Sub-Zero 700BC User manual

Integrated refrigeration can be used
anywhere in the home. It merges
seamlessly into the décor, with no visible
hinges or grilles. Model 700BC(I) offers
refrigerator storage in the upper drawer
with freezer storage in the lower drawer.
Two temperature zones ensure the
freshest food and energy efficiency.
Model 700BCI features an automatic
ice maker.
Model 700BC(I)
Integrated
Refrigerator/Freezer Drawers
Features
Integrated design blends invisibly into
custom cabinetry
Microprocessor offers precise temperature
control
Electronic digital controls
Flat-to-the-ceiling bright interior lighting
Open drawer alarm
Automatic ice maker (Model 700BCI)
Meets strict Department of Energy
requirements
This appliance is certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
Model Options 700BC 700BCI
Design Integrated Integrated
Automatic Ice Maker
Stainless Steel Panels Classic Platinum Carbon
Model 700BC(I)
Accessories
Stainless steel drawer panels with
tubular handles available in three finishes
(see chart above for specifics)
Polished chrome handles for custom
panel applications
Dozen egg container with lid
Dual installation heater kit
Accessories are available through your Sub-Zero
dealer. To obtain local dealer information, visit the
Locator section of our website, subzero.com.
Interior Features
Refrigerator
Upper Storage Drawer
Independent Temperature Zone
Removable Crisper Cover
Freezer
Lower Storage Drawer
Independent Temperature Zone
1 Removable Drawer Divider (700BC)
Automatic Defrost
Automatic Ice Maker (700BCI)
Classic CarbonPlatinum

Installation Notes
Stainless steel drawer front panels with
handles are available as accessories. These
panels are not installed at the factory.
Complete installation specifications, including
panel sizes, can be found on our website,
subzero.com.
Unit dimensions may vary by ±
1
/ 8 ".
Specifications
Overall Width 27"
Overall Height 341/2"
Overall Depth 24"
Drawer Clearance 191/2"
Refrigerator Capacity 2.9 cu ft
Freezer Capacity 2.1 cu ft
Opening Width 27"
Opening Height 341/2"
Opening Depth 25"*
Electrical Requirements 115 V AC, 60 Hz
15 amp dedicated circuit
Plumbing Requirements 1/4" OD copper line
(Model 700BCI) 20–100 psi
Annual Energy Usage $41**
Shipping Weight 190 lbs
*Depth is 24" from the front of the unit to its back.
Your design may necessitate moving the unit
back, or cabinets forward to achieve a flush fit.
This will require a minimum opening depth of 25".
**Based on 9.06 cents per kilowatt hour.
ANTI-TIP
BRACKET*
*PLACEMENT OF THE
ANTI-TIP BRACKET
SHOULD BE 24" (610)
FROM THE FRONT OF THE
UNIT WITHOUT PANELS
TO THE BACK OF THE
ANTI-TIP BRACKET.
25"
(635)
27"
(686)
34
1
/ 2 "
(876)
27"
(686)
25"
(635)
WATER LINE
BOTTOM ENTRY
LOCATION
WATER LINE
SIDE ENTRY
LOCATIONS
11/2"
(38)
11/2"
(38)
27"
(686)
11/2"
(38)
151/2"
(394)
9"
(229)
131/2"
(343)
131/2"
(343)
ANTI-TIP
BRACKET
6"
(152)
T
O
P VIEW T
O
P VIEW
SIDE VIEWFRONT VIEW
WATER LINE
SIDE ENTRY
LOCATION
ANTI-TIP
BRACKET
NOTE: ANTI-TIP BRACKET MUST BE INSTALLED TO
PREVENT UNIT FROM TIPPING FORWARD
41/2"
(114)
21/2" (64)
151/2" (394)
3/4"
(19)
3"
(76)
1/4"
(6)
13" (330) 9"
(229)
ANTI-TIP
BRACKET
LOCATE WATER LINE
(REAR ENTRY) WITHIN
SHADED AREA
LOCATE ELECTRICAL WITHIN
SHADED AREA – ORIENT GROUND
PRONG TO RIGHT AS SHOWN
Installation Specifications
Overall Dimensions
Model 700BC(I)
Integrated
Refrigerator/Freezer Drawers
DRAWER
MOUNTING DETAIL
34
1
/ 2 "*
(876)
93/4"
(248)
4"
(102)
FRONT VIEW SIDE VIEW
3/8"
(10)
131/4"
(337)
1/2"
(13)
101/4"
(260)
203/8"
(518)
27"
(686)
24"
(610)
(UNIT DIMENSION) (UNIT DIMENSION)
*
1/2"
(13) +
_ADJUSTMENT IN LEVELING LEGS
*
DRAWER PANEL THICKNESS NOT INCLUDED
DRAWER CLOSED
191/2"*
(495)
24"
(610)
257/8" (657)
TOP VIEW
Dimensions in parentheses are in
millimeters unless otherwise specified.
Models without an ice maker
will not require the water line
connection.