Stiltz Trio+ Homelift User manual

Stiltz Trio+Homelift
User Manual
www.sltz.co.uk

Introduction.............................................................. 3
Important Information Prior to Initial Operation ..... 4
Components ............................................................. 5
Li Components
Car Operang Panel, Remote Control
Safety Features......................................................... 7
Safety Sensors in the Li Car Roof and Li Car Floor
Locking Mechanism, Light Curtain
Addional Safety Sensors
Emergency Features
Safety Brake, Motor and Gear Brake
Emergency Power Supply
Lift Operation .......................................................... 10
Using the Li from Inside the Car
Calling the Li with the Remote Control
Troubleshooting ...................................................... 11
Supplementary Information ................................... 12
Declaration of Conformity ...................................... 13

Thank you for purchasing the Sltz Trio+ Homeli. We are condent that this li will make your
life easier, safer and more comfortable. The Sltz Trio+ Homeli is a Domesc Personal Homeli
that complies with Machinery Direcve 2006/42/EC. To ensure connued sasfacon with your
Sltz Trio+, please always follow these instrucons:
• Read this user manual carefully before using your Sltz Trio+ Homeli. This will help ensure
safe, easy and correct operaon of the li.
• In the event of malfuncon, please refer to the chapter “Troubleshoong” rst. Potenal
failure may be caused by the li's safety devices. It is very likely that you can correct these
issues quickly and easily yourself. We are happy to provide phone support if needed. To get
in touch with us, please call our freephone customer service number on 0330 222 0334.
• Even a solidly-built and technically low-maintenance li such as the Sltz Trio+Homeli
should be maintained on a regular basis; once a year is ideal. This maintenance ensures
connued safety, and increases the long-term reliability of the li.
• Maintenance of your li is even easier if you sign up for a regular warranty agreement to
extend the life of your Sltz Trio+. This is oponal, however we do recommend it in order to
keep your li in opmal condion.
• We strongly recommend that you have all service and maintenance work to your Sltz
Trio+, carried out by an authorised Sltz service technician.
• You should never use the li in the event of a re.
We hope you'll enjoy your new Sltz Trio+ Homeli.
Introducon
Introducon | Sltz Trio+ Homeli

1. The li is motorised with moving parts. Only those who have been shown how to
operate it and who understand that they are responsible for starng, travelling in
and stopping the li safely - and have been cauoned on the potenal hazards -
should operate it.
2. The li is not a toy. Children under 14 years old should not be permied to
play with, or inside, the li. Children should only operate the li if under adult
supervision and only use it for its intended purpose.
3. Much like a stair case, this li can pose a parcular risk to small children when
on the upper oor, without adult supervision. In parcular, when the li is called
from the lower oor while a small child is on the upper oor, the child could
potenally crawl into the parally lowered li (if the li has the half door opon
ed). The safety light barriers stop the li ride as soon as there is an obstrucon
detected in the entrance area. However, that system does not protect a child from
potenally falling into the parally lowered li. It is the user’s responsibility to
ensure that such a situaon does not occur.
Important Informaon
Prior to Operaon
The Sltz Trio+ Homeli has been equipped with a number of safety and emergency
features to ensure safe usage at all mes. Nevertheless, it is essenal that the li is
operated in accordance with the user manual to ensure that no accidents occur.

Li Components
Components
1
Cover Panel for electrics
and hoist unit
2 LED Lights
3 Car Operang Panel (C.O.P.)
4 Guide Rails
5 Seat (not shown)
6 Li Car Floor with
safety sensors
7 Locking Mechanism
8 Door
9 Safety Handle
(not shown)
10 Li Car Roof with
safety sensors
11 Floor Lid
Important Informaon Prior to Operaon and Li Components | Sltz Trio+ Homeli
3
2
1
10
11
4
9
5
7
8
6

E
M
E
R
G
E
N
C
Y
S
T
O
P
E
M
E
R
G
E
N
C
Y
S
T
O
P
Car Operang Panel
Emergency stop buon
Down
Up
Middle level
Up
Down
On and O key
C.O.P. Inside the Li Car
LED display lights on the Car Operang Panel
Remote Control
The door is not closed
Normal operaon,
the li is ready to go
No power
There is an obstrucon in
the light curtain area
The sensors in the cabin oor
signal an obstrucon
The sensors in the cabin
roof signal an obstrucon
The permissible maximum
weight limit has been exceeded
Emergency stop has
been acvated

