Still Easy Control User manual

12,6 h
10:35
Display/control unit
STILL Easy Control
Original instructions
56378012101 EN - 10/2019

1 Introduction
STILL Easy Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2 Description of the display-operating unit
Main display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Overview of the main display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Status bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Keypad assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Softkeys on the right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Softkeys on the left . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Control and input keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Display area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3 Function menus
Function menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Operating the function menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4 Favourites
Favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Operating favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
5 Configure favourites
Configure favourites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Grouping favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Favourites overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
6 Settings menu
Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Truck information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Display settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Table of contents
I56378012101 EN - 10/2019

Truck settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Diagnostics/service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Access authorisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
7 Messages
Message types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Message list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Messages about the industrial truck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Messages about operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Table of contents
II 56378012101 EN - 10/2019

1
Introduction

STILL Easy Control
STILL Easy Control is a third-generation dis-
play-operating unit for industrial trucks.
It serves as an operating device for additional
functions. STILL Easy Control allows opera-
tion of the usual functions of the industrial
truck, such as switching on the windscreen
wiper function, configuring the driving dynam-
ics or operating the lights.
It also shows information about the status of
the industrial truck, such as the state of bat-
tery charge, error messages and operating
hours.
The configurable favourite functions allow op-
eration of the industrial truck to be adjusted to
the individual preferences of the driver. Addi-
tional assistance systems also facilitate opera-
tion and lead to greater safety and satisfaction
in daily work.

Introduction
1
STILL Easy Control
2 56378012101 EN - 10/2019

2
Description of the display-operating unit

Main display
After switching on the industrial truck using the
key switch, the industrial truck is ready for op-
eration. The main display appears on the dis-
play.
NOTE
Depending on the configuration of the industri-
al truck, you may have to enter the PIN code
first.
12,6 h
10:35

Overview of the main display
12,6 h
10:35
A
C
D B
Status bar
Right-hand favourites bar / menu bar
A
BDisplay area Left-hand favourites bar
C
D
Description of the display-operating unit
2
Main display
4 56378012101 EN - 10/2019

Status bar
NOTE
The symbols and values shown in the status
bar are examples.
The status bar provides the driver with infor-
mation relevant to the truck, such as the bat-
tery charging status, daily operating hours and
the time, similarly to an on-board computer.
The status bar is divided into three fields, each
of which can be configured individually:
1 Left field
2 Centre field
3 Right field
For more information, see the chapter entitled
"Setting the status bar".
The following table gives an overview of possi-
ble information and values available for the
display area of the status bar.
Description of the display Display format Symbol
Filling level Graphical
%
Range h
Operating hours h
Daily operating hours h
Distance km
mi
Daily distance km
mi
Time
hh:mm
hh:mm am
hh:mm pm
Date dd.mm.yy
mm/dd/yy
Next maintenance interval h
Current consumption kW
Average consumption kW
Special features
In the event of a message, the symbol is
always displayed in the left-hand field of the
09:35
2
123
432 h

Description of the display-operating unit
2
Status bar
556378012101 EN - 10/2019

status bar. For more information, see the
chapter entitled "Messages".
Keypad assignment
12,6 h 10:35
BA
C
Softkeys on the left
Softkeys on the right
A
BControl and enter keysC
Description of the display-operating unit
2
Keypad assignment
6 56378012101 EN - 10/2019

Softkeys on the right
Five Softkeys (A) are arranged on the right-
hand side of the display.
These softkeys always relate directly to the
functions shown on the display.
You push a Softkey to execute the respective
function.
In addition to switching functions on and off,
the Softkeys can also be used to navigate
within the menu structure and to select ac-
tions.
Softkeys on the left
On the left-hand display page, there are five
Softkeys (A).
These softkeys always relate directly to the
functions shown on the display.
You push a Softkey to execute the respective
function.
12,6 h 10:35
A

12,6 h 10:35
A

Description of the display-operating unit
2
Softkeys on the right
756378012101 EN - 10/2019

Control and input keys
12,6 h 10:35
43 2
1
Menu button
Scroll button
1
2Back button
Main-display button
3
4
The control and input keys on the display-op-
erating unit are used to enter control and input
commands.
Menu button
Button (1) opens the first level of the menu.
If the driver is a lower navigation level, press-
ing the button will return to the top menu
level.
In the settings menus, the button is used
to save the input.
Description of the display-operating unit
2
Control and input keys
8 56378012101 EN - 10/2019

Scroll button
The "scroll" button (3) can be used to
scroll up and down within a menu level (1,2).
Press the right-hand button to scroll up.
Press the left-hand button to scroll down.
The button is used to delete input in the
settings menus.
The button is for switching between upper
and lower case for alphanumeric entries.
Back button
If the button is pressed, the display
changes to the next menu level up.
The button is used to abort input in the set-
tings menus.
Main-display button
The button returns directly to the main dis-
play regardless of the current menu level.
NOTE
The specific functions of the control and input
keys are explained in the corresponding chap-
ters.
2
3
1

Description of the display-operating unit
2
Control and input keys
956378012101 EN - 10/2019

