Streacom F1C User manual

Computer Chassis Installation Guide
F1C
WESENA / STREACOM
moreinfomations browseour web: www.streacom.com

CONTENT
1.F1C overview----------------------------------------------------------4
2.Open the Top panel---------------------------------------------------5
3.Cookingfan installment ---------------------------------------------5
4.Montherboard installation--------------------------------------------6
5.HDD installation--------------------------------------------------------7
6.ODD installation--------------------------------------------------------7
7.Close the Top pane l--------------------------------------------------8
8.PCB+cablesreference diagram-----------------------------------8
moreinfomations browseour web: www.streacom.com

F1C overview
⑤. Power blue LED
⑥. Power button
⑦. Fan bracket
⑧. Power PCB board
⑨. HDD/ODD bracket
⑩.IR receiver
⑪. DC hole
①. IR Receive window
②. ODD button bay
③. Slot of ODD
④. TOP panel
1 2 3 6 7
4 8 9 10
5 11
Model: F1C
Material: 100% full Aluminum
Color：Silver / black / Gold
Motherboard：Mini ITX
HDD drive bay：1x2.5” or 2X3.5’’ HDD drive bay
ODD drive bay：an ultra-thin standard slot-in optical drive
Cooling：1x40X40X10mm fan bay
Dimension：197mm×197mm×75mm (L×W×H)
Power Supply：Optional build in DC power
Remotecontrol：Optional the MCE remote control built-in IR receiver
Net Weight：1.6KG
moreinfomations browseour web: www.streacom.com

Open top plate
Using screwdriver to open top
plate from the back of cooling
hole, and than take out the top
plate.
Shown as photos
Take out the bracket of case and fan
Take off the 6 case bracket screws,take
out case bracket and fan bracket.
Take out the power in case, and put
them away
Shown as photos
Assembling fans
Put the fan in , and take
outthe 4 fan screws, lock
Itto the fan bracket
Shown as photos
Fix fan bracket in the case
Put the assembled fan bracket
into the case .alignment and
lock it
Shown as photos
moreinfomations browseour web: www.streacom.com

Motherboard installment
Put the I/O baffle plate first , and then
put the motherboard.Alignment hole
and lock it
Shown as photos
Connecting relevant line in
motherboard
Insert power, connect power line and IR
line etc.
Shown as photos
Connecting relevant line in
motherboard
Insert DC connector and power and etc.
Shown as photos
moreinfomations browseour web: www.streacom.com

HDD installment
Put 2.5 inch HDD, and then take out
theHDD screws(FM3*5) in the
accessories.Alignment hole and lock
it
Shown as photos
ODD installment
Put the ODD on the ODD bracket.
Alignment hole and lock thescrews.
Shown as photos
Button installment
Put the ODD button
Shown as photos
moreinfomations browseour web: www.streacom.com

Cover top plate
Check the installment place and the connectors again after finished the
inner installment.Arrange the Flat Cable in case, in order to avoid
retaining CPU fan and cooling fan. And then cover the top plate lastly
Shown as photos
①
Bracket installment
Put the brackets with ODD and HDD into the right place ( ①) ,and then
insert the ODD and HDD line into the motherboard,. Put the bracket with
lines into the right place of case. Alignment hole and lock screws
Shown as photos
moreinfomations browseour web: www.streacom.com

WESENA / STREACOM
Thank you for usage of our Products
moreinfomations browseour web: www.streacom.com