Studio 77474295 User manual

W87*D97-167*H101-78CM

BEFORE ASSEMBLY
Check all components are present
Do not use sharp knives to open any packaging
Keep children and animals away from work area
Ensure you have enough space to lay out the components before starting assembly
Assembly the item on a soft level surface as close to its final position as possible
Do not stand or put weight on the product or components, this may cause damage
Assembly will be easier with 2 people
Do not use power tools for assembly
Dispose of all packaging carefully and responsibly
If feet and accessories are not visible they may be found in a zip opening under the chair/Sofa
CARE AND MAINTAINENCE INFORMATION
Only clean the product with a soft damp cloth and mild detergent, do not use bleach or abrasive
cleaners.
Spillages should be removed immediately to avoid damage
Do not place furniture directly in front of fires, radiators or any other heat source, leave a minimum
of 20cm.
Avoid exposing the chair to direct sunlight as this may result in fading
Vacuum and brush weekly to avoid build-up of dust keeping your product in good condition
Please read the labels attached to cushions and fabrics following the guidelines for care and cleaning.
Sharp objects ie Keys, buckles, keys, toys & jewellery can easily snag the material.
Hot objects ie mugs, cups can permanently disfigure upholstery.
Do not sit on the arms of chairs
Do not exceed the maximum weight limit 130 KG
Bolts and screws should be checked and tightened on a regular basis.
To move a chair or sofa lift from the base. Do not pull by the arms. Improper handling can cause
damage to stitching and feet.
Do not allow pets to climb on chair sharp claws can damage the fabric. Animal saliva, oils and body
fluids is damaging to leather
Avoid wearing dark clothing including denim
Avoid leaving newspapers on the furniture

CLEANING
Thorough cleaning is recommended every 6 months
Do not use harsh chemicals
Use a soft damp cloth with a gentle cleaning aid if necessary
Never use hot water on the fabric
Do not soak
Accidental spillage
Always tip the excess from the surface
Blot the liquid with tissue
Sponge the area if necessary but do not over wet
Cover the whole area to avoid staining
Always remove stains gently in the direction of the pile. Do not scrub
Grease/Oil based Stains
Use a gentle spot cleaner, if necessary, working from the edge inwards to avoid
spreading
If possible work from, the wrong side of the fabric
Do not Scrub

COMPONENT PARTS
PLEASE CHECK YOU HAVE ALL COMPONENTS LISTED BEFORE BEGINNING ASSEMBLY
A X1 Seat Unit
B X1 Back Cushion
C X1 Left back ear
D X1 Right back ear

Assembly Instruction
Stage 1 - Preparing the Seat Unit
NOTE: It would be useful to ask someone
to help you at this stage.
Step 1
Carefully tilt back the seat unit onto it's back.
See Fig.1.
Step 2
Take the two back ears from the iron frame.
See Fig.2.
Stage 2 - Fitting the Back Cushions
NOTE: It would be useful to ask someone
to help you this stage.
1. Attach the Back to the seat unit .
Then engage the metal locks and push them
together until you hear them lock into position.
See Fig. 3.
NOTE: Carefully line up the two side metal
locks. Ensure they align correctly.
Fit the velcro cover which is on the back
cushions onto the velcro of the seat unit.
2. Put the left ear to the left, the right ear
to the right.
See Fig. 4.
NOTE: You can ensure the Back Cushions
are closing joined together by adjusting the
metal frame as.

Assembly Instruction
Stage 3- Operating the Unit
Back and Foot Rest Adjustment
This Chair features a reclining back rest and
raised foot rest. You need to be sitting in the
chair to activate the features.
1.Just pull the handle of the chair.
The back will stretch and foot rest will open.
See Fig. 5.
2.Adjust the recliner to your own requirements
by yourself.
Stage 4- Finishing the Unit
Finally carefully place the unit in the desired
location.
See Fig. 6.
CAUTION:
–Beware of entrapment. Keep hands and
finger clear of the tilt merchanism when
operating the controls.
–Ensure that children or pets are not
playing or lying in the way when the tilt
meachanism is operated.
–Prevent children from playing on the
furniture or with the controls.