Streetwize SWOBD7 User manual

SWOBD7
Auto Diagnostic
OBDIIFault Scanner
with Colour Screen
Intention For Use
Thank you for purchasing this Auto Diagnostic
OBDII Fault Scanner with Colour Screen.
An advanced OBDII vehicle diagnostic reader
that comes with a TFT colour display. The
device provides clear Diagnostic Trouble Code
(DTC) readings to pinpoint the reason behind
why an engine warning light is showing.
Please read through the information in this
document. Please keep this document for
future reference.
Product Information
SWOBD7 works on all 1996 and later 12V petrol and diesel vehicles that are OBDII compliant
US, European and Asian vehicles. For your vehicle to be OBD II compliant it must have a 16-pin
DLC (Data Link Connector) and the Vehicle Emission Control Information Label must state that the
vehicle is OBDII compliant
The SWOBD7 can identify the cause of your CHECK ENGINE and perhaps fix it. It can help you to
pass annual emissions tests and SMOG CHECK.
It covers full OBDII/EOBD diagnostic functions for engine systems, O2 Sensor test, EVAP systems
test and on-board monitoring test, it can give you full control of your vehicle’s running status, while
the graphical and numeric data stream display will help you to find out the faulty sensor readings.
SWOBD7 can read common fault codes and can help to find the problem quickly and accurately,
thus enableing quick vehicle repair.
It support multi-languages, you can use the Find Tool Setup, then select the language you require.
Cleaning and Maintenance
To prevent personal injury or damage to vehicles and/or the scan
tool, read this instruction manual first and observe the following
safety precautions at a minimum whenever working on a vehicle:
• Always perform automotive testing in a safe environment.
• Wear safety eye protection that meets ANSI standards.
• Keep clothing, hair, hands, tools, test equipment, etc.. away from all moving or hot
engine parts.
• Operate the vehicle in a well ventilated work area: Exhaust gases are poisonous.
• Put blocks in front of the drive wheels and never leave the vehicle unattended while
running tests.
• Use extreme caution when working around the ignition coil, distributor cap, ignition
wires and spark plugs. These components create hazardous voltages when the
engine is running.
• Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual
transmission) and make sure the parking brake is engaged.
• Keep a fire extinguisher suitable for petrol/chemical/electrical fires nearby.
• Don’ t connect or disconnect any test equipment while the ignition is on or the
engine is running.
• Keep the scan tool dry & clean, free from oil/water or grease. Use a mild detergent
on a clean cloth to clean the outside of the scan tool, when necessary.

1 2
3
4
65
7
Technical Parameters
Voltage Measurement Range: 6-18V DC.
Unit Operation/Buttons
8. Engine system operates normally
without fault codes
9. Engine system is abnormal and
there is pending fault code
10. Engine system has fault, and check
engine light is on.
Features and Functions
Main Menu
When the OBDII plug is connected to the vehicle OBDII socket the main menu will display on
the unit - to begin diagnostics turn the ignition key of the vehicle to standby.
Voltmeter function and battery level indicator.
Cranking System Test; Analyze the state of
the cranking system, display the cranking
voltage,and the cranking time.
Graphs of the waveform of the Cranking
System.
Charging System Test; Analyze the state of
the charging system, waveform of the ripple
test, unload and load voltage.
Easily determines the cause of the Check
Engine Light (MIL).
Turns off Check Engine Light (MIL), clears
codes and resets monitors.
Displays DTC definitions on unit screen.
Views freeze frame data.
Displays monitor and I/M readiness status
(emissions).
Identifies pending codes.
Read live PCM data stream.
Displays live O2 sensor test data.
Graphs data (1996 and newer).
Reads, stores & playbacks live sensor data,
DTC data and freeze frame data.
Performs modules present test.
Retrieves vehicle information (VIN, CIN
and CVN).
Supports CAN (Controller Area Network) and
all other current.
OBD-II protocols.
Built-in OBD-II DTC lookup library.
Large easy-to-read backlit LCD screen.
1. ESC: exit
2. I/M: quick enter I/M
Readiness
3. Up
4. Down
5. Left
6. Right
7. OK – Enter

Technical Parameters
Voltage Measurement Range: 6-18V DC.
Unit Operation/Buttons
8. Engine system operates normally
without fault codes
9. Engine system is abnormal and
there is pending fault code
10. Engine system has fault, and check
engine light is on.
Features and Functions
Main Menu
When the OBDII plug is connected to the vehicle OBDII socket the main menu will display on
the unit - to begin diagnostics turn the ignition key of the vehicle to standby.
Identifies pending codes.
Read live PCM data stream.
Displays live O2 sensor test data.
Graphs data (1996 and newer).
Reads, stores & playbacks live sensor data,
DTC data and freeze frame data.
Performs modules present test.
Retrieves vehicle information (VIN, CIN
and CVN).
Supports CAN (Controller Area Network) and
all other current.
OBD-II protocols.
Built-in OBD-II DTC lookup library.
Large easy-to-read backlit LCD screen.
To Diagnose Vehicle
Select Diagnose from the main
screen, after a short analysis the
following screen will show. Press OK
and select the error/information you
wish to see from the list of functions
opposite.
I/M Readiness
Select I/M Rediness from the main
screen or press the I/M Rediness
button the front of the unit then press
OK, the following screen will show
DTC Lookup
Select DTC Lookup on the main menu
and press OK and follow the onscreen
instructions.
Battery System
Select Battery System on the main
menu and press OK and follow the
onscreen instructions.
Voltmeter
Select Voltmeter on the main menu.
Review History
Select Review History on the main
menu and press OK and follow the
Read Codes
Erase Codes
I/M Readiness
Data Stream
Freeze Frame
O2 Sensor Test
On-Board
Monitoring
Evap System
(mode$8)
Vehicle
Information

Streetwize, Ashburton Road West,
Trafford Park, Manchester, M17 1RY
www.streetwize.co.uk
EU Regd. Address:
Ace Supply Co (Europe) Ltd. 25 Herbert Place, D02 A098 ROI
For Product Support:
E: [e-mail]
T: [phone]
Technical Support
If you require any technical support within the warranty period, please contact us on
[email protected] and provide the product name and supplier code (see front of
manual) along with the technical query and proof of purchase.
The WEEE symbol
M17 1RY
on this product means that this product should be ethically
dismantled or recycled to minimise environmental impact. Please check with your local
authority for more information.
Important: Additional Safety Information
This device is NOT intended for use by persons (including children) with reduced
physical, sensory or mental capabilities or lack of experience and knowledge, unless they
are supervised or have been given instruction concerning use of the device by a person
responsible for their safety.
Review History
Select Review History on the main
menu and press OK and follow the
onscreen instructions.
To check the information as listed
opposite.
Tool Setup
Select Tool Setup on the main menu and press OK, follow the onscreen instructions to
select language and other information.
Help
Select Help on the main menu and press OK and follow the onscreen instructions to
select from a comprehensive list of topics.
About
Select About on the main menu and
press OK to see information regarding
the current software versions and
other information.