StarTech.com ARMQUADSS User manual

Manual Revision: 05/31/2019
User Manual
For the latest information and specications visit
www.startech.com/ARMQUADSS
Quad Monitor Stand - Silver
SKU#: ARMQUADSS
*actual product may vary from photos

i
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and
other protected names and/or symbols of third-party companies not related in
any way to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service
by StarTech.com, or an endorsement of the product(s) to which this manual
applies by the third-party company in question. Regardless of any direct
acknowledgement elsewhere in the body of this document, StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and
related documents are the property of their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United
States or other countries.

ii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Safety Statements
• Product installation and/or mounting should be completed by a certied
professional as per the local safety and building code guidelines.
• Cables (including power and charging cables) should be placed and routed
to avoid creating electric, tripping or safety hazards.
Mesures de Sécurité
• L’installation et/ou le montage du produit doit être réalisé par un
professionnel certié et dans le respect des normes locales et du code de
construction local.
• Les câbles (y compris les câbles d’alimentation et de chargement) doivent
être placés et acheminés de façon à éviter tout risque électrique, de chute ou
de sécurité
安全対策
• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に
従い、有資格の専門業者が行うようにしてください。
• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回し
を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう
にしてください。
Misure di Sicurezza
• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un
tecnico professionale certicato che conosca le linee guida locali sulle norme
edilizie e sulla sicurezza.
• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati
e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o
pericoli per la sicurezza.
Säkerhetsåtgärder
• Installation och/eller montering får endast göras av behöriga yrkespersoner
och enligt gällande lokala förordningar för säkerhet och byggnormer.
• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så
sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.

iii
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Warning Statements
• Make sure to assemble this product according to the instructions. Failure to
do so might result in personal injury or property damage.
• Make sure that the weight of the monitors doesn’t exceed the weight
capacity of this product. If you exceed the weight capacity, you might
experience personal injury or damage to the equipment. This product can
support the following weight: 17.6 lb. (8 kg) per monitor mount.
• Never operate this product if parts are missing or damaged.
Varningsmeddelanden
• Se till att du monterar produkten i enlighet med instruktionerna. Om du inte
gör det kan skada på person eller egendom uppstå.
• Se till att skärmens vikt inte överstiger produktens viktkapacitet. Om
viktkapaciteten överstigs kan skada på person eller utrustning uppstå. Denna
produkt har stöd för följande vikter: 8 kg per skårm.
• Använd aldrig produkten om delar saknas eller är skadade.
Avertissements
• Assemblez ce produit conformément aux instructions. Si vous ne respectez
pas ces instructions, vous risquez de vous blesser ou d’endommager
l’équipement.
• Vériez que le poids du moniteur ne dépasse pas la capacité pondérale du
produit. Si vous dépassez la capacité pondérale, vous risquez des blessures
corporelles ou des dommages matériels. Ce produit peut supporter 8 kg par
’ecran.
• N’utilisez pas ce produit si des pièces sont endommagées ou manquantes.
Warnhinweise
• Montieren Sie dieses Produkt gemäß den Anweisungen. Anderenfalls kann
dies zu Verletzungen von Personen oder Schäden an Eigentum führen.
• Das Gewicht des Monitors darf die zulässige Traglast des Produkts nicht
übersteigen. Wenn die Traglast überschritten wird, kann dies zu Verletzungen
von Personen oder Schäden an Geräten führen. Dieses Produkt ist für
folgendes Gewicht geeignet: 8 kg per monitor.
• Das Produkt darf nicht bedient werden, wenn Teile fehlen oder beschädigt
sind.

