Studiomaster MULTI 6 User manual
MULTI 6
1. Introduction
2. Features at Glance
3. Front & Rear Panel Description
4. Operating Modes
5. Technical Specifications
Index:
BAL PANBAL PANBAL PANBAL PANBAL PANBAL PAN
6
5
4
3
21
-24 -24-12 -12
0 0+6 +6 -24 -18 -12 -6 0+6 +12 +18 -24 -24 -24 -24 -24
-18 -18 -18 -18 -18
-12 -12 -12 -12 -12
-6 -6 -6 -6 -6
0 0 0 0 0
+6 +6 +6 +6 +6
+12 +12 +12 +12 +12
+18 +18 +18 +18 +18
POWER
MAIN INPUT LEVEL MAIN OUTPUT LEVEL LEVEL LEVEL LEVEL LEVEL LEVEL
SPLITTER MIXER
SPLIT
MIX
MODEMAIN LINK
SPLIT
MIX
MODE
SPLIT
MIX
MODE
SPLIT
MIX
MODE
SPLIT
MIX
MODE
SPLIT
MIX
MODE
OUT
IN
0
+15
∞
-
LEVEL
0
+15
∞
-
0
+15
∞
-
0
+15
∞
-
0
+15
∞
-
0
+15
∞
-
0
R
L
0
R
L
0
R
L
0
R
L
0
R
L
0
R
LMULTI 6
0
+15
∞
-
0
+15
∞
-
BALANCED
OUTPUT INPUT
3
BALANCED
OUTPUT INPUT
2
BALANCED
OUTPUT INPUT
1
BALANCED
MAIN OUT L
R
BALANCED
MAIN IN L
R
BALANCED
OUTPUT INPUT
4
OUTPUT OUTPUT
INPUT INPUT
BALANCED BALANCED
5
6
MADE IN P.R.C.
230V~50Hz, T500mA, 250V
Splitter + Mixer
In case an abnormality occurs during operation
contact your dealer. If you continue using the unit without heed-
ing this instruction, fire or electrical shock may result.
Should this unit be dropped or the cabinet be damaged, turn the
power switch off, remove the power plug from the AC outlet, &
If you notice any abnormality, such as smoke, odor, or noise, or
if a foreign object or liquid gets inside the unit, turn it off imme-
diately. Remove the power cord from the AC outlet. Consult your
dealer for repair. Using the unit in this condition is a fire and
electrical shock hazard.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the pre-
sence of important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT NOTICE
Connecting the Plug and Cord
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
WARNING: THIS APPARATUS MUST BE EARTHED
IMPORTANT. The wires in this mains lead are coloured in accordance
with the following code:
GREEN: EARTH
BLUE: NEUTRAL
BROWN: LIVE
As the colours of the wires in the mains lead of this apparatus may not
correspond with the coloured markings identifying the terminals in your
plug proceed as follows:
The wire which is coloured GREEN must be connected to the terminal in
the plug which is marked by the letter E or by the safety earth symbol
or colored GREEN.
The wire which is coloured BLUE must be connected to the terminal which
is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal
which is marked with the letter L or coloured RED.
1 Read the instructions carefully.
2 Keep this instructions manual handy for reference.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
10 Only use attachments/accessories specified by the
manufacturer.
11 Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
12 Unplug this apparatus during lightning storms or when unused
for long periods of time.
13 Refer all servicing to qualified service personnel. Servicing in
any way, such as power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the appara-
tus, the apparatus has been exposed to rain or moisture. does
not operate normally, or has been dropped.
WARNING
Operation
Do not scratch, bend, twist, pull, or heat the power cord. A
damaged power cord is a fire and electrical shock hazard.
Do not remove the unit’s cover. You could receive an electrical
shock. If you think internal inspection, maintenance, or repair
is necessary, contact your dealer.
If lightning begins to occur, turn off the unit as soon as possible,
and unplug the power cable from the electrical outlet.
If there is a possibility of lightning, do not touch the power cable
plug if it is still connected. Doing so may be an electrical shock
hazard.
Installation
Connect this unit’s power cord only to an AC outlet of the type
stated in this Owner’s Manual or as marked on the unit. Failure
to do so is a fire and electrical shock hazard.