Car Operang Panel and Safety Features | Sltz Trio+ Homeli
Safety Features
The numerous safety features have been designed to ensure safe and comfortable li
travel at all mes. They prevent - or stop - the li from moving in case of a malfuncon
or in the event of an object or person blocking the operang radius.
In order to guarantee this and to protect the li against potenal failure, all safety
features must be acvated before operang the li.
It is important that you are familiar with all safety features.
Safety Sensors in
Li Car Roof and Car Floor
There are safety sensors in the Li Car oor
and Li Car roof which will stop the li
immediately if it comes into contact with
any obstacle. The li can then only proceed
in the opposite direcon. The journey can
be connued as soon as the obstrucon has
been cleared.
Locking Mechanism
and Light Curtain
The door's locking mechanism ensures that
the Li Car door stays closed while the li is
moving. Sensors check - even before moving
- whether the door has been closed. A key
for the li door is provided to open the
safety catch and let passengers exit in an
emergency situaon.
All lis are equipped with a light curtain.
This safety light curtain creates a barrier
across the entrance of the li and either
prevents, or stops, the li from moving
further if there is an obstrucon blocking
the safety light curtain. To nofy the user
that the safety light curtain is obstructed,
a white warning light will be illuminated
on the control panel inside the cabin.
For illustraon purposes only,
Duo+ model shown

Addional Safety Sensors
Balance sensors will stop the Li Car if a
problem exists with either of the li ropes.
Overload sensors will determine whether
the li is overloaded prior to moving. To
nofy the user that the li is overloaded,
the related area on the control panel inside
the cabin will ash. (See page 6).
The Slack Rope sensor detects if the li
ropes are slack and will prevent the li car
from aempng to travel any further.
In the unlikely event that the regular limit
switches should fail, there are auxiliary
switches located above and beneath the Li
Car. If these should fail at the same me,
there are further back up switches that will
stop the li in an emergency. Once these
emergency stops are acvated, the li will
stop unl the incident has been invesgated
by a service technician, and the problem has
been corrected.
Emergency Features
The li is equipped with an emergency stop
buon. Pressing the red emergency stop
buon whilst travelling in the li will stop
the li immediately and trigger the alarm.
Therefore, this buon should only be used
in extreme situaons; such as the li failing
to stop when the control buon is released.
The emergency system must be reset once
the cause of the incident has been resolved.
A key switch prevents operaon while the
li is in “o” mode. This switch also resets
the controls aer an emergency stop.

Safety Features | Sltz Trio+ Homeli
There is a phone handset located
underneath the control, panel inside the
cabin, which will enable immediate contact
in case of emergency.
Safety Brake, Motor
and Gear Brake
In the event of any rope related issues, an
integrated brake system will stop the li. The
safety brake stops the li immediately, in the
unlikely event of a hoist rope failure. If any of
these safety features are acvated, they must
be disengaged and reset by a Sltz Homeli
service technician.
Emergency Power Supply
In the event of a power failure occurring whilst
the li is in operaon, the emergency power
supply and emergency lights will acvate
automacally. The li can be moved down to
the lower oor on emergency power by using
the normal li controls. If this happens, the
buon which moves the li to the upper oor
will be disabled. All safety features remain
fully operaonal while lowering the li on
emergency power.
To ensure that the emergency power supply
is charged at all mes, the li's power plug
should never be disconnected from the mains.
Phone model may vary.

Li Operaon
Using the Li from Inside
the Car
1. When entering the li, the lights come on
automacally. Stand (or sit) in the li facing
the opening.
2. Close the door and make sure that you
are not obstrucng the safety light curtain
across the li entrance. If obstructed, the
li will not travel and a buzzing sound will
indicate connued obstrucon of the safety
light curtain. If you are in the entrance area,
there will also be a white light illuminated
indicang a light curtain obstrucon.
3. If the load is greater than specied for
this li (250kg) the overload light will be
illuminated. The li will not move unl the
weight is reduced.
4. Ensure any passengers or items travelling
with you are fully contained within the li
ca r.
5. Select the desired direction (see image of
control panel on page 6). Depress and hold
the appropriate button for travelling up or
down. The lift will move while the button is
depressed.
6. Hold the buon down unl the li stops
at its desnaon.
7. If you see an unsafe situaon, release
the buon and either wait unl it is safe to
connue or return to the oor from which
you came.
Calling the Li using the
Remote Control
You can posion the two remote controls
anywhere around your home and these
allow you to control the li, and to call it
when it's parked on the other level. The
remote control can be used to move the li
to the desired oor.
1. If possible, rst check to make sure that
nobody is inside the li trying to operate it
from within.
2. Press the call buon on the remote
control and keep it pressed unl the li has
come to a stop on the desired oor. Please
note: you can stop the li at any me by
releasing the buon.
3. If the li encounters obstrucon when
being called either up or down, it will stop.
If this occurs, reverse the direcon the li
is travelling in and return it to the starng
point. Clear the obstrucon, and as soon
as the obstacle has been removed from
the operaon area, the li will connue its
journey.

