Sterling Plumbing 71090115 User manual

Features
•Compression molded from our exclusive solid Vikrell
®
material
•Stainless steel grab bars 1-1/2″(3.8 cm) OD
•Tongue-and-groove 4-piece modular design allows for
easy ″snap together″installation
•Durable high-gloss finish
•Handicap seat mounts directly to back wall of bath
surround and rests on dam of bath
•10-year consumer/3-year commercial limited warranty
•Backwall bars: Two 33″(83.8 cm) long grab bars
Endwall bar: 24″(61 cm) long grab bar
•15″(38.1 cm) bath depth (floor to top of threshold)
•60-1/4″(153 cm) x 31-1/2″(80 cm) x 73-1/2″
(186.7 cm) complete unit rough-in dimensions include
flanges
•60″(152.4 cm) x 30″(76.2 cm) x 72″(182.9 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•ADA
•ASTM E162
•ASTM E662
•CSA B45.5/IAPMO Z124
•HUD, UM Bulletin 73A
•NAHB Research Foundation, Inc.
60″(152.4 cm) ADA COMPLIANT
BATH AND WALL SURROUND
71090115
ALSO 71090125
Colors/Finishes
•0: White
•Other: Refer to Price Book for additional colors/finishes
Specified Model
Model ADA Compliant Complete Unit Description Colors/Finishes
71090115 60″(152.4 cm) ADA compliant bath and wall surround, left drain ❑0❑Other_____
71090125 60″(152.4 cm) ADA compliant bath and wall surround, right drain (shown) ❑0❑Other_____
Model Component Description Colors/Finishes
71091114 60″(152.4 cm) bath only, left drain ❑0❑Other_____
71091124 60″(152.4 cm) bath only, right drain ❑0❑Other_____
Model ADA Adaptable Wall Component Description Colors/Finishes
71094103 Complete wall set, with grab bars ❑0❑Other_____
ACCLAIMTM
Page 1 of 2
1016222-4-H
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING

Technical Information
Fixture*:
Bathing well 42″(106.7 cm) x 16-1/4″(41.3 cm)
Top area 56″(142.2 cm) x 23-3/4″(60.3 cm)
To overflow:
Water depth 13″(33 cm)
Capacity 34 gal (128.7 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
71090115
71090125
58-1/2″(148.6 cm) 56-1/2″(143.5 cm)
Installation Notes
Install this product according to the installation guide.
To be ADA compliant, install according to the requirements of
the Americans with Disabilities Act (ADA). Use only ADA
compliant components.
Size the drain cutout to fit the drain assembly that will be
used.
Stud positioning is critical.
Studs should be positioned as shown.
Adjacent finished wall thickness must not exceed 9/16″
(1.4 cm).
4" (10.2 cm)
15" (38.1 cm)
60" (152.4 cm)
1-1/2" (3.8 cm)
30" (76.2 cm)
Drain Cutout
2-3/4" (7 cm)
Overflow Detail
33" (83.8 cm)
18" (45.7 cm)
30" (76.2 cm)
71090125
54"
(137.2 cm)
31-1/2"
(80 cm)
3"
(7.6 cm) 31-1/2"
(80 cm)
73-1/2"
(186.7 cm)
1-1/2"
(3.8 cm) 19"
(48.3 cm)
9"
(22.9 cm) 60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
3-1/2"
(8.9 cm) 8-3/4"
(22.2 cm)
2" (5.1 cm) D. Drain
14-1/4"
(36.2 cm)
6" (15.2 cm)
(Typical) 14"
(35.6 cm)
14"
(35.6 cm) 16" (40.6 cm)
8"
(20.3 cm)
8"
(20.3 cm) 22-1/4"
(56.5 cm)
Product Diagram
ACCLAIMTM
ACCLAIMTM 60″(152.4 cm) ADA COMPLIANT BATH AND WALL SURROUND
Page2of2
1016222-4-H