iv
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Dichiarazioni di Avvertenza
• Assemblare il prodotto rispettando le istruzioni. Il mancato rispetto delle
istruzioni potrebbe causare danni a persone o proprietà.
• Vericare che il peso del monitor non superi la capacità di supporto del
prodotto. In caso di superamento della capacità di supporto potrebbero
vericarsi danni a persone o apparecchiature. Il prodotto è in grado di
supportare i seguenti pesi: 8 kg per monitor.
• Non utilizzare il prodotto in presenza di parti mancanti o danneggiate.
Mensagens de Aviso
• Certique-se de que monta este produto de acordo com as instruções.
O incumprimento pode resultar em ferimentos pessoais ou danos de
propriedade.
• Certique-se de que o peso do monitor não excede a capacidade de peso
deste produto. Se exceder a capacidade de peso, pode sofrer ferimentos
pessoais ou danos no equipamento. Este produto pode suportar o seguinte
peso: 8 kg por monitor.
• Nunca opere este produto se faltarem peças ou estas estiverem danicadas.
Advertencias de Uso
• Asegúrese de ensamblar este producto según las instrucciones. De lo
contrario, pueden producirse lesiones personales o daños de propiedad.
• Asegúrese de que el peso del monitor no exceda la capacidad de carga de
este producto. Si se excede dicha capacidad se podrían producirse lesiones
personales o daños al equipo. Este producto tiene capicidad para el siguiente
peso: 8 kg por monitor.
• Nunca opere o ponga en funcionamiento este producto si faltan piezas o hay
daños en las mismas.
Waarschuwingen
• Zorg dat dit product volgens de instructies in elkaar wordt gezet. Indien dit
niet goed gebeurt kan lichamelijk letsel of materiële schade ontstaan.
• Zorg dat het gewicht van het scherm de maximale capaciteit van dit product
niet overschrijdt. Als u de gewichtscapaciteit overschrijdt, kan persoonlijk
letsel of schade aan de apparatuur ontstaan. Dit product ondersteunt het
volgende gewicht: 8 kg per monitor.
• Gebruik dit product nooit als er onderdelen ontbreken of beschadigd zijn.

v
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
注意
• 必ず取扱説明書に従って本製品の組み立てを行って下さい。取り扱いを誤
った場合に、傷害を負う恐れや物的損害が発生する恐れがあります。
• 取り付けるモニターの重量が、本製品で定められた最大積載重量を超えな
いようにして下さい。最大積載重量をオーバーした場合、傷害を負う恐れや
モニターや本製品に損害が発生する恐れがあります。本製品は、モニター1
台あたり8kgまで支持できます。
• 本製品で使用している部品の一部が紛失していたり損傷している状態で使
用するのは絶対に止めて下さい。

Table of Contents
Compliance Statements................................................................................... i
Safety Statements .............................................................................................. ii
Warning Statements.......................................................................................... iii
Product Information.......................................................................................... 1
Package Contents ..................................................................................................................................... 1
Product Diagram ................................................................................................ 3
Dimensions.................................................................................................................................................. 3
Front View.................................................................................................................................................... 4
Rear View...................................................................................................................................................... 5
Side View...................................................................................................................................................... 6
Technical Specications ................................................................................... 7
Requirements ...................................................................................................... 8
Assembly............................................................................................................... 9
Assemble the Base.................................................................................................................................... 9
Adjust the Collar on the Lower Pole................................................................................................... 10
Attach the Shoulder to the Lower Pole............................................................................................. 11
Attach the Swivel Arms to the Lower Pole....................................................................................... 12
Attach the Upper Pole............................................................................................................................. 14
Adjust the Collar on the Upper Pole................................................................................................... 15
Attach the Shoulder to the Upper Pole............................................................................................. 16
Attach the Swivel Arms to the Upper Pole....................................................................................... 17
Attach the VESA Mounts to the Monitors......................................................................................... 18
Attach the VESA Mounts to the Swivel Arms .................................................................................. 20
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Adjusting the Monitors .................................................................................... 22
Tilt Adjustment .......................................................................................................................................... 22
Swivel Adjustment.................................................................................................................................... 23
Rotation Adjustment ............................................................................................................................... 23
Micro Height Adjustment.......................................................................................................................24
Cable Management ........................................................................................... 25