Li Operaon and Troubleshoong | Sltz Trio+ Homeli
Problem Possible cause Solution
The li will not operate The light barrier protecng
the car entrance is obstructed.
The barrier light is illuminated
and a buzzing sound is heard
Remove the obstrucon
The key switch is o. Door
open. Light curtain and
normal operaon light will
ash alternately
Turn it back on with the key
The emergency stop buon
has been pressed. Door open
and emergency stop lights
ash alternately
If a raised buon has been
ed turn clockwise unl the
buon pops out. Carry out a
key reset. If a ush stop buon
is ed, carry out key reset
The power is o. The le hand
side yellow display light is on.
Wait unl the main power is
restored OR switch it back on
at the fuse switch
Someone has tried to
manually move the li car
Contact Sltz. The li
mechanism may be displaced
The door is not completely
closed, door light will be on
Close the door
The remote controls won't
operate the li
Remote control baeries may
need replacing
Replace the baeries
The li car will not travel
downwards, only upwards
There is an obstrucon under
the li car
Remove the obstrucon
The li car will not travel
upwards, only downwards
Main power is o and li car
is operang on emergency
baery
Wait unl the main power is
restored
There is an obstrucon on the
safety cover
Remove the obstrucon
The safety cover could be
catching on the guides etc.,
as it is being lied
Safely observe from the upper
oor whether cover is lng
instead of coming up level
Troubleshoong
If the li remains inoperable aer following all instrucons, use the key switch to turn the li o and
then back on. The control unit will then perform a check of all the electrical circuits and reset them if
necessary. This is usually all that is required to reset the li and restore normal operaon.
Note - if the li is plugged into an RCD socket the li may also need a push buon reset (if li has a
raised buon), prior to being operable.
If the li will not operate correctly aer reseng with the key, please contact a service technician.

Supplementary Informaon
WARNING To ensure that the emergency power within the li is charged at all mes, the power
plug of the Sltz Trio+ Homeli should never be disconnected from the mains supply.
Intended use The Sltz Homeli is authorised for the exclusive purpose of
transporng the intended individuals only
Installaon/Repair/
Disassembly
All installaon/disassembly and service work must be carried out by
an authorised Sltz service technician
Cauon • For safety reasons, the removal or modicaon of any parts or
components of the Sltz Homeli is prohibited
• Do not use the Sltz Homeli in the event of re
Environment • The ambient operaonal temperature should not fall below 5°C
• Do not operate your Sltz Homeli in a potenally explosive
environment
• The Sltz Trio+ Homeli is designed for indoor use only
Emergency Telephone • In case of an emergency, please always call the freephone Sltz
Homeli number for assistance rst
• The number is 0330 222 0334

Supplementary Informaon and Declaraon of Conformity | Sltz Trio+ Homeli
Declaraon of Conformity
Declaration of Conformity
EC DECLARATION OF CONFORMITY FOR MACHINERY
G. M. Welch
Head of Engineering
Manufacturer: Sltz Limited
Building 5, Bay 1, First Avenue
Pensne Estate, Kingswinford
West Midlands, DY6 7TE
Date
Herewith declares that the Sltz Homeli range conforms with:
Machinery Direcve 2006/42/EC
Low Voltage Direcve 2014/35/EU
Electromagnec Compability Direcve 2004/108/EEC
and that homelis can be ordered specically to comply with
BS EN 81-41:2010
Sltz Homelis are machines comprising a car which travels vercally between two guide rails.
The homeli travels between designated oors through an aperture created in the home. The
Duo and Trio Homelis can serve oors (up to 4.5m apart) with either a single car entry point
or a double entry through-car conguraon. The Duo and Trio Homelis are non-automac
lis, meaning that the user must use constant pressure to control the li at all mes. The Duo
Homeli has a rated capacity of 170kg; the Trio Homeli has a rated load capacity of 250kg.
Sltz Homelis are sold under the brands: Lion Duo Lion Trio
Duo+ Trio+
Technical construcon les are available for the Sltz Duo and Trio Homelis. They are
compiled and maintained by the Head of Engineering at the above address. The Sltz Homelis
have been examined and cered by Liinstuut BV, Noed Body number 0400, located at
Buikslotermeerplein 382, P.O. box 36027, 1020 MA Amsterdam Netherlands. Cercate number
NL17-400-1001-195-01.
The unique serial number of your li:

,,
We hope that you enjoy
your new Sltz Trio+ Homeli


Committed to providing stylish
and accessible living for all
Head Office
Building 5, Bay 1
First Avenue
Pensnett Estate
Kingswinford
DY6 7TE
Southern Office
Unit 13, Anglo Trade Park
Fishponds Road
Wokingham
Berkshire
RG41 2AN
Northern Office
4, The Courtyard Building
Thorpe Lane
Guiseley, Leeds
West Yorkshire
LS20 8LG
This manual suits for next models
1
Table of contents
Popular Lifting System manuals by other brands

Rothewald
Rothewald 10059174 Assembly and operating instructions

Challenger Lifts
Challenger Lifts 40200 Operation installation maintenance manual

twin busch
twin busch TW M-02 Installation, operation and maintanance

Audipack
Audipack FFCL-8590 installation manual

Autoquip
Autoquip 830PKG Installation, operation and service manual

global lift corp
global lift corp COMMERCIAL Series installation manual