stilum silva 1 User guide

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 16.02.2018 p. 1
Mounting instruction large play equipment „silva 1“
Item-no. 51 5520 601
Diagram 1: Overall view of play equipment with description of individual elements
House
climbing eye
post
slide bar

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 16.02.2018 p. 2
Mounting instruction large play equipment „silva 1“
Item-no. 51 5520 601
1. Select the play equipment location in consideration of the required safety
area (see Diagram 3: 4300x7000mm).
2. Carry out excavation work for 3 foundations as shown in Diagram 2.
After excavation, compress the foundation oor.
Note: Cover the foundation holes with the safety cover required for the height
of fall indicated.The combination equipment is built in on the play level. Pay
attention to items marked „game level” of play equipment!
3. Setup the main foundation (LxBxH 1400x1400x300mm) and the foundations
for climbing eye and sliding bar (LxBxH 600 x 600 x 300mm), acc. to the
dimensions indicated in diagram 2 in the quality class C 20/25.
4. After a setting period of 10-14 days, depending on weather conditions and
foundation size - clean the surface of the foundations and start with the instal-
lation of the combination equipment.
5. Place the premounted construction of the posts as described in diagramm 4
and 2 on the foundation.
Note: Do not screw the base plates onto the foundations yet!
Diagram 2: Rear view with dimension details „silva 1“
Reinforcement plan:
Concrete foundation with reinforcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C 20/25
Foundations for attachment parts are no-reinforced
300
600 1400 600
450
A A
600 1194 1400 991 600
400 400
4785
A-A
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
silva 1
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:40
A3
Gewicht
Name
Name
Fundamentplan
1016-00-00
6623.2 Maßstab
Behnke xx.xx.xx
A Schnitt 14.02.18 ES
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
Legende
300
600
1400
600
450
A A
600 1194 1400 991 600
400 400
4785
A-A
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
silva 1
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:40
A3
Gewicht
Name
Name
Fundamentplan
1016-00-00
6623.2 Maßstab
Behnke xx.xx.xx
A Schnitt 14.02.18 ES
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
Legende

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 16.02.2018 p. 3
Mounting instruction large play equipment „silva 1“
Item-no. 51 5520 601
6. Place the pre-mounted house on the connection plate and x it.
7. Connect the climbing eye and the sliding bar with the tower as described
in diagram 1 and 4 and x it (screws included in delivery).
8. Align the play equipment more on the foundations.
9. Drill holes into all foundations and screw the play equipment into the
foundations with the included heavy-duty dowels.
10. Fill up and compress the holes between the foundation and the foundati-
on hole with the excavation.
11. Seal the foundation with the safety cover required for the height of fall
indicated.
Critical drop height: 1500 mm.
Recommended surface material: sand, wood chip, gravel, synth. fall
protection.
12. Do not allow children to use the equipment before the installation has
been nished.
13. After 3 months, check the screws at the joints and retighten them if
necessary.
Attention: If the play equipment has been incompletely installed or partly
dismantled when carrying out maintenance and repair work, this may lead to
particular risks of injury for the user. For this reason, make clearly visible that
the equipment shall not be used in such cases.
Diagram 3: Minimum space
7000
4300
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach DIN ISO 1302 Reihe 2
Zul. Abweichung DIN 2768 - mH
1
silva 1
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:30
A3
Gewicht
Name
Name
Draufsicht
1016-00-00
311.7
Maßstab
Behnke 24.03.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 16.02.2018 p. 4
Mounting instruction large play equipment „silva 1“
Item-no. 51 5520 601
Diagram 4: mounting parts climbing eye and sliding bar
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
silva 1
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:10
A3
Gewicht
Name
Name
Fundamentplan
1016-00-00
13888.6 Maßstab
x xx.xx.xx
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Attention: If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to
particular risks of injury for the user. For this reason, make clearly visible that the
equipment shall not be used in such cases.
NOTE: Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may rub
off and leave small steel particles in combination with moisture brown rust stains.
If such corrosion occur on stainless steel parts, they are ne to remove with an
abrasive (240 grit).
Please take care when transporting and setting up the fact that the components
are made of stainless steel with no „normal“ steel parts in contact.

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved State: 16.02.2018 p. 5
Mounting instruction large play equipment „silva 1“
Item-no. 51 5520 601
In order to preserve a good visual appearance of your stilum playground equipment
over a long period one should take care of maintenance of the stainless
surface even despite of their corrosion resistance. Especially areas, which can not
be reached by rainfall, should be frequently cleaned from dirt and deposits due to air
pollution and dirt caused by the atmosphere. Light soiling can easily be removed by
using a high pressure cleaner. For persistent deposits use a clean cloth moistened
with a special liquid cleaner (e.g. on phosphoric acid) and rinse off with clear water
after a short application time. During cleaning with mild abrasive components, only
wipe over stainless steel surface in polishing direction. For heavily soiled surfaces,
polishes can be used (e.g. for cleaning chrome on cars) or for greasy and oily dirt
alcoholic cleaning agents and solvents (e.g. ethyl alcohol, isopropyl alcohol or ace-
tone). However, it should be noted that the dissolved soiling is not spread over the
surface again. Do not use any chloride or hydrochloric containing cleaning products
nor scouring powder, bleaching - or silver polish cleaner. Cleaning intervals depend
on type and degree of soiling as well as on demands made on optical characteris-
tics. Therefore cleaning is advisable at intervals of six to twelve months – whereby in
the case of strong soiling it is appropriate to clean the playground equipment at inter-
vals of 3 to 6 months.
MAINTENANCE OF WOODEN ELEMENTS
To ensure a long life of stilum playground equipment, wooden surfaces should be
regularly re-glazed. This provides the wooden surfaces with the necessary protec-
tion and preserves the look. Areas which are not exposed to rain should be regular-
ly freed from deposits.
The cleaning intervals depend on the degree and type of soiling as well as on the
exigencies on cleanliness. It is recommended to clean and / or glaze at every 6
to 12 months, or to shorten the cleaning interval to 3 to 6 months if the wheather
conditions are bad.
LASUR APPLICATION
Use a soft and at brush or / and a glaze application roll to paint.
The wood should be cleaned a few hours before glazing. That can be done with
mild javel water, which should in any case be rubbed off afterwards. For resistant
dirt use a wood cleaner. Eventually a light abrasion is necessary. If water-based de-
tergents are used for cleaning, please ensure that the wood elements are thorough-
ly dried before the glazing is done.
Always brush in one direction, so that the glaze can spread evenly. Apply very
thinly!
Remove glaze with a soft cotton cloth.
Then let the freshly glazed wood dry for at least one day and prohibit the use of the
equipment for this duration.