SUGR Cube User manual

SUGR Cube Exterior
MIC
Switch/Volume Control Knob
Indicator LED
Vent Tube Hole
Reset Button
Micro-USB Power Supply Port
SUGR Cube
www.sugrsugr.com

Download SUGR Cube App
Please search 'sugr cube' in Apple App Store or Google Play.
sugr cube
sugr cube
sugr
14:20
GET
sugr cube
sugr cube
sugr
14:20
Installation
2: Make sure your cell phone is connected to Wi-Fi.
Wi-Fi
Wi-Fi
Your Wi-Fi
14:20
1: Turn the knob of Cube, so the indicator points to the 10 o'clock position.
* Please charge Cube if the LED on knob is off.
Setup Cube Wi-Fi
iOS Android
*Please get latest Android app at
https://fir.im/xux5

Wi-Fi Configuration Success
Once Cube voices 'Connected', bingo, Wi-Fi configuration success.
3: Open SUGR Cube App, tap 'I have Cube' button.
Find Out
I have Cube
4: Enter your Wi-Fi password, then tap 'NEXT' button.
Your Wi-Fi
Wi-Fi Password
14:20
5：Tap 'Connect' button, chirp sound will come from your cell phone. Face the
speaker of cell phone to the MIC of Cube.

A: It means Wi-Fi configuration failed if Cube voices 'Connect fail'.
You may re-enter Wi-Fi password and redo 'chirp' procedure.
B: You may follow below steps if Cube has no response in 'chirp' procedure.
1: Make sure Cube is powered on
* Check whether the LED on knob is on, please charge Cube if not.
2: Check whether the speaker of cell phone is facing to the MIC of Cube while doing 'chirp'.
3: Try to restart Cube then redo 'chirp' procedure.
4: Please refer to FAQ on www.sugrsugr.com for more answers.
Also you can mail [e-mail] to get engineers' professional support.
Wi-Fi Configuration Fail
SUGR Cube Operating Guidance
* More motion controllings will be available in future, please check website: www.sugrsugr.com
Tap the top surface of Cube for PLAY / PAUSE.
Tilt Cube left 45°~60° for PREVIOUS.
Tilt Cube right 45°~60° for NEXT.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
Sugr Cube User Guide
Go to www.sugrsugr.com/support.
Safety and Handling
See “Safety, Handling, & Support” in the Sugr Cube User Guide.
Battery
The lithium-ion battery in Sugr Cube should NOT be replaced and must be recycled or
disposed of separately from household waste.
Avoiding Hearing Damage
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Sugr warrants the included hardware product and accessories against defects in
materials and workmanship for one year from the date of original retail purchase.
Sugr does not warrant against normal wear and tear, nor damage caused by
accident or abuse. To obtain service, contact Sugr. International shipping charges
may apply.
Sugr Cube Info
Sugr One-Year Limited Warranty Summary FCC Compliance Statement

方糖音箱使用手册
www.sugr.fm
This equipment is in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Use the Digital Signage in the environment with the temperature between 0°C and 40°C.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Adapter shall be installed near the equipment and shall be easily accessible.
Important
Changes or modifications to this product not authorized by
Sugr could void the electromagnetic compatibility (EMC) and wireless
compliance and negate your authority to operate the product. This product
has demonstrated EMC compliance under conditions that included the
use of compliant peripheral devices and shielded cables between system
components. It is important that you use compliant peripheral devices and
shielded cables between system components to reduce the possibility of
causing interference to radios, televisions, and other electronic devices.
© 2015 Sugr Electronics Corp. All rights reserved.
Sugr, the logo are trademarks of Sugr Electronics Corp. registered in the U.S. and China.
R&TTE NB Compliance Statement

方糖音箱部件
麦克风
开关／音量调节旋钮
LED指示灯
倒相管
复位按钮
Micro-USB 充电接口
下载 SUGR Cube App
方糖音箱Wi-Fi配置指南
iOS Android
扫码下载 APP 扫码下载 APP