Do not allow water to enter this unit or allow the unit to become
wet. Fire or electrical shock may result.
Do not place a container with liquid or small metal objects on
top of this unit. Liquid or metal objects inside this unit are a fire
and electrical shock hazard.
Do not place heavy objects, including this unit, on top of the
power cord. A damaged power cord is a fire and electrical
shock hazard. In particular, be careful not to place heavy
objects on a power cord covered by a carpet.
PRECAUTIONS FOR SAFE OPERATION
Do not modify the unit. Doing so is a fire and electrical shock
hazard. 2
1. Introduction
Thank you for buying the Studiomaster Professional Multi 6 Splitter + Mixer.
To ensure maximum performance and safety, please follow this instruction manual carefully.
Please retain this manual for future reference. For any complaint, feedback or testimonials please contact our distributor/dealer.
Retain the cartons for future use should the product require servicing/maintenance.
2. Features at Glance
• 8 Balanced input + 8 Balanced Outputs.
• Each channel is provided with SPLIT/ MIX mode switch , Level control, Bal / PAN control & LED Bargraph.
• Main IN /OUT is provided with level controls, Link switch & LED Bargraph.
• Main as well input 1-4 are Balanced XLR Input.
• Input 5-6 are balanced 6.3” TRS Jack Input
• Main as well as output 1-4 are balanced XLR Output.
• Output 5-6 are balanced 6.3” TRS Jack Output.
• All switches with LED status indicator:
• 4 Operating Modes:
1. Mode 1: 2 In - 6 Out 2. Mode 2: 6 In - 8 Out
3. Mode 3: 3 In - 8 Out 4. Mode 4: 8 In - 8 Out
3. Front & Rear Panel Description
Front Panel
1
1. Main Input Level Control: This control adjust the input level. In split mode this control determines the signal
level for all Mono Output.
2. Main Input Level Meter: This 4 LED Level meter indicates input signal level.
3. Main Output Level Control: This control adjust the output level going to main output connectors.
• In link Mode when input is given to Main In.
• In Mix Mode when input is given to input 1 - 6 channel.
4. Main Output Level Meter: This 4 LED level meter indicates out signal level of Main output.
5. Main Link Switch: When it is pressed, Main IN is routed to Main out.
6. Mode Switch (1-6): This switch selects split or Mix mode.
7. Level Control (1-6): This control adjust individual channel level. In split mode it controls level of individual channel
out, where as in Mix mode it decides level going to Main out.
8. Balance / PAN Control (1-6):
• This control sets the balance between Left & Right signal.
• In Split Mode it acts as balance where as In Mix Mode it acts as PAN.
