7、Power off/Clear off
Machine will power off if press this button long time at any status. Press
this button shortly, the last measurement data can be cleared. It will return to
the single measurement mode interface after the data is cleared.
Machine measuring operation
8、Single measurement
On the condition that power on, enter single measuring mode. Press
measuring button shortly, measurement with laser point. Display screen will
show as picture 8-1.
8-1
9、Continuous measurement
On condition that measuring mode single, press measuring button long
time, enter into Continuous measurement mode, display screen will show as
9-1. Press clear off button, pause continuous measurement and quit continuous
measurement mode.
Minimun value during
continuous measurement
9-1
10、Area measurement
On the condition that power on, enter into area measuring mode. Press
measuring button shortly. The result of area measurement will be displayed
on screen, show as picture 10-1.
10-1
11、Volume measurement
On the condition that power on, enter into volume measuring mode. Press
measuring button shortly, Measure the length, width and height of the target
to be measured separately. The result of volume measurement will display on
screen, show as 11-1.
12、Pythagorean measurement 1
On the condition that power on, switch pythagorean measurement
mode.Press measuring button shortly, measuring the length of the
hypotenuse for first time; Keep datum mark not change, laser meter on
horizontal position, measure the length of the right-angle side for the second
time. The height of the right triangle is displayed on the screen,show as picture
12-1.
Number of hypotenuse measure
Number of right angle side
Number of height measure
Number of height measure
13、Pythagorean measurement 2
On the condition that power on switch pythagorean measurement mode.
Press measuring button shortly, measuring the length of the hypotenuse for
first time; Keep datum mark of machine not change, laser meter is in horizontal
position. Measure the length of the right-angle side for the second time, Keep
datum mark of machine not change, and the laser meter is in the horizontal
position, measure the length of the hypotenuse for the third time. The height of
the triangle will displayed on the screen, show as 13-1.
Number of hypotenuse
Number of right angle side
Number of hypotenuse
Number of height measure
13-1
Note: This instrument can calculate the distance automatically by Pythagorean
theorem. This function is designed for measuring places that are not easy to
reach.
Please strictly obey the following measurement sequence: all measured
points must be in the same horizontal or vertical plane, and the triangle must be
with a right angle formed by the instrument and the two targets. In order to get
the best measurement results, it is recommended to fix the instrument on one
point.
14、Pythagorean measurement 3
On the condition that power on switch indirect Pythagorean Measurement
Model. Press measuring button shortly, measuring the length of the
hypotenuse for first time; Keep datum mark of machine not change, laser meter
is in horizontal position. Measure the length of the right-angle side for the
second time, Keep datum mark of machine not change, and the laser meter is
in the horizontal position, measure the length of the hypotenuse for the third
time. The height of the triangle will displayed on the screen, show as 14-1.
14-1
Note: This instrument can calculate the distance automatically by Pythagorean
theorem. This function is designed for measuring places that are not easy to
reach.
Please strictly obey the following measurement sequence: all measured
points must be in the same horizontal or vertical plane, and the triangle must be
with a right angle formed by the instrument and the two targets. In order to get
the best measurement results, it is recommended to fix the instrument on one
point.
15. Hypotenuse triangle area measurement
On the condition that power-on, enter the triangle area measurement mode.
Short press the measuring button to measure the three sides of the triangular
target separately. The area measurement result is displayed on the screen, as
shown in Figure 15-1.
First side
15-1
16. Number addition and subtraction measurement
After the instrument turned on, it enters the individual measurement
mode. Short press the button of plus and minus , the symbol of "+"
appears on the screen, indicating that the main display line will be added to the
third line of data. Short press the measure button to perform the
measurement. The result of the first addition will be displayed as picture 16-2.
Short press the measure button again to measure, and the result of the second
addition will be displayed as picture 16-4.
Short press the plus and minus button to cycle between "+" and "-". If
it is subtraction, it means that the main display line subtracts the third line of
data. (Note: The default main display line at power-on is 0.000m)
The third line
Main display line
16-1 16-2
The second line
The third line
Main display line
16-3 16-4
Appendix
Display Error code
Display both “ infocode ” and “error”, the following error can be corrected.
Service
一、We provide 1 year warranty Service since clients buy the machine.
二、The following condition we not offer warranty service.
1、The machine with deleted code.
2、Repair machine without permission and authorization
3、Error caused by Man-made damage or storage incorrectly
4、Instruments with expired warranty period.
三、Warranty service must offer us with warranty card what purchasing date,
type, the number of machine.
四．warranty card
Warning
Electromagnetic radiation may cause
interference to other equipment, devices
(such as pacemakers or hearing aids, and
medical instruments,) and aircraft. It may
influence humans and animals also.
Prevent Measures:
Although this product complies with the most strict standards and regulations,
the original manufacturer cannot rule out the possibility of harm to humans and
animals completely.
●Don’t using this product on the condition that near gas stations, chemical
plants, potentially flammable gases and environments where blasting occurs.
●Don’t using this product near with medical equipment.
●Don’t using this product on airplane.
●Don’t using this product near body for long time.
Company：Chengdu Ht Innovation Technology Co., Ltd.
Tel：028-85361557
Using within
allowable range
Turn on/off the
instrument, check
the content
displayed on the
screen, and
contact after-sales
Maximum value
During continuous measurement
Current measurement value
During continuous measurement
Number of Volume
calculate
Number of right angle side
3
Number for height of hypotenuse
2
Calculated value of triangle area
