Stellar Home S 220 User manual

1
5
4
6
6
7
7
232X
1
8 8
From : Stellar Home Furniture
Manufactured by : CymeTech inc.
[email protected]
1 of 4
Special Notes :
To make the assembly simple and ell done, you have to be familiar ith the parts.
Follo the step-by-step instructions on a clean area ( ex. carpet). Read the instructions
before starting the assembly.
Assembly tools required : Hammer, Phillips scre driver #2 and #3
S 220
ASSEMBLY INSTRUCTIONS, PLATFORM BED 60''
ITEM QTY DESCRIPTION
1 2 Side rails
2 1 End rail
3 2 Left and right sides
4 1 Front panel
5 3 Top panels center
6 2 Top panels side
7 2 Cross-piece supports, long
8 3 Cross-piece supports, short

M8 assembly scre
9 16X
4
7
7
3
11
3
Scre holes on top
5/8'' thick
Edgebands this end
1/2'' thick 1/2'' thick
8
12 4X
8
8
1/2'' thick
9
6
6
5
55
Sub-assembly
upright
16X13
Scre #8 - 1"
barbed do el
5mm
Pre-assembly check list hardware pack
ITEM 9 : 40x ITEM 11 : 1 xITEM 10 : 41x
Step 1
S 220
Step 2
24X
13X
Install glides on panels individually first
ITEM 12 : 4x ITEM 1 : 16x
From : Stellar Home Furniture
Manufactured by : CymeTech inc.
[email protected]
2 of 4
Scre cap
2 glides on
this part
Glide

No gap fit
Align pieces,
2 sides
2 mm
5/64'' gap
approx.
2 mm
5/64'' gap
approx. From : Stellar Home Furniture
Manufactured by : CymeTech inc.
[email protected]
3 of 4
Step
S 220
Bottom view
10
41X
a) Center and secure end rail first
b) Align ith end rail, parallel
to bed( 3/8'' gap), secure
1
1
2
Tilt assembly on a block
for easier scre ing

From : Stellar Home Furniture
Manufactured by : CymeTech inc.
[email protected]
Warranty
Garantie
4 of 4
The arranty from Cyme Tech covers defects in material and
orkmanship for a period of 5 years from the date of purchase. The
original purchase receipt is required as proof of purchase. This arranty is
limited to the replacement of defective parts.
This arranty does not cover normal ear and tear, scratches, alterations
and intentional and non-intentional damages.
This arranty does not cover the product if it has been placed outdoors or
in a humid environment.
This arranty is only valid for purchas
es made at an authorized Cyme Tech
dealer in Canada and in the United States.
This arranty defines the limits of Cyme Tech’s liability and entitles the
original buyer to specific rights. Any arranty defined by la in your state
or province is limited to a period of 5 years. If the la in your state or
province prohibits this restriction, then it does not apply.