STMicroelectronics STM32F0 Series User manual

Copyright © 2015 ARM Ltd. All rights reserved.
Quick Start Guide
STMicroelectronics 32F030 Discovery Board
Install Keil MDK Version 5
Download and install the MDK Core from www.keil.com/mdk5/install
Works with the free MDK version for ST www.keil.com/stmicroelectronics-stm32/mdk
Add Software Pack using the Pack Installer
Keil::STM32F0xx_DFP –STMicroelectronics STM32F0 Series Device Support
Power up the board
Do not connect the board to the PC! Go to C:\Keil_v5\ARM\STLink\USBDriver and double-click
stlink_winusb_install.bat to install the drivers for the on-board USB ST-Link/V2.
Connect a USB power supply USB ST-Link/V2 port to the computer using a Mini USB cable.
Windows recognizes the ST-Link/V2 device and installs the drivers automatically.
Verify Installation using example projects provided in the Software Pack
Copy an example using the Pack Installer. Compile, download to Flash, and debug the application. The
provided examples are ready to run.
More Information
Getting Started User’s Guide www.keil.com/gsg
Board Information www.keil.com/boards2/st/stm32f030_discovery
STM32F0 Discovery User’s Guide www.st.com/stm32f0-discovery
Learning Page www.keil.com/learn
Related Products
MDK Version 5 www.keil.com/mdk5
MDK-Professional Middleware www.keil.com/mdk5/middleware

Copyright © 2015 ARM Ltd. All rights reserved.
Debug and Trace Configuration
STMicroelectronics 32F030 Discovery Board
Enable ST-Link Debugger
Select Options for Target or press ALT+F7.
Go to the Debug tab and select the ST-Link Debugger.
Connect Using SWD
Click on the Settings button. On the Debug tab select the Port SW. This board
does not support JTAG.