Sterling Plumbing C7576S User manual

Kitchen Exclusives™
Progression™
Single Control Kitchen Faucets
Models C757S, C7576S, C757CGS, C757GS
SPECIFICATIONS
8"
4" 8" REF.
10 ⁵⁄₁₆"
9 ¹⁄₁₆"
4"
8 ⁷⁄₁₆"7 ⁵⁄₈"
6 ⁹⁄₁₆"
10 ¹¹⁄₁₆"
4"
2 ¹⁄₄"
45˚ REF.
18"
FEATURES
■Input
Min. - Max. / 20 - 80 psi
Max. Allowable 125 psi
■Flow Rate
2.2 gpm at 60 psi
■Installation
EZ Install™ mounting system
(patent pending)
■Supply Lines
Pre-installed flexible supply lines
with stainless steel housing
■Connectors
3/8" Compression
■Valve Type
Ceramic washerless cartridge
■Standards and Ratings
Meets or exceeds the requirements
of the following standards: ASME
A112.18.1M, ANSI 117.1, ADA
"Americans with Disabilities Act"
■Warranty
Limited Lifetime
PRODUCT OVERVIEW
Single Control Kitchen with Spray
Lever handle
Compatible with 4 sink holes
(Minimum 1-1/8" dia. In-line, 4" centers)
C757S — Chrome plated, 18" supply
lines, with side spray, styled lever handle,
single pack
C7576S — Chrome plated, 18" supply
lines, with side spray, styled lever handle,
trak pak
C757CGS— Chrome/Endurable™
Lifetime Polished Brass finish accents,
18" supply lines, with side spray, styled
lever handle, single pack
C757GS —Endurable™ Lifetime Polished
Brass finish, 18" supply lines, with side
spray, styled lever handle, single pack
3.0
2.5
2.0
1.5
1.0
0.5
0.0 0.0 10 20 30 40 50 60 70 80
LINE PRESSURE P.S.I. GAUGE
FLOWRATE (GPM)
© 2001 Sterling Plumbing, 444 Highland Drive, Kohler, WI 53044 1-888-STERLING
Pub. No. 99175 01/02 www.sterlingplumbing.com Printed in U.S.A.
★Made in U.S.A.
¹³⁄₁₆"
2 ⁹⁄₁₆"1 ¹⁄₈"
3 ¹⁄₂"
4 ⁵⁄₈"
1 ⁵⁄₈"
Fixture dimensions are nominal and conform to tolerances established by ANSI Standards, Z124.1.