Stirling STR-ESPM User manual

Espresso Machine

Quick Start Guide
Fill the tank
Fill the tank with fresh tap
water. It is removable,
if you prefer to fill it under the tap.
Colour
Model Number STR-ESPM
Warranty 3 Years
Version QSG-V1.0
Add coee
Remove the porta filter, add
coee (1 measuring spoonful for 1 cup,
2 for 2 cups), press the coee down
lightly with the tamp and fit the porta
filter to the group head.
Preheat
Press the ON/OFF button to switch
the machine on. Insert a filter into the
porta filter, fit the porta filter to the
group head and place a cup (or two)
underneath the espresso outlets.
Make espresso
Set the HOT WATER/STEAM selector to HOT WATER
(released), place the empty, warm cup(s) underneath
the outlets and when the HEATING light turns o,
turn the function dial to the position.
Turn the function dial back to the neutral position
when you have enough coee in your cup(s).
Froth milk
Fill around 100mL of cold milk into the cold stainless steel jug.
Swing the steam wand to the side of the appliance and place
the milk jug underneath, with the nozzle just below the surface
of the milk. With the function dial set to the position,
move the jug round for around 40-45 seconds, making sure
the nozzle remains submerged. When the milk is textured to
your liking, turn the function dial back to the neutral position.
NOTE: When the HEATING light turns o, turn the function dial to the position, let some hot
water flow into the cup(s) and then turn the dial back to the neutral position to switch o the pump.
Let the water heat the cups and discard it just before brewing coee.
Espresso machines are relatively complex appliances to use. Please read the full manual for comprehensive
instructions and safety advice before first use. This Quick Start Guide only contains basic information.
For more information
please visit www.stirlingappliances.com.au
or call 1300 886 649
Matte White