STARVILLE DMX Joker V2 1024 Box User manual

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [email protected] DocID: 547118_04.10.2022
Safety instructions
Intended use
This device is intended to control lighting devices and eects via computer using
appropriate software. Any other use or use under other operating conditions is con-
sidered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure
that children do not detach any small parts from the product. They could
swallow the pieces and choke!
Quick Start Guide
This quick start guide contains important information on the safe operation of the
product. Read and follow the safety advice and instructions given. Retain the quick
start guide for future reference. If you pass the product on to others please include
this quick start guide.
Where to use the product
Never use the product
• in direct sunlight
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet
• near magnetic elds
General handling
• To prevent damage, never use force when handling the product.
• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not
use liquid cleaners such as benzene, thinners or ammable cleaning agents.
Features
• Interface for Stairville DMX Joker, DMX Joker Pro, and DMX Joker V2
• Two DMX universes (1024 channels) via DMX or ArtNet
• Ideal for advanced users, experienced lighting professionals and demanding
projects
• Perfectly suitable to control live shows, audio and video timeline synchronisa-
tions, and precise sound-to-light automation
• The reliable DMX Joker software transforms every computer into a powerful
lighting control console
• Connection via Ethernet LAN and works simply as ArtNet/sACN-to-DMX decoder/
converter/node
• Easily controllable stand alone function using ‘NEXT’ or infrared remote control
(item. 551967, not supplied)
Connection
EN
1 Ethernet connector (RJ45)
on, o: No signals
fast blink, o: USB signal
on, fast blink: Ethernet signal
slow blink, o: Stand Alone DMX
on, slow blink once: Node (ArtNet)
on, slow blink twice: Node (sACN)
2 Input socket for the mains cable (USB-C)
3 Infrared sensor for the optional remote control
4 Button to select the next scene (NEXT) or the mode (NODE)
DMX Joker V2 1024 Box
USB ETHERNET
DMX Jok
er V2 1024 Box
DMX
DMX
DMX Joker V2 1024 Box
ö # %$

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [email protected] DocID: 547118_04.10.2022
EN
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these ma-
terials with your normal household waste, but make sure that they are collected
for recycling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equip-
ment Directive (WEEE) in its currently valid version. Do not dispose of your old
device with your normal household waste. Dispose of this product through an
approved waste disposal rm or through your local waste facility. Comply with
the rules and regulations that apply in your country. If in doubt, consult your
local waste disposal facility.
DMX Joker V2 1024 Box
Hardware Features
DMX output 1024 (2 × 512) per interface, Live PC and Stand Alone
Inputs and outputs USB-C, RJ45 (DHCP or static IP),
2 × XLR chassis socket, 3-pin (optional 5-pin)
Ethernet (10 Mb/s) yes (LAN, compatible with WiFi router)
Max. interfaces connected 12 via USB, 128 via Ethernet
RDM (Remote Device Management) yes (only with DMX Joker V2 software)
NODE, ArtNet/sACN-to-DMX decoder yes (2 × 512 outputs per interface)
DMX modes DMX In/Out, DMX Splitter, DMX Record, DMX Trigger
Zone (Stand Alone) 1, play 1 scene/sequence at a time
Memory step capacity 100 ~ 1024 (300 KB)
Infrared (scenes, play, pause, dimmer, speed) yes (optional remote control, not supplied)
Button Next scene (NEXT) or mode selection (NODE - hold pressed 5 seconds)
UDP/Ethernet triggers and commands (SDK) yes (requires WiFi router)
Operating voltage 5 V / 0.2 A via USB-C
Dimensions (W × H × D) 70 mm × 48 mm × 89 mm
Housing Aluminium, brushed
Weight 200 g
Ambient conditions Temperature range 0 °C…40 °C
Relative humidity 20 %…80 % (non-condensing)
Software Features
DMX Joker V2 yes
DMX Joker / DMX Joker Pro up to 64 x 512 ArtNet outputs
STUDIO DMX 3D viewer in real time (full mode)
ArtNet/sACN output (DMX Joker, DMX Joker Pro) 2 × 512 per connected interface
Audio, video, and lighting timeline yes (30 minutes synchronisation)
MIDI, RS232, DMX IN, Keyboard, Hyperlinks yes
MIDI control, Audio BEAT, BPM, UDP yes
User interface customisation yes
System requirements Smartphone/Tablet Android® 5 (or higher) / iOS® 10 (or higher)
1 GHz CPU, 1 GB RAM, 60 MB disk
screen resolution 1280 × 800
WIFI 802.11 b/g/n
System requirements PC Windows®, Mac OS®, Linux® (32 or 64 bit)
2 GHz CPU (2 cores), 8 GB RAM, 2 GB RAM graphic card (only for 3D)
600 MB disk, screen resolution 1920 × 1080
1 × USB port, 1 × Ethernet connector (RJ45)