Datacolor ColorReader DC10-2 User manual

Datacolor ColorReader
Model DC10-2
User Guide

•ii Datacolor ColorReader
Datacolor ColorReader™ User Guide
All efforts have been made to ensure the accuracy of the information presented in this format.
However, should any errors be detected, Datacolor appreciates your efforts to notify us of these
oversights.
Changes are periodically made to this information and are incorporated into forthcoming versions.
Datacolor reserves the right to make improvements and/or changes in the product(s) and/or
program(s) described in this material at any time.
Copyright © 2018 Datacolor. ALL RIGHTS RESERVED. This material may not be reproduced or
duplicated, in whole or in part, with the express written permission of Datacolor.
To obtain information on local agents visit our website at www.datacolor.com.
Contact Us
Please contact our service department by telephone or email for questions or problems.
http://goto.datacolor.com/colorreadersupport
In urgent cases you can contact us by phone:
Europe: 00800 700 800 70
USA: 800-438-2585

Datacolor ColorReader •iii
CONTENTS
DATACOLOR COLORREADER ................................................................................................................................................1
INTRODUCTION.............................................................................................................................................................................1
DATACOLOR COLORREADER GENERAL INFORMATION ..........................................................................................................................2
GETTING STARTED ............................................................................................................................................................... 4
WHAT’S IN THE BOX? ....................................................................................................................................................................4
INSTRUMENT CONTROLS AND INDICATORS .........................................................................................................................................4
SLEEP MODE................................................................................................................................................................................5
MOBILE APPLICATION.......................................................................................................................................................... 6
GETTING STARTED ........................................................................................................................................................................6
APPLICATION INSTALLATION INFORMATION........................................................................................................................................6
DEVICE REGISTRATION ...................................................................................................................................................................6
MAIN SCREEN ..............................................................................................................................................................................7
CALIBRATION ...............................................................................................................................................................................8
SAMPLE MEASUREMENT ................................................................................................................................................................8
SEARCH RESULTS ..........................................................................................................................................................................9
DEVICE .....................................................................................................................................................................................10
MANAGE PROJECT COLORS ............................................................................................................................................... 12
FAN DECK MANAGEMENT ............................................................................................................................................................12
PALETTE MANAGEMENT ..............................................................................................................................................................15
READINGS MANAGEMENT ............................................................................................................................................................20
APPENDIX .......................................................................................................................................................................... 23
INSTRUMENT SPECIFICATIONS .......................................................................................................................................................23
MOBILE APPLICATION SPECIFICATIONS ............................................................................................................................................24

•iv Datacolor ColorReader
This page intentionally left blank

Datacolor ColorReader •1
Datacolor ColorReader
Introduction
Datacolor ColorReader Model DC10-2 is an accurate color reader designed to measure an
inspiration color and report the nearest reference color from a proprietary color system.
You can use Datacolor ColorReader to quickly and accurately
measure samples, and find the closest color matches in a fan
deck collection stored on the mobile application. Then you
can make final color selections on the spot.
Bluetooth connectivity works with the Datacolor ColorReader mobile
application when installed on portable devices including cell phones
and tablets. Using this mobile application, you can easily store, recall,
and examine project color information in real time.
About this Guide
This guide covers the following:
•Datacolor ColorReader device set up and operation
•Features and operation of the Datacolor ColorReader mobile application
Manufactured:
At Datacolor location DS001
Datacolor Suzhou
288 Shengpu Road
Suzhou, Jiangsa
P.R. China 215201

•2Datacolor ColorReader
Datacolor ColorReader General Information
Power Source
Datacolor ColorReader Model DC10-2 has a rechargeable lithium battery. The battery is
charged using the micro USB cable included in the package.
Operation
This product is to be used only as specified by the manufacturer, and according to the
instructions for operation and maintenance provided herein.
Wireless Communication Capability
Datacolor ColorReader is Bluetooth®-capable (4.0 or higher)
Optical Configuration
45°/0° type
Colorimetric Data
1976 CIE L*a*b* coordinates; Illuminant D65; 10° Standard Observer
Replacement Parts
There are no user-installed replacement parts.
Device Markings
Several markings on the inside of the unit cap includes the
following information:
•Instrument Model
•Ratings
•Compliance and certification information
Serial Number
The serial number is programmed into Datacolor ColorReader and is displayed on the
bottom of the box and in the mobile application under the device tab.
Instrument Maintenance
There are no user-serviceable parts for this equipment.
Safety Warnings
Caution
If any of the following conditions exist, disconnect the USB cable:
•The USB cable is damaged.
•The device is exposed to water or other excess moisture.
•The device is dropped or damaged.
•The device needs service.
The protection of the device may be impaired if used in a manner not specified by the
manufacturer.

