Stellar Works UT-S431 User manual

UTILITY SOFA 3 SIDES S
ASSEMBLY INSTRUCTIONS
UT-S431
20180424

Assembly should be carried out by qualified professionals. Failure to
correctly assemble furniture may result in collapsing or toppling, and may
cause damage or injury.
All furniture pieces that are designed to lean against the wall must be
securely fixed to the wall with the appropriate fixing devices provided.
Please identify the type of wall, select the appropriate wall fitting and
ensure sufficient holding power before installation. If uncertain, please
seek professional advice.
No liability will be accepted for damage or injury caused by inappropriate
use or incorrectly installed furniture.
SAFETY DISCLAIMER
ATTENTION
Identify all components before assembling. If any components are missing,
please contact the dealer from whom you bought this product.
Select an appropriate location.
Place components on a soft surface to prevent damage during assembly.
Ensure no components are disposed of when discarding packaging.
Additional tools / power tools may be needed for installation.
Please seek professional advice.
Periodically check all fixings to ensure none have come loose, and re-tighting
when necessary.
Please keep these instructions for future reference.
__
__
__
__
__
__
__
1

HARDWARE LIST
B x 4
C x 2
A x 1
D x 1
2
H2 x 1
(4mm)
H1 x 12
(M6 x 25)
E x 1

STEP 1
B
B
B
B
A
3
12 X H2
H1

STEP 2
BBBB
A
E
4 5
X 2

4 5
150kg
MAX

stellarworks.com
[e-mail]