Sterling Plumbing 71140115 User manual

Features
•Compression molded from our exclusive solid Vikrell
®
material
•Handicap seat mounts directly to back wall of bath
surround and rests on apron
•Modular 4-piece design
•Pivot ″snap together″installation
•Stainless steel grab bars 1-1/2″(3.8 cm) OD
•Wall surround available with smooth finish or glazed
tile appearance
•Caulkless seam installation
•Not recommended as a bath only installation
•15″(38.1 cm) bath depth (floor to top of threshold)
•60-1/4″(153 cm) x 31-1/4″(79.4 cm) x 73-1/4″
(186.1 cm) complete unit rough-in dimensions include
flanges
•60″(152.4 cm) x 30″(76.2 cm) x 72″(182.9 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•ADA
•ANSI Z124.1.2
•ASTM E162
•ASTM E662
•ICC/ANSI A117.1
•CSA B45
60″(152.4 cm) ADA COMPLIANT
BATH AND WALL SURROUND
71140115
ALSO 71140125, 71240115, 71240125
Colors/Finishes
•0: White
•Other: Refer to Price Book for additional colors/finishes
Specified Model
Model ADA Compliant Complete Unit Description Colors/Finishes
71140115 60″(152.4 cm) ADA compliant bath and wall surround, tile wall, left drain ❑0❑Other_____
71140125 60″(152.4 cm) ADA compliant bath and wall surround, tile wall, right drain ❑0❑Other_____
71240115 60″(152.4 cm) ADA compliant bath and wall surround, smooth wall, left drain ❑0❑Other_____
71240125 60″(152.4 cm) ADA compliant bath and wall surround, smooth wall, right drain ❑0❑Other_____
ACCORD
®
Page 1 of 2
1065823-4-E
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING

Technical Information
Fixture*:
Basin area:
Bathing well 46-1/4″(117.5 cm) x 20-1/2″(52.1 cm)
Top area 52-1/4″(132.7 cm) x 22-1/2″(57.2 cm)
To overflow:
Water depth 11″(27.9 cm)
Capacity 34 gal (128.7 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
71140115
71140125
71240115
71240125
56-3/4″(144.1 cm) 56-1/2″(143.5 cm)
Installation Notes
Install this product according to the installation guide.
Product is designed to be used with a single-handle mixer
valve with an escutcheon cover not to exceed 7-3/4″(19.7
cm) in width.
To be ADA compliant, install according to the requirements of
the Americans with Disabilities Act (ADA). Use only ADA
compliant components.
Studs should be positioned roughly as shown.
Bath cannot be installed without the wall surround.
The width of the module gets 5/8″(1.6 cm) narrower at the
back. Furring strips (approximately 1/4″(6 mm)) should be
used at the back corner studs if drywall will overlap the nailing
flange.
30" (76.2 cm)
15-1/4"
(38.7 cm)
8"
(20.3 cm)
8"
(20.3 cm)
14" (35.6 cm)
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
4" (10.2 cm)
16" (40.6 cm)
Drain Cutout
60" (152.4 cm)
19"
(48.3 cm)
18" (45.7 cm)
55"
(139.7 cm)
58-1/2"
(148.6 cm)
40-1/2"
(102.9 cm)
4-1/4"
(10.8 cm)
1-1/4" (3.2 cm)
Overflow Detail
3-1/8" (7.9 cm)
3-1/2"
(8.9 cm)
2" (5.1 cm) D.
Drain
6" (15.2 cm)
(Typical)
31-1/4"
(79.4 cm)
10"
(25.4 cm)
22-1/4"
(56.5 cm)
59-3/8"
(150.8 cm)
31-1/4"
(79.4 cm)
30"
(76.2 cm)
73-1/4"
(186.1 cm)
15"
(38.1 cm)
12"
(30.5 cm)
36"
(91.4 cm)
Backer board
locations
Product Diagram
ACCORD
®
ACCORD
®
60″(152.4 cm) ADA COMPLIANT BATH AND WALL SURROUND
Page2of2
1065823-4-E