Datacolor ColorReader •3
To insure operational safety:
•Keep the device away from sources of liquids such as sinks, tubs, showers, etc.
•Protect the device from excess moisture.
•Follow all instructions and warnings provided with the unit.
•Read all instructions carefully before connecting the device to charge.
Mobile Application Requirements
The requirements to run Datacolor ColorReader mobile application include:
Device Operating System
IPhone® IOS® v. 9.3 or higher
IPod Touch® IOS v. 9.3 or higher
Android©6.0 or higher
Bluetooth® v. 4.0 or higher

•4Datacolor ColorReader
Getting Started
What’s in the Box?
The product includes the measuring device with calibration cap and
micro-USB charging cable.
Accessories
Instrument Controls and Indicators
This section identifies all controls and indicators on the device,
On/Off Button
•To turn off the device, press and hold the
button until the LED light turns off.
On/Off Button
Aperture USB Port
USB charging cable
LED
Calibration Cap

Datacolor ColorReader •5
Battery Information and LED Indicator
Datacolor ColorReader is equipped with a rechargeable lithium battery. A micro-USB cable
is provided to charge the unit. When fully charged, the charge is good for
300 measurements.
An LED indicator displays the current state of the device. See Status LED
for details.
Cable Connections and Instrument Charging
Datacolor ColorReader has a micro USB port and a micro USB
cable for charging
To charge:
•Plug the small end of the USB cable into the device.
•Plug the other end into a USB port on a computer or
adapter.
Status LED
An LED indicator identifies the current state of the unit. Below is a list of possible instrument
states:
LED Color Instrument State
Off •Device is not powered and is not charging
Green Solid
•Device is On and battery life is greater than 10%
•Device is charging
Amber Slow blink
•Device is not being charged and battery life is less than 10%
Sleep Mode
Datacolor ColorReader will go to sleep when it is inactive for more than 5 minutes.
When the device is in sleep mode and you try to
access it through the mobile application, it will ask
you to wake the unit.
•Press the button on the top of the device.

•6Datacolor ColorReader
Mobile Application
Getting Started
To install the Datacolor ColorReader mobile application:
•Install the ColorReader mobile application from the Apple App Store or Google Play
Store.
•Plug in your device to charge, then Wake the unit by pressing the on/off button at
the top.
•Launch mobile application.
•Register. You must register the product to use it.
•
Application Installation Information
Please visit goto.datacolor.com/getcolorreader for more installation information.
Device Registration
When you connect your charged Datacolor ColorReader to the mobile application for the first
time, the software guides you through a registration process. You must register the
Datacolor ColorReader to use it. If you have been given an access code select I have an
access code and enter it there.
1. Launch the Datacolor ColorReader mobile application.
The program will prompt you to identify your device.
2. Tap on the device you are using. The
program will display a registration screen.

Datacolor ColorReader •7
2. Enter your contact information and user type, the access
code (if you have one), scroll to the bottom of the screen to
choose whether you would like to subscribe for updates and
share data, and click to agree to the Terms and Conditions
and Privacy Policy. Tap Register.
If you do not have an access code, you will need to select
the region that applies to you to access your color
collections.
No Access Code:
Main Screen
Below is the Datacolor ColorReader main screen. You can access the application features
from the icons at the bottom of the screen.
Device
Readings
Fan Decks
Palettes

•8Datacolor ColorReader
Calibration
Calibrate the device every 8 hours to account for any changes in the device over time. This
ensures that the measurements remain consistent over time. The Datacolor ColorReader
mobile application will remind you when calibration is required. Use the mobile application to
calibrate the unit.
1. After connecting,
tap Device in
bottom left corner
You will see the Manage
Device screen.
2. Screw the calibration cap securely in place
on top of the aperture end of the device.
3. Tap Calibrate.
4. The application will report that the device is
calibrated. Tap Done in the top left corner to
return to the main screen.
Sample Measurement
1. Place the instrument aperture over the sample to be measured.
NOTE
Make sure the aperture is flat to the surface and the color completely fills the
aperture opening.
2. Press the ‘Read’ button on the bottom of the mobile application screen.
The mobile application screen immediately displays the results.