1
Swivel Arms
Qty: 4
VESA Mounts
Qty: 4
Shoulders
Qty: 2
Upper Pole
Qty: 1
Lower Pole
Qty: 1
Pole Connector
Qty: 1
Base
Qty: 1
Cable-
Management
Clips
Qty: 2
Screws:
M4x12 mm
M4x16 mm
M4x20 mm
Qty: 16 (of each)
Screws:
M5x12 mm
M5x16 mm
M5x20 mm
Qty: 16 (of each)
Spacers
Qty: 32
Washers
Qty: 16
Product Information
Package Contents

2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
3 mm Hex
Key with
Screwdriver Tip
Qty: 1
6 mm Hex Key
Qty: 1
User Manual
Qty: 1

3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram
Dimensions

4
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Front View
1VESA Mounts
2Swivel Arms
3Pole Connector
4Base
1
3
2
4

5
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Rear View
5Shoulder
6Cable-Management Clip
5
6

6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Side View
7Upper Pole
8Lower Pole
7
8

7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Technical Specications
Type of Measurement Measurement
VESA Mounting Hole Pattern
75x75
100x100
Weight Capacity
Up to 17.6 lb. (8 kg)
Per Monitor
Tilt
+90 to -40
Maximum Screen Size
32” (813 mm)
Rotate
360
Swivel
360
kg

8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Requirements
For the latest requirements, please visit
www.startech.com/ARMQUADSS.
• Four Monitors
Note: All four Monitors must conform to the size, weight, and
VESA pattern requirements (see Technical Specications).
• Phillips Head Screwdriver
• Two People for Installation
• (Optional) Two People for Adjustments

9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Assembly
Warning! Make sure that all of the hardware is assembled
properly and checked for stability before you load the
Monitors.
Warning! Make sure that the weight of the Monitors does not
exceed the weight capacity of this product. If you exceed the
weight capacity, you might experience personal injury or
damage to the product.
Assemble the Base
1. Loosen the Hex Screws that are located on the Base using
the 3 mm Hex Key with Screwdriver Tip.
2. Slide the Cable-Management Clip onto the Lower Pole.
3. Screw the Lower Pole into the Base.
4. Tighten the Hex Screws that are located on the Base using
the 3 mm Hex Key with Screwdriver Tip. (Figure 1)

10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 1
Adjust the Collar on the Lower Pole
1. Loosen the Flat-Head Screws on the Collar, using the 3 mm
Hex Key with Screwdriver Tip.
2. Slide the Collar up or down the Lower Pole so that it sits at
the desired height for your Monitors.
3. Tighten the two Flat-Head Screws that are located on the
Collar, using the 3 mm Hex Key with Screwdriver Tip.
(Figure 2)
Collar
Cable-Management Clip
Base
3 mm Hex Key with
Screwdriver Tip
Lower Pole

11
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 2
Attach the Shoulder to the Lower Pole
1. Rotate the Lever on the Shoulder down/counterclockwise
to loosen the Shoulder. Freely rotate the Lever by pulling it
away from the Shoulder and rotating it to the top position,
then rotate the Lever down/counterclockwise to loosen the
Shoulder.
Note: The Lever has a ratchet feature. Freely rotate the
Lever, without engaging the tightening mechanism, by
pulling it away from the Shoulder and rotating it to the
desired position. Release the Lever and rotate it to engage
the tightening mechanism.
2. Slide the Shoulder over and down the Pole, until it makes
contact with the Collar.
3. Freely rotate the Lever to the bottom position and rotate the
Lever up/clockwise to tighten the Shoulder.
(Figure 3)
Collar
3 mm Hex Key with
Screwdriver Tip

12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attach the Swivel Arms to the Lower Pole
1. Insert the Swivel Arms into the Sockets of the Shoulder
until each Swivel Arm clicks into place. (Figure 4)
To remove the Swivel Arms: Locate the Clip on the
bottom of the Swivel Arms. Toggle this Clip sideways and
pull upwards.
Shoulder
Figure 3
Shoulder
Lever