stilum gravis 1B Technical specifications

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 30.11.2018 p. 1
Mounting instructions for multiplay equipment „gravis 1B“
Item-No. 51 5519 402
Diagram 1: Overall view of play equipment with description of individual elements
tower
climbing net
frame
slide
climbing balls

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 30.11.2018 p. 2
Mounting instructions for multiplay equipment „gravis 1B“
Item-No. 51 5519 402
1. Select the play equipment location in consideration of the required safety
area (see Diagram 3: 7700 x 5800mm).
2. Carry out excavation work for foundations as shown in Diagram 3. After exca-
vation, compress the foundation oor.
Note: The combination equipment is built in on the play level. Pay attention
to items marked „game level” of play equipment!
3. Set up the main foundation (like a C, see diagram 3), the foundation for the
slide (LxBxH 800 x 600 x 400mm) and the two foundations (LxBxH 600 x 600
x 400mm) acc. to the dimensions indicated in diagram 3 with central, horizon-
tal reinforcement.
4. After a setting period of 10-14 days, depending on weather conditions and
foundation size - clean the surface of the foundations and start with the instal-
lation of the combination equipment.
5. Connect the platforms as described in diagram 1, 4a and 4b at the indicated
positions with the frame and x it with the in the delivery included screws.
Reinforcement plan:
Concrete foundation with reinforcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C 20/25
Diagram 2: Rear view with dimension details
Diagram 3: safety zone
2000
R
1000
5800
R
1500
R
1000
1560
7700
1537
1541
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
gravis 1B
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:50
A3
Gewicht
Name
Name
Draufsicht
1003-00-00
362.9 Maßstab
Schramm 10.04.18
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 30.11.2018 p. 3
Mounting instructions for multiplay equipment „gravis 1B“
Item-No. 51 5519 402
Diagram 3: top view with position of the foundations „gravis 1B“
450
400
4746
1445
4172
3311
AA
600
800
600
600
1268
749
1559
740
2519
282
1003
706 554
773
926
1823
318
479
899
1049
1338
1649
A-A
3472
450
2744
Erde/Grund
Ground
Füllmaterial
Filling
Beton
Concrete
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
gravis 1B
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:40
A3
Gewicht
Name
Name
Fundamentplan
1003-00-00
363.4 Maßstab
Mattheis
31.10.16
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
450
400
4746
1445
4172
3311
AA
600
800
600
600
1268
749
1559
740
2519
282
1003
706 554
773
926
1823
318
479
899
1049
1338
1649
A-A
3472
450
2744
Erde/Grund
Ground
Füllmaterial
Filling
Beton
Concrete
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
gravis 1B
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:40
A3
Gewicht
Name
Name
Fundamentplan
1003-00-00
363.4 Maßstab
Mattheis
31.10.16
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 30.11.2018 p. 4
Mounting instructions for multiplay equipment „gravis 1B“
Item-No. 51 5519 402
Diagram 4a: connection part „platform“
Anbindung Turm
Rev.:
Projekt:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
0133-01-00
29.04.2015
Abmaße:
Fertigung:
x
x
Gewicht:
35723.4
Gravis2
Diagram 4b: frame
connection tower
connection frame
6. The base frames of the towers have to be positioned on the foundations as
shown in diagram 1 and 3.
Note: Do not screw the base plates onto the foundations yet!
7. Connect the slide with the tower at the intended locations and fasten it with
the screws included (diagram 5).
8. Connect the climbing balls with the adapter and screw it as shown on dia-
gram 5 (screws included in the delivery).
9. Connect the climbing net with the tower at the intended locations acc. to the
Diagram 1 and 5 and place the at steel on top of the foundation, using the
shackles including in the delivery.
10. Align the play equipment once more on the foundations.
Note: The climbing net should be placed with tension to avoid droop.
11. Drill holes into all foundations and screw the play equipment into the founda-
tions with the included heavy-duty dowels.
12. Fill up and compress the holes between the foundation and the foundation
hole with the excavation.
13. Seal the foundation with the safety cover required for the height of fall
indicated.
Critical drop height: 1500 mm.
Recommended surface material: sand, wood chip, gravel, synth. fall protec-
tion.
14. Do not allow children to use the equipment before the installation has been
nished.
15. After 3 months, check the screws at the joints and retighten them if
necessary.

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 30.11.2018 p. 5
Mounting instructions for multiplay equipment „gravis 1B“
Item-No. 51 5519 402
Diagram 5: connecting parts
ap climbing net
Blatt:
Projekt:
Artikelnummer:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ :
DATUM:
NAME:
WERKSTOFF

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
1
0175-02-00
4083x2563x3752
Fertigung:
x
x
Gewicht:
10562941.33
Gravis Multiplay
Zust. Änderung Name
Abmaße:
Zuschnitt:
x
Datum
x
tube adapter
climbing balls
Blatt:
Projekt:
Artikelnummer:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ :
DATUM:
NAME:
WERKSTOFF

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
1
0175-02-00
4083x2563x3752
Fertigung:
x
x
Gewicht:
10562941.33
Gravis Multiplay
Zust. Änderung Name
Abmaße:
Zuschnitt:
x
Datum
x
connection for the slide

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 30.11.2018 p. 6
Mounting instructions for multiplay equipment „gravis 1B“
Item-No. 51 5519 402
In order to preserve a good visual appearance of your stilum playground equipment
over a long period one should take care of maintenance of the stainless
surface even despite of their corrosion resistance. Especially areas, which can not
be reached by rainfall, should be frequently cleaned from dirt and deposits due to air
pollution and dirt caused by the atmosphere. Light soiling can easily be removed by
using a high pressure cleaner. For persistent deposits use a clean cloth moistened
with a special liquid cleaner (e.g. on phosphoric acid) and rinse off with clear water
after a short application time. During cleaning with mild abrasive components, only
wipe over stainless steel surface in polishing direction. For heavily soiled surfaces,
polishes can be used (e.g. for cleaning chrome on cars) or for greasy and oily dirt
alcoholic cleaning agents and solvents (e.g. ethyl alcohol, isopropyl alcohol or ace-
tone). However, it should be noted that the dissolved soiling is not spread over the
surface again. Do not use any chloride or hydrochloric containing cleaning products
nor scouring powder, bleaching - or silver polish cleaner. Cleaning intervals depend
on type and degree of soiling as well as on demands made on optical characteris-
tics. Therefore cleaning is advisable at intervals of six to twelve months – whereby in
the case of strong soiling it is appropriate to clean the playground equipment at inter-
vals of 3 to 6 months.
Attention: If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to
particular risks of injury for the user. For this reason, make clearly visible that the
equipment shall not be used in such cases.
NOTE: Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may rub
off and leave small steel particles in combination with moisture brown rust stains.
If such corrosion occur on stainless steel parts, they are ne to remove with an
abrasive (240 grit).
Please take care when transporting and setting up the fact that the components
are made of stainless steel with no „normal“ steel parts in contact.