fantastic furniture Willow MK2 User manual

Willow MK2
Bunk Twin
fantasticfurniture.com.au
Version 1.0

Helpful bunk bed safety tips
Bunk beds should be checked periodically to ensure that the guardrail, ladder and other
components are secure and in the correct position and all connectors are tight.
We recommend that children under the age of nine (9) do not use the upper bunk. Children
should be discouraged from playing on the bunk bed.
No more than one occupant should use the upper bunk at any time (unless otherwise stated).
Bunk beds should be placed a minimum of 2 metres away from any ceiling fans to prevent any
injury to the upper bunk occupant.
We’re thrilled you’ve chosen Fantastic Furniture
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
fantasticfurniture.com.au Page 2
to help create a home you’ll love!
Look like you’ve found
your Fantastic!

Read through the instructions carefully
before you begin.
Make sure you have all the required tools.
Never use power tools unless instructed.
Identify and lay out all of the components
before you begin assembly.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
rostnenopmocruoyegamadnacyehT.detcurtsniyllacfiicepssselnuslootrewopesureveN!
hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
.rehtegotgnolebstrapehttahtniatrecerauoylitnueulgynaesureveN!
rofetisbewrolebaleractcudorpehtkcehC.srenetsafllanethgit-erdnakcehcyllacidoireP!
product care instructions.
!
components please visit our website Help
Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
fantasticfurniture.com.au Page 3
Assembly checklist
Useful Information

Page 4
What you need
to assemble the product
Please make sure you have all these parts before you start.
fantasticfurniture.com.au
(H3) (H4)
Box 2:
1 x Back Guardrail (P5);
1 x Front Guardrail (P6);
1 x Front Side Rail (P7);
1 x Back Side Rail (P8);
1 x Ladder (P10);
Box 3:
6 x Mesh Panels (P9).
Hardware pack
1 x Head oard Upper (P2)
36 x
Bolts (H2)
M6x20
24 x Short Bolts
(H1)
M6x16 M6x50 M6x18
(H6)
8 x Leg Plastic Pads

Attach the back guard rail (P5) and front guard rail (P6) to 3 x mesh panels (P9) with 12 x hort
bolts (H1) and 12 x hex nuts (H4), tighten with allen key (H5) as shown.
Page 5
Step 1
Attach the front side rail (P7) and back side rail (P8) to 3 x mesh panels (P9) with
12 x short bolts (H1) and 12 x hex nuts (H4), tighten with allen key (H5) as shown
fantasticfurniture.com.au
Step 2
(H5)

Page 5
Step 3
You will need
Insert 4 x bolts (H2) into the bottom holes of the headboard/footboard
lower (P3) using the allen key (H5). Do not fully tighten the bolts and leave a gap of
5mm as shown.
fantasticfurniture.com.au
Insert 4 x bolts (H2) into the bottom holes of the headboard/footboard
upper (P1 & P2) using the allen key (H5). Do not fully tighten the bolts and leave a
gap of 5mm as shown.
Step 4
You will need
4 x
Bolts
M6x20
M6x20
(H2)
5mm
(H2)
5mm

Step 6
Page 6fantasticfurniture.com.au
Step 5
Attach the headboard and footboard upper (P1 & P2) the front g ardrail (P6) and back
gardrail (P5 4 x bolts (H2)
the allen key (H5).
Insert 3 x long bo ts (H3) into the top holes of headboard (P1) and (P2) with the allen key (H5).
Attach the 2 x headboard/footboard lower (P3) to the front side rail (P7) and back side rail
(P8) onto the lower bolts first then insert 4 x medium bolts (H2) into the top holes
with the allen key (H5).
You will need
You will need
(H5)
(H5)
M6x20
M6x20
3 x Long Bolts
(H3)
M6x50

First slot on the 4 x mid posts (P4) onto the posts of the headboard/footboard lower panels (P3).
Insert 8 x bolts (H2) into the mid post an tighten with the allen key (H5).
Then carefully lift and position the upper bed above the lower bed. that the two holes of the
upper bed and lower bed are on the same side. Put the upper bed into position.
Then insert 8 x bolts (H2) into the mid posts and tighten with the allen key (H5) to lock the bunk
into position.
Note: Postion of hole for ladder
Step 8
Page 7
Attach the ladder (P10) to the bunk with 4 x bolts (H2), tighten with
the allen key (H5).
fantasticfurniture.com.au
Step 7
(H2)
(H5)
(H2)
(H2)
(H5)

IMPORTANT: Fully tighten all bolts on bed. Periodically check to ensure all bolts remain tight.
Step 9
Note: In the future if you require two single beds, the bunk can be disassembled. Remember
to remove the mid posts (P4) from the bottom bed and insert the spare leg plastic pads (H6)
as shown.
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
fantasticfurniture.com.au Page 8
H6
H6
H6
H6
H6
H6
H6
H6