stilum Tamino 1 User guide

State: 08.08.2019 p. 1
Mounting instruction climbing equipment „Tamino 1“
Item-No. 51 5559 601
© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
balance plate
sliding arc
hexagons
slide climbing net
ladder bow
Diagram 1: Overall view of play equipment with description of individual elements

State: 08.08.2019 p. 2
Mounting instruction climbing equipment „Tamino 1“
Item-No. 51 5559 601
© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
1. Select the play equipment location in consideration of the required safety
area (see diagram 6: 6400 x 7700 mm).
2. Carry out excavation work for 9 foundations as shown in diagram 2 and 4.
After excavation compress the foundation oor.
Note: The combination equipment is built in on the play level. Pay attention
to items marked „play level” of play equipment!
3. Setup the main foundation, and the foundation for the sliding arc and the lad-
der bow, the foundation for the climbing net, the foundation of the slide and
the four other foundations acc. to the dimensions indicated in diagram 4 with
central horizontal reinforcement. Insert the foundation anchor of the slide into
the concrete mass as shown in diagram 5.
4. After a setting period of 10 - 14 days, depending on weather conditions and
foundation size - clean the surface of the foundations and start with the instal-
lation of the combination equipment.
5. Place the head of the catarpillar as described in diagramm 1 and 3 onto the
foundation.
Note: Do not screw the base plates onto the foundations yet!
Diagram 2: Side view with dimensions „Tamino 1“
500
835
1843
100
2980
300 450
2344
R
100
R
100
4135
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
Tamino 1
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:20
A3
Gewicht
Name
Name
Fundamentplan
1013-00-00
Maßstab
Behnke 14.06.17
A Rutschenfundament geän. 11.10.18 SI
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
Legende
Reinforcement plan:
Concrete foundation with reinforcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C 20/25
2293
2794
450
299
535
1843
1466
2344
510
936
351
1411
15°
30°
789
2155
191
782
243
4140
3376
124
124
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
2
Tamino 1
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:25
A3
Gewicht
Name
Name
Übersicht
1013-00-00
659.6 Maßstab
Behnke 02.06.17
A Hausbreite geändert 21.12.18 SI
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Diagram 3: Position of the elements „Tamino 1“

State: 08.08.2019 p. 3
Mounting instruction climbing equipment „Tamino 1“
Item-No. 51 5559 601
© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
6. Place the balance plate and the other hexagons according to the postitions in
diagram 3.
7. Add the addition parts (sliding arc, slide, ladder bow and climbing net) as
shown in diagram 1 and 3 and connect it with the screws included in the
delivery.
8. Align the play equipment once more on the foundations.
Note: Avoid sagging of the climbing net.
9. Drill holes into all foundations and screw the play equipment into the founda-
tions with the included heavy-duty dowels.
10. Fill up and compress the holes between the foundation and the foundation
hole with the excavation.
11. Seal the foundation with the safety cover required for the height of fall indica-
ted acc. to EN 1176-1.
Critical drop height: 840 mm.
Recommended surface material: grass, sand, wood chip, gravel, synth. fall
protection.
12. Do not allow children to use the equipment before the installation has been
nished.
13. After 3 months check the screws at the joints and retighten them if necessary.
Attention: If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to particu-
lar risks of injury for the user. For this reason make clearly visible that the equip-
ment shall not be used in such cases.
Diagram 4: Position of the foundations
slide
Main found-
ation
climbing
net
ladder bow
Climbing
bow
C
C
243
400
133
C-C
370
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
Tammy
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:20
A3
Gewicht
Name
Name
Fundamentplan
1231-00-00
309.6 Maßstab
x xx.xx.xx
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Diagram 5: foundation anchor of the slide
A A
500
300
1508
1249
1000
1100
300
600
500250
350
600
3981
600
600
4194
600
600
952
514
665
1428
1730
1000
2220
2382
2999
2422
1940
1362
1007
429
463
981
30
1109
1627
2518
2680
2780
2942
488
A-A (1 : 25)
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
2
Tamino 1
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:20
A3
Gewicht
Name
Name
Fundamentplan
1013-00-00
Maßstab
Behnke 14.06.17
A Rutschenfundament geän. 11.10.18 SI
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
Legende

