Hay NEW ORDER User manual

– INSTRUCTION MANUAL –
DESIGN BY STEFAN DIEZ
SHELVING SYSTEM
NEW ORDER

 TABLE OF CONTENTS 
SAFETY INSTRUCTIONS
INSTRUCTIONS SHELVING SYSTEM
INSTRUCTIONS WALL SAFETY BRACKET
INSTRUCTIONS FLOOR SAFETY BRACKET
INSTRUCTIONS WALL BRACKET SHELF  TRAY
GUIDELINE WALL MOUNTING
ACCESSORIES
INSTRUCTIONS WHEELS
INSTRUCTIONS BENCHTOP
INSTRUCTIONS BOOK DIVIDER
CARE AND MAINTENANCE
4
513
1418
1922
2326
27
2830
3133
3435
36

4
SHELVING SYSTEM
 NEW ORDER SAFETY INSTRUCTIONS 
SAFETY INSTRUCTIONS
FOR NEW ORDER
DRAWERS =
SAFETY BRACKETS
MAX WEIGHT
30 KG / PER LAYER DO NOT CLIMB
Trains, ships etc.
Airports, lobbies,
medical centres etc. Environments with children
Public places
ALWAYS USE SAFETY BRACKETS
IN THE FOLLOWING CASES
FREESTANDING
WITH FLOOR
SAFETY BRACKETS WITH WALL SAFETY BRACKETS
FREESTANDING
CONNECTED
MAX BUILDING HEIGHT

5
 INSTRUCTION MANUAL 
SHELVING SYSTEM

6

A Top shelves
150 cm
150 cm
150 cm

CBottom shelves

B Middle shelves
100 cm
100 cm
100 cm
34 cm
34 cm
34 cm
 PARTS 

7
 PARTS 
200 cm
100 cm
200 cm
200 cm
150 cm
150 cm
100 cm

D Top trays

E Middle trays

F Bottom trays

8

H Double profile

H Double profile
double height

G Single profile

G Single profile
double height

I Corner profile

ICorner profile
double height
 PARTS 

J Allen key

9
1.
Before starting assembly, use a spirit level to ensure the bottom shelves

C are level.
Adjust the feet if the bottom shelves need levelling by unscrewing the adjustable feet,
either by hand or with the Allen key

J from the top.

10
2.
Mount the profiles  G,

Hand

I on to the bottom shelves  C .
AVOID GAPS
Make sure that the profiles
are pressed firmly against
the shelf, leaving no gaps.
ALIGNMENT
Make sure that the fixed
screws are aligned with
the channel running
along the shelf.

11
3.
Add the middle shelves

Band the top shelves  A . . Then tighten all fixed screws in
both ends of the profiles with the Allen key

J . to secure the construction.
Then add the next layer of profiles.
TIGHTEN ALL FIXED SCREWS
Secure the construction by
tightening all fixed screws in
the first layer of profiles.

12
4.
Add the top tray

D and the top shelves

A . Then tighten all fixed screws in both
the top and bottom of the profiles.
TIGHTEN ALL FIXED SCREWS
Secure the construction by
tightening all fixed screws in the
second layer of profiles.

13
5.
Make sure all fixed screws are tightened.

14
WALL SAFETY BRACKET
- ACCESSORIES -  PARTS 

15

ABracket holder

CScrew

BBracket

DTorx key
 PARTS 

16
1.
Always mount wall panels and wall brackets under the top shelf.
Place the bracket holder

Ain the channel running along the shelf
and flip it down by following the steps 1, 2 and 3 below.
1
2
3

17
2.
Screw the bracket

Binto place using the screws

Cand torx key  D . Do not tighten
the screws completely. Mark the holes, and slide the bracket to the side and drill
holes in the wall. Fasten the bracket with the screws.
1 2
3 4

18
3.
Tighten the screws

Ccompletely.
 INSTRUCTION MANUAL 
FLOOR SAFETY BRACKET

19
 INSTRUCTION MANUAL 
FLOOR SAFETY BRACKET

20
1.
Make sure the shelf is level. Adjust the feet with the Allen key if needed.
Slide the brackets in from the sides and mark their position.
MARK THE POSITION
Mark the position of the brackets
on both sides.