundvikas.

5
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Table of Contents
Warning Statements.......................................................................................... 2
Safety Statements.............................................................................................. 4
Product Diagram ................................................................................................ 6
Front View.................................................................................................................................................... 6
Product Dimensions................................................................................................................................. 7
Product Rotation ....................................................................................................................................... 8
Product Information.......................................................................................... 9
Package Contents ..................................................................................................................................... 9
Technical Specications.......................................................................................................................... 13
Requirements ............................................................................................................................................. 15
Assembling the Monitor Mount Using the C-Clamp .............................. 16
Using the Grommet Mount............................................................................. 31
Mounting the Monitors.................................................................................... 44
Adjusting the Spring Arm Tension................................................................ 49
Adjusting the Rotation..................................................................................... 50
Making Micro-Adjustments ............................................................................ 51
Routing the Cables ............................................................................................ 52

6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram
Front View
1VESA Mount x 2 5Grommet Clamp
2Upper Arm 6Grab Handle
3Lower Arm 7Crossbar
4C-Clamp
1
2
4
5
6
7
3

7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Dimensions
Actual product may vary from image

8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Rotation

9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Information
Package Contents
Base
Qty: 1
Lower Arm
Qty: 1
Upper Arm
Qty: 1
Crossbar
Qty: 1

10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
VESA Mount
Qty: 2
Grab Handle
Qty: 1
Grommet Plate
Qty: 1
Base Plate
Qty: 1
Adhesive Foam Pad
Qty: 1
Base Cable Management Clip
Qty: 1

11
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Countersunk Hex Screw
Qty: 4
Flat Head Hex Screw
Qty: 2
3 mm Hex Key
Qty: 1
4 mm Hex Key
Qty: 1
6 mm Hex Key
Qty: 1
Washer
Qty: 8

12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
M4 x 12 mm Screws
Qty: 8
M5 x 12 mm Screws
Qty: 8
Upper C-Clamp
Qty: 1
Lower C-Clamp
Qty: 1
Button Head Hex Screws
Qty: 4
Grommet Screw
Qty: 1

13
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Technical Specications
VESA
75 x 75
100 x 100
LB
kg
Weight
17.6 lb. (2 x 8 kg)
Screen Size
Max. 32 “
Rotation
- 180o to + 1800

14
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Tilt
- 100to + 100
Swivel
- 100to + 100

15
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Requirements
• Phillips Head Screwdriver x 1
• Displays x 2

16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Assembling the Monitor Mount
Using the C-Clamp
1. Align the Screw Holes (x 4) on the top of the Upper
C-Clamp with the Screw Holes on the bottom of the Base.
Aligning the Upper C-Clamp with the Base
2. Insert the Countersunk Hex Screws through the Screw
Holes on the Upper C-Clamp and into the Screw Holes on
the bottom of the Base.

17
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installing the Button Head Screws
3. Using the 4 mm Hex Key tighten the Countersunk Hex
Screws being careful not to over-tighten.
4. Remove the backing from the Adhesive Foam Pad.
Removing the Adhesive Backing
5. Carefully apply the Adhesive Foam Pad to the bottom side

18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
of the upper portion of the Upper C-Clamp.
Applying the Adhesive Foam Pad
6. Using the 4 mm Hex Key, loosen the four Screws on the
back of the Lower C-Clamp.

19
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Loosening the Screws on the Lower C-Clamp
7. Insert the four Screws on the back of the Lower C-Clamp
through the large portion of the Screw Holes on the back of
the Upper C-Clamp. Slide the Screws down into the small
portion of the Screw Holes.
Attaching the Lower and Upper C-Clamp
8. Using the 4 mm Hex Key, tighten the four Screws, to create
the C-Clamp Assembly.