STREET WISE SWPFTB9R User manual

1Full Press: When fully pressed, you will hear a clicking sound. Revised 03/21/2014
SWPFTB9R
Instruction Manual
STOP. Before Proceeding, Please Read: This stun baton flashlight performs many functions and has built in safety
features that can be confusing if you do not take time to read these directions and familiarize yourself with it. The key to
understanding how this unit operates is the “Function-Select Button.” Each time this button is pressed, the function
changes in the following order: Light, Stun, Off. To help you remember the order, the corresponding symbol is shown
below the Function-Select Button: for Light, for stun, and for off.
Recharging
1. The rechargeable batteries are already installed. The unit cannot be opened, as this will void the warranty.
2. We recommend charging the stun baton before it is used. Simply plug the charging cord into the bottom of the unit and into a
standard outlet. A green light will come on while the unit is charging. IMPORTANT: do not charge for more than 8 hours at a
time. Overcharging can damage the unit and void the warranty. Under normal use the unit will need to be recharged for 8
hours every 60 days. If the LED flashlight is used frequently or if the electrical current becomes noticeably weaker, the unit will
need to be recharged.
Using the Flashlight
Overview: This unit features three light strengths (Maximum, Medium, & Low) and two light patterns (Strobe & SOS). When the
situation does not require maximum light strength, the lower light settings can be used to conserve battery strength.Note that the
ON/OFF Safety Switch on the bottom of unit only affects the stun mode so the light will work when this switch is set to either on or
off.
1. Press the Function-Select Button until you see the flashlight turn on (remember there are three functions in the following
order: Light, Stun, & Off).
2. Once the light is on you can change the light mode by half pressing the Function-Select Button. The light mode will change in
the following order: Maximum, Medium, Low, Strobe, SOS. Warning: if you fully press the Function-Select Button the light
will turn off and you will be in the Stun Mode. In this mode pressing the Stun Activation Button will discharge the stun gun (if
the ON/OFF switch is set to ON).
3. To turn off the light, fully press1the Function-Select Button. Remember the order of the functions: When in light Light
Function, pressing once moves the function to Stun, pressing twice moves it to Off and pressing a third time moves it back to
Light.
Testing the Stun Baton (WARNING: Do not test fire the stun baton for more than 1 second as this will damage the unit and void
the warranty.)
1. Slide the on/off switch on the bottom of the unit to the “ON” position.
2. Press the Function-Select Button until you are in the Stun Function (Remember there are three functions- Light, Stun, & Off)
3. The easiest way to locate the Stun Function is to fully press1the Function-Select Button until you see the flashlight turn on.
2
Triple Stun
Contact Probes
Stun Activation Button
Function-Select Button
(Light, Stun, Off)
1
ON/ OFF Safety Switch
(Not Shown):
Charging Port
(Not Shown)
Attached Belt Clip
(Not Shown)

1Full Press: When fully pressed, you will hear a clicking sound. Revised 03/21/2014
4. Once the flashlight is on, press the Function-Select Button once more. The flashlight will turn off and the unit is now in Stun
Function.
5. Press the Stun Activation Button to test fire the unit. Do not hold the button down for more than 1 second. You will see and
hear an electrical charge fire across the top of the unit between the contact probes.
6. Once your test is complete, fully press1the Function-Select Button to move out of Stun Mode. If you fully press1this button
once you will be in the OFF mode and if you fully press1it twice you will be in the Light Mode.
Using the Stun Baton in Self Defense
1. Before using the stun baton in self-defense, we recommend you become familiar with how this unit operates so you can
quickly protect yourself using the Stun Function. See How to Quickly Access the Stun Function below.
2. Following the directions under Testing the Stun Baton, move the unit into the Stun Function Mode.
3. Touch your assailant’s body with the contact probes and press the Stun Activation Button.
4. Touching anywhere on the assailant’s body will have an effect. However, the maximum effect is
achieved in the areas shown to the right:
5. When touching the assailant’s body, you will not see or hear the electrical charge as you do when the
unit is test fired. You can hold the Stun Activation Button down for more than 1 second, as this will not
damage the unit, as it will when being test fired.
6. You do not have to be concerned about the effects of the charge being transferred to you. Even if the
assailant touches you while being stunned, you will not feel the effects of the charge.
How to Quickly Access the Stun Function
1. When you are using the flashlight fully press1the Function-Select Button then press the Stun Activation Button.
2. When you are not using the flashlight, we recommend leaving the Function-Select Button in the Stun position. Then slide the
ON/OFF switch on the bottom of the unit to the OFF position. When you want to quickly use the Stun Function, slide the
ON/OFF switch on the bottom of the unit to the ON position and press the Stun Activation Button.
Effects of the Unit on an Assailant
1. Touching an assailant for less than 1 second will cause minor muscle contractions and have a repelling effect.
2. Touching an assailant for 1 to 2 seconds will cause muscle spasms and a dazed mental state.
3. Touching an assailant for 3 to 5 seconds will cause loss of balance and muscle control, total mental confusion, and
disorientation. All effects to the assailant are temporary; the stun batons can cause no permanent harm. (NOTE: The device
should not be used for longer than 5 seconds.)
WARRANTY: Streetwise Security Products extends a lifetime warranty to the SWPFTB9R for the product against defects in materials or
workmanship, with the following exceptions:
1. The warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, moisture, the affixing of any
attachment not provided with the product, loss of parts, or recharging the unit in any manner not in accordance with the included instructions.
2. The warranty will be voided if the unit has been opened or tampered with in any way (unless by an authorized dealer) or if any unauthorized
replacement parts have been used.
NOTICE: Purchaser must check and abide by all local laws governing the possession and use of stun batons. In addition, the stun batons must only
be used in a lawful manner for self-defense. NOTE: Not to be used on children, persons with heart disease, or any vital part of the human body. Not to
be stored or used in environments where it is damp or humid or where there are extreme hot or cold temperatures. Do not use on metal objects.
Conditions of Sale: Purchase of this product is an agreement by the purchaser/user to hold all sellers and manufacturers harmless of all liabilities
and damages.
To Obtain Service: Contact the Authorized Dealer from whom you purchased this unit for a Return Merchandise Authorization. The return unit must
be sent postage prepaid and proof of purchase is required. Damage or loss occurring during shipment is not covered by this warranty.