Steelcase Montage User manual
Page 1 of 5
939504726 Rev D
®
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©2001 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
Flat Tool - ZFT
Montage®Locking Tile
Flat Tool - ZFTE
Page 2 of 5
939504726 Rev D
consolidation point tile
4 rivets
lock bracket
locking tile
1.
2.
1. Locate and identify the consolidation point tile.
2. Unpack and identify parts:
• Locking tile (1)
• Lock Bracket (1)
• Rivet (4)
Page 3 of 5
939504726 Rev D
3. Verify that the mounting plate is centered
(horizontally) on the frame.
Centered
Page 4 of 5
939504726 Rev D
SLOTS
LOCK BRACKET
4.
5.
4. Install lock bracket to frame by
inserting slots on bracket to tabs on the
mounting plate.
5. Use a 3/16" drill bit to drill 4 holes on
frame which correspond to holes on lock
bracket. Use the lock bracket as your
drilling guide.
Page 5 of 5
939504726 Rev D
6.
7.
7a.
6. Use four (4) rivets to attach lock
bracket to frame.
NOTE: Install Cable ID Bag to back of
locking tile.
7. Install locking tile and turn key to lock.
8. Make sure locking tile is secure both
top and bottom.
Table of contents
Other Steelcase Industrial Equipment manuals
