STREET WISE PF9200 Series User manual

PF9200 Series Instructions Rev 4/12/2018
PF9200 Series Instructions
RECHARGING
1. The rechargeable batteries are already installed. Please do not attempt to open the unit, as this will
void the warranty.
2. We recommend charging the stun flashlight before it is used. Simply plug the charging cord into the
bottom of the unit and into a standard outlet. The green light on the bottom of the unit will illuminate
while the charging cord is plugged in. Note that the green light does not turn off or change color
when fully charged. Simply charge for 8 hours then unplug it from the charging cord.
IMPORTANT: do not charge for more than 8 hours at a time. Overcharging can damage the unit and
void the warranty. When used infrequently the unit will need to be recharged for 8 hours every 60
days. If the flashlight is not as bright or if the electrical current becomes noticeably weaker, the unit
will need to be recharged.
USING THE FLASHLIGHT
Note: The flashlight will work with the Stun ON/OFF Switch in either the ON or OFF position. If you are in a
situation where you might need to quickly activate the stun gun (like walking at night) we recommend you
use the ON position. If you don’t anticipate needing the stun gun (at home during a power outage) we
recommend the OFF position.
1. Slide the Function Select Switch up to the top position.
2. The flashlight will come on either: the Hi, Medium, Low, Strobe Mode, or SOS setting.
3. If you want to change to another light mode move the Switch down to the middle position, then back
up to the top position.
TESTING THE STUN GUN
We recommend test firing the stun gun and becoming familiar with its operation before you need to use it
to defend yourself. (WARNING: Do not test fire the stun gun for more than 1 second as this will damage
the unit and void the warranty.)
1. Slide the ON/OFF switch (located on the bottom of the unit) to the ON position.
2. Slide the Function Select Switch down to the bottom position.
3. Press the Stun Activation Button to test fire the unit. Do not hold down the button for more than 1
second. You will see and hear a charge fire across the top of the unit between the test probes.
1. Contact Probes
2. LED Flashlight
3. Function Select Switch
4. Stun Activation Button
5. Charging Port
6. On/Off Switch
7. Charging Indicator Light
1
3
1
2
4
1
5
7
6
PF9200BK
PF9200GM

PF9200 Series Instructions Rev 4/12/2018
4. IMPORTANT:Slide the On/Off Switch on the bottom of the unit to the OFF position when you have
finished test firing.
USING THE STUN GUN IN SELF DEFENSE
1. With the On/Off switch (located on the bottom of the unit) to the ON
position touch your assailant’s body with the contact probes and press
the Stun Activation Button.
2. Touching anywhere on the assailant’s body will have an effect.
However, the maximum effect is achieved in the areas to the right:
3. When touching the assailant’s body, you will not see or hear the
electrical charge as you do when the unit is test fired. You can hold
down the Stun Activation Button for more than 1 second, as this will not
damage the unit, as it will when being test fired.
4. You do not have to be concerned about the effects of the charge being
transferred to you. Even if the assailant touches you while being
stunned, you will not feel the effects of the charge.
EFFECTS OF THE UNIT ON AN ASSAILANT
1. Touching an assailant for less than 1 second will cause minor muscle contractions and have a
repelling effect.
2. Touching an assailant for 1 to 2 seconds will cause muscle spasms and a dazed mental state.
3. Touching an assailant for 3 to 5 seconds will cause loss of balance and muscle control, total mental
confusion, and disorientation. All effects to the assailant are temporary; the stun gun can cause no
permanent harm. (NOTE: The device should not be used for longer than 5 seconds.)
WARRANTY
Cutting Edge Products, Inc. extends a lifetime warranty to the PF9200BK & PF9200GM for the product
against defects in materials or workmanship, with the following exceptions:
1. The warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable
care, moisture, the affixing of any attachment not provided with the product, loss of parts, or
recharging the unit in any manner not in accordance with the included instructions.
2. The warranty will be voided if the unit has been opened or tampered with in any way (unless by an
authorized dealer) or if any unauthorized replacement parts have been used.
NOTICE
Purchaser must check and abide by all local laws governing the possession and use of stun guns. In
addition, the stun gun must only be used in a lawful manner for self-defense. NOTE: Not to be used on
children, persons with heart disease, or any vital part of the human body. Not to be stored or used in
environments where it is damp or humid or where there are extreme hot or cold temperatures. Do not use
on metal objects.
CONDITIONS OF SALE
Purchase of this product is an agreement by the purchaser/user to hold all sellers and manufacturers
harmless of all liabilities and damages.
TO OBTAIN SERVICE
Contact the Authorized Dealer from whom you purchased this unit for a Return Merchandise Authorization.
The return unit must be sent postage prepaid and proof of purchase is required. Damage or loss occurring
during shipment is not covered by this warranty.
U.S. Patent #D736, 975 S