studioduc indi full User manual

indi toddler rail
a how-to guide that won’t leave you in tears
ASSEMBLY INSTRUCTIONS

parenting is hard.
this is easy.
no really, it is.
MADE HERE™
MADE SAFE MADE SMART
MADE WELL™

want to watch this assembly IRL?
(acronym challenged? that means “in real life”.)
open the camera on your phone and place it over the
QR code below to see our NYC studio dream team do all
the heavy lifting (just kidding, there is none!)
or go to ducducnyc.com/pages/assembly-instructions

thank you for selecting a
studio duc product!

Please check contents against the components list in these instructions. Also,
please ensure there was no damage that may have occurred in shipping.
If any components are missing or you find any damage, please contact ducduc
before continuing.
Read all the instructions before use of the toddler bed/crib.
Please remember to securely tighten all bolts and fasteners, and periodically check
to make sure every component is properly and securely in place and all bolts and
fasteners are tight.
Pay close attention to the safety warnings in these instructions and on toddler bed/
crib labels.
CARE AND CLEANING:
Do not scratch or chip the finish. Do not use abrasive chemicals for cleaning. Clean
with mild soap on a soft rag. Rinse and dry thoroughly. If you ever re-finish this
furniture, be sure to use only a non-toxic finish.
Do not attempt to move this toddler bed/crib alone- dragging or sliding across a
floor may cause structural damage. A minimum of two people is required to safely
lift and reposition the toddler bed/crib.

The minimum age can’t be less than 15 months; and the maximum weight can’t
be higher than 50 lb.
This toddler bed rail is only for use with the indi crib from studio duc, and is not
designed, intended or approved for use with any other crib
WARNING
!
Failure to follow these warnings and the assembly instructions could result in serious
injury or death.
Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE.
Infants can suocate on soft bedding. Never add a pillow or comforter. Never place
additional padding under infant.
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their
backs to sleep, unless otherwise advised by your physician.
STRANGULATION HAZARD:
Strings can cause strangulation! Do not place items with a string around a child’s neck,
such as hood strings or pacifier cords. Do not suspend strings over a crib or attach
strings to toys.
To help prevent strangulation tighten all fasteners. A child can trap parts of the body
or clothing on loose fasteners.
DO NOT place crib near window where cords from blinds or drapes may strangle a
child.
FALL HAZARD:
When child is able to pull to a standing position, set mattress to lowest position and
remove bumper pads, large toys and other objects that could serve as steps for
climbing out.
Stop using crib when child begins to climb out or reaches the height of 35 in. (89 cm.).
Check this product for damaged hardware, loose joints, loose bolts or other fasteners,
missing parts, or sharp edges before and after assembly and frequently during use.
Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are
missing, damaged or broken. Contact ducduc for replacement parts and instructional
literature if needed. DO NOT substitute parts.
If refinishing, use a non-toxic finish specified for children’s products.
Follow warnings on all products in a crib.
Never use plastic shipping bags or other plastic film as mattress covers because they
can cause suocation.
Infants can suocate in gaps between crib sides and a mattress that is too small.

WHAT’S IN THE BOX:
EXISTING PARTS:
D
side rail
E
mattress panel
A
indi toddler rail
G (x4)
mattress support pin
H (x4)
mattress support bolt
J (x4)
5/16” flat washer
I (x4)
5/16” locking washer
B
hammer cap
F
assembled
indi crib base
C
assembled
indi crib upper

WHAT YOU’LL NEED:
20 minutes
(or less)
2 people
plus a dog for moral support
(unless you’re a cat person)
household hammer or
rubber mallet
a soft surface to assemble on
(like a rug or some of the corrugate
box your piece arrived in)
phillips head screwdriver

use a phillips screwdriver to unscrew all mattress support bolts (H) from mattress panel (E).
remove locking washers (I) and flat washers (J) and set all hardware aside for use later.
1
still confused? scan this code to watch the assembly video!

remove mattress panel (E) and set aside for use later.
2
still confused? scan this code to watch the assembly video!

3remove mattress support pins (G) and set aside for use later.
still confused? scan this code to watch the assembly video!

apply hammer cap (B) to the head of a household hammer. have a friend firmly hold on to
the assembled indi crib upper (C) and side rail (D) while you tap the assembled crib base (F)
with hammer and hammer cap (B). when the assembled indi crib upper (C) is fully detached
from the assembled indi crib base (F), gently place both parts on the floor.
4
still confused? scan this code to watch the assembly video!

5starting at one side of side rail (D), use one hand to firmly hold the assembled indi crib upper
(C) in place while pulling up on the side rail (D) to unlock the connection. repeat on the
opposite end to fully detach side rail (D).
still confused? scan this code to watch the assembly video!

6insert connectors on toddler rail (A) into slots on assembled indi crib upper (C). push down
at the connections to lock into place.
important!
be sure the toddler rail
bottom is flush with the
base of the assembled
crib upper.
still confused? scan this code to watch the assembly video!

with a friend, gently lift the assembled indi crib upper (C) and toddler rail (A) and set on top
of the assembled crib base (F) making sure the connectors line up with the holes. once
everything is aligned, use hammer with hammer cap (B) to tap until secure.
7
8
set the assembled crib base (F) as shown in the area where the crib will remain.
still confused? scan this code to watch the assembly video!

9insert 4 mattress support pins (G) into holes on assembled indi crib upper (C) and toddler
rail (A) as shown. make sure all mattress support pins (G) are located at the same height at
all 4 corners.
A
G
still confused? scan this code to watch the assembly video!

10 place mattress panel (E) into the assembled crib so each mattress support pin (G) is
inserted into a hole.
still confused? scan this code to watch the assembly video!

11 place flat washer (J) and locking washer (I) on top of mattress support pin (G) as shown.
then, use a philips head screwdriver and mattress suport bolt (H) to secure into place.
repeat on all 4 sides.
E
AH
J
I
G
still confused? scan this code to watch the assembly video!

yippee! you did it!
give yourself a pat on the back, take a bow,
or go house a pint of ice cream…we don’t judge.

prefer to talk to a human instead?
we’re here for you!
contact our customer advocate team below:
212.226.1868
live chat at
ducducnyc.com
200 lexington, no. 1201
ny, ny 10016
[e-mail]