9. Channel Level Meter (1-6): This 8- LED level meter indicates output signal of each respective channel.
10. Power: Main On / Off Switch to Power On Unit.
BAL PANBAL PANBAL PANBAL PANBAL PANBAL PAN
6
5
4
3
21
-24 -24-12 -12
0 0+6 +6 -24 -18 -12 -6 0+6 +12 +18 -24 -24 -24 -24 -24
-18 -18 -18 -18 -18
-12 -12 -12 -12 -12
-6 -6 -6 -6 -6
00000
+6 +6 +6 +6 +6
+12 +12 +12 +12 +12
+18 +18 +18 +18 +18
POWER
MAIN INPUT LEVEL MAIN OUTPUT LEVEL LEVEL LEVEL LEVEL LEVEL LEVEL
SPLITTER MIXER
SPLIT
MIX
MODEMAIN LINK
SPLIT
MIX
MODE
SPLIT
MIX
MODE
SPLIT
MIX
MODE
SPLIT
MIX
MODE
SPLIT
MIX
MODE
OUT
IN
0
+15
∞
-
LEVEL
0
+15
∞
-
0
+15
∞
-
0
+15
∞
-
0
+15
∞
-
0
+15
∞
-
0
R
L
0
R
L
0
R
L
0
R
L
0
R
L
0
R
LMULTI 6
0
+15
∞
-
0
+15
∞
-
3678
254910
3
17
Rear Panel
11. Main In: These are main audio balanced XLR, Input Connectors.
12. Main Out: These are main balanced XLR, Output Connectors.
13. Channel Input (1-4): These are individual channel balanced XLR Input Connectors.
14. Channel Output (1-4): These are individual channel balanced XLR Output Connectors.
15. Channel Input (5-6): These are individual channel balanced 6.3” TRS Jack socket Input Connectors.
16. Channel Output (5-6): These are individual channel balanced 6.3” TRS Jack socket Output Connectors.
17. Mains Inlet: It accepts Mains cord for connecting AC Mains.
16 15 14 13 12 11
BALANCED
OUTPUT INPUT
3
BALANCED
OUTPUT INPUT
2
BALANCED
OUTPUT INPUT
1
BALANCED
MAIN OUT L
R
BALANCED
MAIN IN L
R
BALANCED
OUTPUT INPUT
4
OUTPUT OUTPUT
INPUT INPUT
BALANCED BALANCED
5
6
MADE IN P.R.C.
230V~50Hz, T500mA, 250V
4. Operating Modes:
4
Mode 1
(2 In - 6 Out)
Mode 2
(6 In - 8 Out)
Mode 3
(2 In - 8 Out)
Mode 4
(8 In - 8 Out)
Link Switch Mode Switch
Main Left & Main Right
Output 1 to Output 6 + Main Left
Mix output & Main Right Mix Output
Mode Switch Position Input Output
Released
Pressed
Released
Pressed
Released
Released
Pressed
Pressed
Output 1 to Output 6
Output 1 to Output 6 + Main Left
Mix output & Main Right Mix Output
Output 1 to Output 6 +
Main Left/Right Output
Main Left & Main Right
+ Input 1 to Input 6
Main Left & Main Right
Input 1 to Input 6
5
Mode 1 : 2 In - 6 Out
Mode 2 : 6 In - 8 Out
S
S
M
S
MS6
6
6
6
6
S
S
M
S
M
S6
6
6
6
6
6
Mode 3 : 2 In - 8 Out
Mode 4 : 8 In - 8 Out
6
6
Link
Link
S
M
S
M
S6
S1
Link
66
S
6
M
S
M
S
M
S
M
S6
S1
Input Output Levels
6. Technical Specification:
Model MULTI 6
Input Connector Main Left / Right = Balanced XLR Connector
Input 1 - 4 = Balanced XLR
Input 5 - 6 = 6.3” TRS Jack
7
Net Weight (Kgs.) 2.4Kg
Dimensions (W x D x H in mm) 483 x 462 x 44.5mm
12 W Max
T500mA / 250V
Power Consumption
Fuse Rating
Power Supply
-80dB
230 V / 50Hz
Signal to Noise Ratio
Total Harmonic Distortion
Frequency Response
Main Output (Nominal/Max)
Input Impedance
Input Sensitivity
Output Connector
< 0.025%
[ ± 0.5dB] 20Hz to 20KHz
0dBu (0.775V RMS) / +20dBu (7.75V RMS) Max
20KΩ Balanced/10KΩ UnBalanced
0dBu (0.775V RMS) / +20dBu (7.75V RMS) Max
Main Left / Right = Balanced XLR Connector
Output 1 - 4 = Balanced XLR
Output 5 - 6 = 6.3” TRS Jack
* Design and specification are subject to change without notice.
is a registered trademark of Audioplus in India. © Copyright Audioplus, 2008. All rights reserved. Any
unauthorised reproduction or use of logos, images or design elements is strictly prohibited by law. No part of the
compilation may be reproduced in any manner or translated without written permission.
A1/A2, Giriraj Industrial Estate, Mahakali Caves Road, Andheri (East), Mumbai - 400 093. India
Tel.: 022-42869000 / 001 / WhatsApp.: +91-8879028079 E info@audioplus-india.com
W www.audioplus-india.com / www.studiomasterprofessional.com
Rev000/SM MULTI6/OCTOBER 2017
Range of Studiomaster Professional Products.
