stilum ramus User manual

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modi cations reserved. State: 11/2012 · S. 1
Mounting instructions for climbing equipment „ramus“
Item No. 515513401
Diagram 1: Overall view of the play equipment

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modi cations reserved. State: 11/2012 · S. 2
Mounting instructions for climbing equipment „ramus“
Item No. 515513401
1. Select the play equipment location in consideration of the required safety
area (see Diagram 3: Ø 6250 mm).
2. Carry out excavation work for the foundation anchor as shown in Diagram 2.
After excavation, compress the foundation oor.
Note: The climbing equipment is built in on the play level. Pay attention to
items marked „game level“ of play equipment!
3. Concrete foundation acc. the specied dimensions (800mm x 800mm x
400mm) build with centrally mounted, horizontal reinforcement. It shed the
supplied anchor bolts with the foundation that the upper angle frame is hori-
zontal and ush with the foundation surface.
4. After a setting period of 10 – 14 days, depending on weather conditions and
foundation size, clean the surface of the foundation and put the preassem-
bled playequipment on the foundation anchor and screw it.
Reinforcement plan: Concrete foundation with rein-
forcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h = 3 cm
Concrete quality class C20/25
Diagram 2: Side view with dimension details „ramus“
400 450
480
800
1870 freie Fallhöhe
2600
600
600
1342
600
600
600
600
Rohr Ø42,4 x 3,25
Bodenplatte 480 x 480 x 12
Bodenanker Ø16
Rohr Ø101,6 x 3,65
Stütze 100 x 100 x 10
100°
100°
100°
ZG-NR:
BENENNUNG:
KUNDE:
DIN ISO 1302 REIHE 2
+0,3
GEPR:
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
-0,3
ZUL. ABWEICHUNG
30.05.2011
BESTELL-NR:
DATUM:
DIN 2768 - mH
Kletterbaum D1342
1:20
NACH DIN 6784
WERKSTUECKKANTEN
WERKSTOFF / ROHMAß:
A3
GEZ:
56271 Kleinmaischeid
Gewerbegebiet Larsheck
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
V. Bishop
Deutschland
OBERFLAECHEN NACH
MAßSTAB:
NAME:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
FREIG:
Kennzeichnung
Einbautiefe
Erde
Ground Beton
Concrete
Füllmaterial
Filling
Äste spiralförmig angeordnet
Drehung 100°
senkrechter Abstand 150
400 450
480
800
1870 freie Fallhöhe
2600
600
600
1342
600
600
600
600
Rohr Ø42,4 x 3,25
Bodenplatte 480 x 480 x 12
Bodenanker Ø16
Rohr Ø101,6 x 3,65
Stütze 100 x 100 x 10
100°
100°
100°
ZG-NR:
BENENNUNG:
KUNDE:
DIN ISO 1302 REIHE 2
+0,3
GEPR:
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
-0,3
ZUL. ABWEICHUNG
30.05.2011
BESTELL-NR:
DATUM:
DIN 2768 - mH
Kletterbaum D1342
1:20
NACH DIN 6784
WERKSTUECKKANTEN
WERKSTOFF / ROHMAß:
A3
GEZ:
56271 Kleinmaischeid
Gewerbegebiet Larsheck
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
V. Bishop
Deutschland
OBERFLAECHEN NACH
MAßSTAB:
NAME:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
FREIG:
Kennzeichnung
Einbautiefe
Erde
Ground Beton
Concrete
Füllmaterial
Filling
Äste spiralförmig angeordnet
Drehung 100°
senkrechter Abstand 150

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modi cations reserved. State: 11/2012 · S. 3
Mounting instructions for climbing equipment „ramus“
Item No. 515513401
5. Existing gaps between the foundation and foundation hole lled up with exca-
vated soil and compact.
6. Seal the foundation with the safety cover required for the height of fall indica-
ted.
Free fall height: capprox.1.870 mm
Recommended surface material: sand, bark mulch, gravel, wood chip, synth.
fall protection.
7. Do not allow children to use the equipment before the installation has been
nished.
Attention: If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to par-
ticular risks of injury for the user. For this reason, make clearly visible that the
equipment shall not be used in such cases.
NOTE: Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may rub
off and leave small steel particles in combination with moisture brown rust stains.
If such corrosion occur on stainless steel parts, they are ne with an abrasive
(240 grit) to remove.
Please take care when transporting and setting up the fact that the components
are made of stainless steel with no „normal“ steel parts in contact.
ca.2450
6250
FREIG:
Mindestraum
GEZ:
Deutschland
WERKSTOFF / ROHMAß:
DIN 2768 - mH
1:50
DATUM: NAME:
-0,3 +0,3
DIN ISO 1302 REIHE 2
GEPR:
V.Bishop
ZG-NR:
27.01.2011
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
Ramus
WERKSTUECKKANTEN
BESTELL-NR:
MAßSTAB:
BENENNUNG:
KUNDE:
ZUL. ABWEICHUNG
NACH DIN 6784
OBERFLAECHEN NACH
Gewerbegebiet Larsheck
56271 Kleinmaischeid
A4
Extent of the minimum zone =
safety area
Diagram 3: Top view

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modi cations reserved. State: 11/2012 · S. 4
Mounting instructions for climbing equipment „ramus“
Item No. 515513401
In order to preserve a good visual appearance of your stilum playground equip-
ment over a long period one should take care of maintenance of the stainless
surface even despite of their corrosion resistance.
Especially areas, which can not be reached by rainfall should be frequently clea-
ned from dirt and deposits due to air pollution and dirt caused by the atmosphere.
Light soiling can easily be romoved by using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid cleaner
(e.g. on phosphoric acid) and rinse off with clear water after a short application
time. During cleaning with mild abrasive components, only wipe over stainless
steel surface in polishing direction.
For heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on
cars) or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g. ethyl
alcohol, isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over the sur-
face again.
Do not use any chlorid or hydrochloric containing cleaning products nor scouring
powder, bleaching - or silver polish cleaner. Cleaning intervals depend on type
and degree of soiling as well as on demands made on optical characteristics.
Therefore cleaning is advisable at intervals of six to twelve months – whereby in
the case of strong soiling it is appropriate to clean the playground equipment at
intervals of 3 to six months.