Datacolor ColorReader •9
Search Results
When you measure a sample, Datacolor ColorReader mobile application finds the closest
matches stored in its fan deck database. It automatically displays the 3 closest matches on
the portable device.
1. Tap one of the matches. The screen displays details about the selected color.
See Color Lookup for the search results displayed when working in stand-alone
mode.
See Add to Palette for details to select a color and assign it to a palette.
Fan Deck, Palettes and Readings options
See Fan Deck Management for additional information.
See Palettes for additional information.
See Readings for additional information.
Fan Deck Name
Color Name
Color Number
CIE L*a*b*/RGB/CMYK/HEX values
Color of Measured Sample Three closest fan deck colors
NOTE
The L*a*b* values are valid for
D65/10° Illuminant/Observer

•10 Datacolor ColorReader
DeviceThis option gives you access to the Device Info, Calibration, and Support options.
Device Info
Use this option to disconnect Datacolor ColorReader from the mobile application, and to
confirm technical information about the unit.
1. Tap Device, Device Info. Scroll down to view all of the information.
Disconnect Device
To disconnect:
•Tap Device, Device Info, Disconnect Device.
Calibration
Use this option to see the current calibration status and to run a
calibration. See Calibration for instructions.

Datacolor ColorReader •11
Support
Use this option to be sent directly to our Datacolor ColorReader online support site where
you can submit a ticket or call our representatives for any issues you may be experiencing.
1. Tap Device, then Support. Click Contact Customer Support to open
the support site in a internet browser window.

•12 Datacolor ColorReader
Manage Project Colors
Datacolor ColorReader mobile application includes three data
management options: Fan Decks, Palettes and Readings.
Fan Deck Management
Fan Deck Management lets you activate/deactivate fan decks included in the color search.
•Fan Deck Display. The Fan Decks option at the bottom of the screen displays the
fan deck colors in a visual color atlas. See Fan Deck Display.
•Fan Deck Selection. You can enable/disable fan decks stored in the database to be
used for color searches on the mobile application. See Fan Deck Search Selection.
Fan Deck Display
This option displays a visual atlas of the fan deck colors.
1. Tap on Fan Deck at the bottom of the
screen, and tap one of the fan decks.
2. Tap on one of the colors on the screen.
You will see the details of the color you
selected. You can add this color to a
palette.
See Add to Palette for instructions.
•Fan Decks. Displays the fan decks included in the database
•Palettes. Displays the colors selected for each project you are
running
•Readings. Displays the colors measured using Datacolor
ColorReader

Datacolor ColorReader •13
Fan Deck Search Selection
You can activate/deactivate individual fan decks used for color searches on the mobile
application. To add or change the selection:
1. Tap Readings and select a color,
or measure a color.
2. Tap Change.
3. You will see a list of all the fan
decks on the device.
4. Tap on an individual fan deck to activate or deactivate
for the search. Tap Match.
•Red: Activated
•Gray: Deactivated

•14 Datacolor ColorReader
5. When you change the fan deck selection, the color suggestions change. The results on the left
below are from the Color Preview deck. When the Color Preview selection was disabled, and
Color Journeys was activated, the results were immediately updated:
Color Preview Matches
Color Journeys Matches
6. You can select multiple fan
decks for the search.
7. The application will find the best matches from all fan
decks selected.

Datacolor ColorReader •15
Palette Management
Using the Datacolor ColorReader mobile application, you measure samples and find the
closest color matches in your database. When you make a final color selection, you can
store it in a palette. Palettes are collections of the colors you select for a specific project.
For example, all of the paint colors selected for a particular customer or a particular room
would be included in a single palette.
The mobile application includes options to create palettes, edit and delete information for
individual colors in a palette, and share palettes.
Tap on the Palettes option at the bottom of the screen to access all of the palette
management options.
First-Time Use
When you receive your Datacolor ColorReader and tap
Palettes, it will not include any palettes.
Create Palette
To create a palette, you must measure or select a color from the Readings list.
NOTE
You can create a new palette only when you are adding a color to a palette.
You can add, edit, or delete palette information at any time. See also Edit Palette Colors
options.
1. Measure a color or tap
Readings. Tap a color in
the list.
2. Tap one of the color
suggestions. 3. Tap New Palette.

•16 Datacolor ColorReader
4. Tap in the default palette name field
(Palette #1) to display a keyboard.
Replace the default palette name with
one of your choice.
5. Tap in the default color label field and
enter a label as needed.
6. Tap Save.
The color you added displays in the palette
on the Palettes List.
Add To Palette
To add colors to an existing palette:
1. Tap Readings and
select one of the colors.
2. You will see three color choices.
Tap one to display the details.
3. Tap Add to Palette.
4. Tap to select one of the
palettes.
5. View Palette displays. Tap Back.
6. The color displays in
the palette.
You can add a label to the color as an additional reference. See Edit Palette Colors for instructions.