~ DJA Series
DJA 800
DJA 1600
DJA 2500
DJA 3200
DJA 4000
DJA 5000
~ Arena Series
Arena 20
Arena 30
~ Industrial Amplifier
ARC 120A
ARC 240A
ARC 120UB
ARC 240UB
~ S-Series
SWF 18120
SWF 18140
SWF 18100
SWF 1880
SWF 1560
SMB 1565
SMB 1545
SMB 1530
SMB 1250
SMB 1230
SMB 1220
SHF 0104
SHF 0106
SHF 0210
~ E-Series
EMB 1225
EMB 1530
EMB 1535
~ TITAN Series
TWF 2115
TWF 1815
TWF 1810
TWF 1580
TWF 1570
TMB 1555
TMB 1535
THF 0208
~ FURY Series
F18.120
F15.70
F15.40
F15.50X
F15.40X
F12.30X
~ S-Series
S5225
S8018
S8118
S8128
S8028
~ Fire Series
Fire 21/ Fire 51
Fire 51A
Fire 55
SM 100XLR
TRIO 100
SM 200XLR
TRIO 200
SM 300I
SM 400XLR
SM 450XLR
SM 500XLR
SM 600XLR
SM 650XLR
SM 800C
SM 900C
SBM 10
Flex 3
Flex 4
BR 28 Series
BR 48 Series
ER 11 Series
ER 31 Series
ER 58 Series
TR 47 Series
XR 20 Series
XR 40 Series
XR 80 Series
XR 100 Series
Vak 10 System
Vak 10d / Vak 10c
Vak 20
Vak 30
Vak 30d / Vak 30c
SX-2
SX-321
SX-341
SEQ 152
SEQ 302F
SEQ 312
Multi 3 / Multi 6
SFX 8
SPS 8
SDX 4
Phantom 11
~ Mini Series
Mini 6
Mini 6U
~ Air Series
AiR 2
AiR 4
AiR 6
AiR 8
AiR 12
AiR 16
AiR 2U
AiR 4U
AiR 6U
AiR 8U
AiR 12U
AiR 16U
~ Fire Series
Fire 57
Fire 82
Fire 84
~ XVP Series
XVP 1540
XVP 2550
XVP 2585MK2
XVP 25A6
XVP 1808
XVP 1810
XVP 2820
~ ELAN Series
ELAN 151
ELAN 155
ELAN 181
EKS 151
Q 400
~ ARIA Series
Aria 8
Aria 12
Aria 15
~ A Series
A 400
A 500
~ H Series
H 400
H 510
~ B Series
B 200
B 400
B 410
~ OP Series
OP 415
OP 515
~ SUB Series
12SUB
15SUB
FIRE 92
SLA-40 T
SLA-40 Kit
SLA 30
S 9022
SVC - S1000
SVC - S2000
SVC - S3000
SVC - S5000
SVC - S8000
SVC - S10000
SVC - S12000
Wired Microphones
Wireless Microphones
Conference System
Processors
Mixers
Passive Speakers Stabilizers
Speaker Component
Line Array System
Powered Speaker
Crossovers
Mixers
AiR Pro 18
AiR Pro 24
AiR Pro 28
AiR Pro 36
~ AQUA Series
Aqua 6
Aqua 8
Aqua 10
Aqua 14
~ Digital Mixer
D. Mix 20
~ Diamond Club Series
Diamond Club 6.2
Diamond Club 8.2
Diamond Club 8.2 EFX
Diamond Club 12.2
Diamond Club 12.2EFX
Diamond Club 12.2UX
Diamond Club 16.2
Diamond Club 16.2EFX
~ Diamond Supreme Series
Diamond Supreme 12
Diamond Supreme 12U
Diamond Supreme 16U
~ Club 2000 Series
Club 2000 142
Club 2000 182
~ Platinum Series
Platinum 16Fx
~ Diamond Pro-3 Series
Pro-3 12.3
Pro-3 16.3
~ DJ Mixers
DJX 300
DJX 325
Playmix 300
DJX 825
DJX 925
DJX 975
~ P - Series
PA 1.5
PA 2.0
PA 3.0
PA 4.5
PA 6.0
PA 7.5
~ DPA Series
DPA 2000
DPA 3200
DPA 4500
DPA 5000
~ DJA Series
DJA 100
DJA 500
Amplifiers
Passive Speakers
Table of contents