State: 08.08.2019 p. 4
Mounting instruction climbing equipment „Tamino 1“
Item-No. 51 5559 601
© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
STAINLESS STEEL
NOTE: Play equipment, which contain components made of stainless
steel should not come with „normal“ steel parts in contact. Those steel
parts may rub off and leave small steel particles in combination with
moisture brown rust stains.
MAINTENANCE: If such corrosion occur on stainless steel parts, they
are ne to remove with an abrasive (240 grit).
Please take care when transporting and setting up the fact that the com-
ponents are made of stainless steel with no „normal“ steel parts in contact.
In order to preserve a good visual appearance of your stilum playground
equipment over a long period one should take care of maintenance of the
stainless surface even despite of their corrosion resistance.
Especially areas, which can not be reached by rainfall should be fre-
quently cleaned from dirt and deposits due to air pollution and dirt caused
by the atmosphere.
Light soiling can easily be romoved by using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid
cleaner (e.g. on phosphoric acid) and rinse off with clear water after a
short application time. During cleaning with mild abrasive components,
only wipe over stainless steel surface in polishing direction.
For heavily soiled surfaces, polishes can be used (e.g. for cleaning
chrome on cars) or for greasy and oily dirt alcoholic cleaning agents and
solvents (e.g. ethyl alcohol, isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over
the surface again.
6400
R1500
R
1500
1545
R
1500
R
2320
7700
2019
1543
1644
1584
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
Tamino 1
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:40
A3
Gewicht
Name
Name
Draufsicht
1013-00-00
Maßstab
Behnke 13.06.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Diagram 6: Top view with the minimum space „Tamino 1“

State: 08.08.2019 p. 5
Mounting instruction climbing equipment „Tamino 1“
Item-No. 51 5559 601
© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
Do not use any chlorid or hydrochloric containing cleaning products nor scouring
powder, bleaching - or silver polish cleaner. Cleaning intervals depend on type and
degree of soiling as well as on demands made on optical characteristics. Therefore
cleaning is advisable at intervals of six to twelve months – whereby in the case of
strong soiling it is appropriate to clean the playground equipment at intervals of three
to six months.
WOOD
NOTE: For all play equipment with wooden elements, it cannot be ruled out that dry
cracks may develop. These natural changes of wood are dependent on climate con-
ditions as well as on the age and usage of the play equipment. Longer dry periods
may lead to more dry cracks.
This development, however, does not represent a quality defect. Static properties of
the equipment are not impaired.
See EN 1176 Bbl 1:2019-01 4.2.7.6: Dry cracks in wood elements as a consequence
of weather conditions are not to be considered as dangerous openings in terms
of the standard due to the fact that the shape of the cracks (tapering towards the
inside) makes it almost impossible for ngers to get trapped in them.
MAINTENANCE: To ensure a long life of stilum playground equipment, wooden
surfaces should be regularly re-glazed. This provides the wooden surfaces with the
necessary protection and preserves the look. Areas which are not exposed to rain
should be regularly freed from deposits.
The cleaning intervals depend on the degree and type of soiling as well as on the
exigencies on cleanliness. It is recommended to clean and / or glaze at every 6 to 12
months, or to shorten the cleaning interval to 3 to 6 months if the wheather condi-
tions are bad.
LASUR: Use a soft and at brush or / and a glaze application roll to paint.
The wood should be cleaned a few hours before glazing. That can be done with
mild javel water, which should in any case be rubbed off afterwards. For resistant
dirt use a wood cleaner. Eventually a light abrasion is necessary. If water-based de-
tergents are used for cleaning, please ensure that the wood elements are thorough-
ly dried before the glazing is done.
Always brush in one direction, so that the glaze can spread evenly. Apply very
thinly!
Remove glaze with a soft cotton cloth.
Then let the freshly glazed wood dry for at least one day and prohibit the use of the
equipment for this duration.