Controls & Features - Front Panel
Output section
30 PLAYBACK sockets
RCA phono sockets for the connection of unbalanced signals from 2
track playback equipment such as mp3, CD players. See section 33
for the associated routing buttons.
31 STEREO AUX INPUT sockets
Two ¼” TRS jack sockets for balanced or unbalanced stereo line level
signals. For mono operation use only the LEFT input. See section 34
for the associated controls.
Can be wired for balanced or unbalanced use.
32 MON SEND socket
¼” TS jack unbalanced output of theAUX signal. Note when a jack
plug is connected the signal is cut to the on board DSP. This output
would normally be used when an external effects processor is
required.
33 AUX SEND socket
¼” TS jack unbalanced output of the AUX signal. Note when a jack plug is
connected the signal is cut to the on board DSP. This output would normally
be used when an external effects processor is required.
34 PLAYBACK controls
a) LISTEN - Allows the incoming signal from the PLAYBACK input to
be monitored at the PHONES/CONTROL ROOM output and left-right
bargraph.
b) Routes the incoming signal from the PLAYBACK input to the MAIN
MIX. The music source could be checked using the LISTEN button
and then routed to the main mix when required.
35 STEREO AUX INPUT controls
a) LEVEL control. Adjusts the level of the music source connected to
the STEREO AUX INPUT.
b) BAL control. Adjusts the balance of the stereo signal between the
left & right MAIN MIX. In the centre position the signals to the MAIN
MIX are equal. When the channel is used with a mono signal the BAL
control works like a PAN control.
c) LISTEN - Allows the incoming signal from the STEREO AUX
INPUT to be monitored at the PHONES/CONTROL ROOM output and
left-right bargraph.
The LISTEN switch operates independently of the LEVEL control.
36 AUX/DSP RETURN TO MAIN MIX
Adjusts the output signal of the on board DSP to the left-right MAIN
MIX output. If jack plugs are connected to the AUX RETURN input
sockets, the signal from the DSP is cut. This allows an external signal
source, say from an effects processor, to be connected overriding the
on board DSP.
37 AUX RETURN INPUT socket
¼” TS jack unbalanced stereo input. See item 35 for details.
38 ALT 3-4 OUTPUT socket
¼” TRS jack balanced output socket.
Can be wired for balanced or unbalanced use.
30
31
32
36
37
38
33
34a
35a
35b
35c
34b
LISTEN
TO MAIN MIX
PLAYBACK
L
R
R
PLAYBACK
RECORD
STEREO AUX INPUT
MON SEND AUX SEND
MONO
L
LR
0 10
STEREO AUX INPUT
LISTEN
BAL
LEVEL
0 10
AUX / DSP
RETURN
TO MAIN MIX
LEVEL
LR
LR
ALT 3-4 OUTPUT
AUX RETURN