Display area
432 h 08:20
1,6 t
2,71 m
7,0°
4
21
5
6
8910 711
12
13
14
3
12 km/h
Power mode
Bar display for the Dynamic Load Control 2
Load information
Load programme display
Load dynamics display
Load handling assistant
"Forward" drive direction indicator
1
2
3
4
5
6
7
"Right" turn indicator display
Speed indicator
"Left" turn indicator display
"Reverse" drive direction indicator
Steering angle display
Driving dynamics display
Drive programme display
8
9
10
11
12
13
14
The display of the display-operating unit
shows control commands and input com-
mands, as well as information about the active
drive programmes and load programmes.
The assignment shown here is an example
and may differ from the assignment actually
programmed. Buttons may be assigned multi-
ple functions that are called up according to
the menu navigation. For more information,
see the chapter entitled "Favourites".
●
If you have any questions, contact your au-
thorised service centre.
Description of the display-operating unit
2
Display area
10 56378012101 EN - 10/2019

NOTE
The individual displays and display areas are
explained briefly below. More detailed infor-
mation can be found in these operating in-
structions and in the operating instructions for
the industrial truck.
Power mode
Display of the active power mode:
●
Blue-Q
●
Sprint mode
●
STILL-Classic
NOTE
STILL-Classic is automatically active if no oth-
er power mode has been selected. No picto-
gram is displayed for STILL-Classic.
Bar display of the Dynamic Load Con-
trol 2
The bar display on the display-operating unit
is part of the load information. It is part of the
Dynamic Load Control 2. See the chapter enti-
tled "Dynamic Load Control 2" in the original
operating instructions for the truck.
If a sensor belonging to the Dynamic Load
Control 2 fails, the level of intervention from
the function is increased to the maximum. A
cross appears instead of the bar.
–If this display appears permanently, contact
the authorised service centre.
Load information
The following load information is shown (from
top to bottom):
●
Load weight
●
Tilt angle of the lift mast
●
Lift height
1



1,6 t
2,71 m
7,0°

Description of the display-operating unit
2
Display area
1156378012101 EN - 10/2019

Load programme display
The pictogram shows the selected load pro-
gramme.
Load dynamics display
The load dynamics display shows the lifting
speed of the load programme.
●
One bar: slower lifting speed
●
Three bars: faster lifting speed
Displays for different variants
Different load-dependent and lift height-de-
pendent functions are available as variants.
These functions have their own display var-
iants in the display-operating unit.
–For more information on these variants, see
the original operating instructions for the
truck.
"Forwards" / "backwards" drive direction
indicators
The drive direction indicators show the selec-
ted drive direction for "forwards" or "back-
wards". You select the drive direction via the
drive direction switch on the industrial truck.
If no drive direction is selected, the arrows on
the drive direction indicator show no colour.
When you select the "forwards" drive direc-
tion, the "forwards" drive direction indicator is
orange.
4

5

7
11

7

Description of the display-operating unit
2
Display area
12 56378012101 EN - 10/2019

When you select the "backwards" drive direc-
tion, the "backwards" drive direction indicator
is orange.
"Right" and "left" turn indicator display
The "right" or "left" turn indicator display flash-
es as soon as the turn indicator for the corre-
sponding direction is activated.
Speed indicator
The speed indicator displays the driving speed
of the industrial truck in numbers.
Steering angle display
The steering angle display is represented by a
rotating arrow on the circumference of the cir-
cle and shows the position of the steering
axle.
Driving dynamics display
Using individual bars, the driving dynamics
display shows the acceleration dynamics and
deceleration dynamics of the drive programme
selected.
●
One bar: slower acceleration and decelera-
tion
●
Three bars: faster acceleration and deceler-
ation
11

12 km/h
10 8

12 km/h
9

12

13

Description of the display-operating unit
2
Display area
1356378012101 EN - 10/2019

Drive programme display
The pictogram shows the selected drive pro-
gramme.
14

Description of the display-operating unit
2
Display area
14 56378012101 EN - 10/2019

3
Function menus

Function menus
The function menus allow the driver to access
all working functions and driving functions of
the industrial truck. These functions represent
a group of sub-menus that can be accessed
via the "menu".
In addition to the "function menus", the driver
can access frequently used functions via the
"favourites". For more information about the
favourites and how to configure them, see the
chapters entitled "Favourites" and "Configure
favourites".
Arrangement
The "menu" is divided into the following sub-
menus:
●
"Driving"
●
"Light"
●
"Windscreen cleaning"
●
"Load"
●
"Settings"
NOTE
The "Settings" sub-menu does not belong to
the function menus as it contains the configu-
ration options for the display-operating unit
and the industrial truck. For more information
about the settings menus, refer to the chapter
entitled "Settings".
Overview
NOTE
Some functions are only available for specific
industrial trucks.
The following table shows an overview of the
menu items at the individual menu levels.
Menu level 1 Menu level 2 Menu level 3 Menu level 4
Driving Power modes Blue-Q
Sprint
STILL Classic
12 km/h
432 h
08:20
1,6 t
2,71 m
7,0°

Function menus
3
Function menus
16 56378012101 EN - 10/2019