State Water Heaters GS6 40 YBVIT, GS6 40 HBVIT, GS6 50 YBVIT, GS6 50 HBVIT, GS6 40 YBVIT 2, GS6 40 HBVIT 2, GS6 50 YBVIT 2, GS6 50 HBVIT... User manual

RESIDENTIAL
Code Compliance – All models meet or exceed federal minimum energy standards
effective January 20, 2004, according to latest editions of the National Appliance
Energy Conservation Act (NAECA). They also comply with the latest editions of the
B.O.C.A. National Codes, C.E.C., U.B.C., S.B.C.C., C.A.B.O. and the H.U.D. standards.
All models design-certified by CSA International according to ANS Z21.10.1 standards
governing storage-type water heaters.
SELECT POWER DIRECT VENT
Residential Gas Water Heaters
Power Direct-Vent Design – Two-pipe closed-combustion system draws all
make-up air from outside the home, eliminating problems caused by insufficient indoor
ventilation. For installation versatility, system permits combined horizontal and vertical
venting and air intake runs up to 45 feet (including one 900elblow using 3” Schedule 40
PVC, CPVC or ABS pipe.
New Intelli-Vent Gas Control – Equipped with nealry-indestructible silcon
nitride hot surface igniter, and advanced electronics for more precise control of water
temperature and easy to understand system diagnostics.
Quiet Modular Blower – Equipped with 110/120 volt electrical sytem (rating 3
amps or less), 7-foot cord, standard 3-prong male connector.
Diffuser Dip Tube – Helps reduce lime and sediment buildup, maximizes hot water
output. Made of State PEXAN™, a cross-link PEX polymer that can withstand long-term
exposure to water temperatures up to 4000F.
Green Choice™Eco-Friendly Gas Burner – Patented design reduces NOx
emissions up to 33% and complies with Southern California and Texas requirements.
Durable Brass Tamper-Resistant Drain Valve.
Glasslined Tank – For long-lasting protection against rust and corrosion.
Aluminum Anode Rod – For additional protection against rust and corrosion.
Factory-Installed Temperature & Pressure (T&P) Relief Valve.
Thick, CFC-Free Foam Insulation.
6-Year Tank and Parts Warranty.
For more information on Select®contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800.365.0024 Toll-free USA
www.statewaterheaters.com
SRGSS00107 January 2012R
243817_SRGSS00107.indd 1243817_SRGSS00107.indd 1 1/27/12 9:37 AM1/27/12 9:37 AM

RESIDENTIAL
For more information on the Select Power Direct-Vent contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800-365-0024 Toll-free USA
www.statewaterheaters.com
SRGSS00107 January 2012R © 2011 State Industries
For complete information on limited warranties, consult written warranty, or contact the State Customer Care Center, 1-800-365-0024.
State Industries, Inc. reserves the right to make product changes or improvements without prior notice.
IMPORTANT: VENTING AND COMBUSTION AIR REQUIREMENTS
Read and follow requirements shown in the Installation Manual for Select
Power Direct-Vent Gas water heaters dealing with type, placement and length
of vent pipe and vent termination, as well as clearances required to provide
adequate combustion air and proper ventilation.
E
C
4"
MODEL
PEAK
ENERGY GAL. BTU INPUT RECOVERY R
DIMENSIONS IN INCHES
APPROX.
NUMBER
DEMAND
FACTOR CAP. PERHOUR 90°FRISE VALUE* SHIPPING
OUTPUT
NATURAL† GALLONS † ABCDEF
DRAFT WEIGHT
(1st Hour HOOD (LBS.)
Rating OUTLET
Gallons)
GS6 40 YBPDT 70 .60 40 40,000 41 16 57 48-1/2 21 15 8 42 3 224
GS6 50 YBPDT 87 .59 50 40,000 41 16 66 57-1/2 21 15 8 51 3 232
GS6 50 YRPDT 5 105 .58 50 65,000 64 16 69-1/2 61 21 15 8 54-1/2 3 232
GS6 75 YRPDT 130 .58 75 70,000 72 16 71-1/2 61-1/2 26-1/4 15-1/2 8 54-3/4 3 300
For model number GS6 50 YRPDT 5, 5’ of 3” ABS vent pipe is supplied and must be used for the first 5’ of the exhaust outlet vent system.
FormodelnumberGS675YRPDT,5’of3”CPVCventpipeissuppliedandmustbeusedforthefirst5’oftheexhaustoutletventsystem.
Recoveriesareroundedtonearestgallon
Water Connections – 3/4" on all models
When ordering Propane, change “Y”to“H” in model number (GS6 40 HBPDT)
†PropaneGasInputs/Recoveries– GS640HBPDT: 36,000BTU/37GPH
GS6 50 HBPDT: 38,000 BTU / 39 GPH
GS6 50 HRPDT 5: 60,000 BTU / 59 GPH
GS6 75 HRPDT: 65,000 BTU / 67 GPH
*R Value shown is “Performance Rated”
IMPORTANT:
SEE INSTALLATION MANUAL FOR COMBUSTION AIR AND VENTING SYSTEM
REQUIREMENTS FOR POWER DIRECT-VENT WATER HEATERS
OPTIONAL (DELUXE) ROUND HORIZONTAL
VENT TERMINATION KIT
Part Number 9002749
OPTIONAL (DELUXE) SQUARE HORIZONTAL
VENT TERMINATION KIT
Part Number 9003328
SELECT POWER DIRECT VENT
Residential Gas Water Heaters
243817_SRGSS00107.indd 2243817_SRGSS00107.indd 2 1/27/12 9:37 AM1/27/12 9:37 AM