准备工作: 请确保手机已经接入家中 Wi-Fi
Wi-Fi
Wi-Fi
Your Wi-Fi
14:20
准备工作: 拧开方糖音箱背部旋钮开机
* 如果发现旋钮上的 LED 灯没有亮，请先充电
准备工作：打开 Sugr Cube的App，选择“我有 Cube”
了解
我有Cube
开始设置: 输入你的 Wi-Fi 密码，然后点击“下一步”
Your Wi-Fi
Wi-Fi 密码
14:20

Wi-Fi 连接成功
当听到 “Connected” 提示音，表示联网成功，祝贺你！
声波通信传密码：按“连接”按钮 ，听到“滴滴滴”的声音
此时将 iPhone 喇叭靠近方糖旋钮上部的麦克风孔。
A: 如果听到 “Connect fail'”提示音，表示连接失败，请重试上面的步骤
B: 或者采用下面的操作排除问题
Wi-Fi 连接失败
1: 确保方糖已经开机
2: 请确保手机喇叭靠近方糖背板旋钮上方的麦克风孔（如图示）
3: 请尝试用旋钮重启方糖音箱，再进行配置
4: 欢迎联系 [e-mail] 获取技术支持

方糖音箱操作指南
*更多的触控操作将会陆续发布，请关注我们的官网 www.sugr.fm 以获得最新消息
轻拍顶部 播放／暂停音乐
向左倾斜音箱45°~60° 播放前一曲
向右倾斜音箱45°~60° 播放后一曲
Sugr （深圳米唐科技有限公司）对本产品的硬件提供一年保修：
为期壹（一）年的保证，由原来零售采购日期算起。
此项保证不适用于：
（1）因意外、滥用、不当使用、误用或非米唐产品所导致的损坏。
（2）因非米唐授权服务提供商的任何人士进行的服务（包括提升与扩充工作）所导致的损坏。
（3）任何在未获得米唐书面许可的情况下被修改的产品或零件。
（4）消耗性或耗用性的产品或零件。
（5）您不是从米唐授权转售商处采购的产品或零件。
（6）自然灾害及人力、战争等不可抗力因素所造成的损坏。
另：国际用户需承担因维修所产生的运费。
方糖音箱保修服务

方糖音箱用户手册
请前往 www.sugr.fm 查看
使用和处理方糖音箱
请勿摔落、拆解、打开、挤压、扳折、戳刺、扯裂、微波或涂色您的方糖音箱，也不要使其变形或插异物。
远离水和潮湿的处所
请勿在雨中、脸盆附近或其他潮湿的处所使用方糖音箱。请小心不要将食物和液体泼洒在方糖音箱
上。
电池
方糖音箱的内置锂电池不可拆卸替换，并且需与普通生活垃圾分开处理及回收。
避免听力损伤
使用音箱装置时如果音量过大，可能会导致永久性听力受损。请将音量调整至适当的大小。如果您长
时间在高音量的状态下聆听，或许会因为习惯了高音量而认为这是正常的音量，但这还是会对您的
听力造成损害。如果您出现了耳鸣或听不清楚的现象，请立即停止使用并尽快就医。为保护您的听力
，建议将音量调整至适当的大小。
FCC 合规声明
此设备遵从 FCC 标准第 15 节。相关操作应符合以下两个条件：（1）此设备不能产生任何有害干扰，
同时（2）此设备必须能够接受可能干扰，包括可能会导致非正常工作的干扰。
注解：
此设备已通过检测达到 B 级数字设备的条件符合 FCC 标准第15节的规定。这些条款用于提供居住
安装内对有害电子干扰的合理保护。该设备产生、使用并放射电磁波能量，如果没有根据说明书安装
或者使用，可能会对无限通讯产生有害干扰。 然而，并不保证准确安装时不会产生干扰。如果设备对
电台或电视接收产生的有害干扰，可通过打开并关闭设备来确定。
注意事项： 用户可通过以下一个或多个方法来消除干扰。
－ 重新定向或定位接受天线。
－ 在设备和接收器之间增置隔离物。
－ 连接设备到另一个电路插座，该电路应与接收器连接的电路为非同一电路。
－ 咨询经销商或者富有经验的相关技术人员以寻求帮助。
重要：
用户不能自行维修无线设备。禁止以任何方式对设备进行改装。
对此设备进行任何未经授权的改装、或对连接电缆和设备进行替换和连接所引起的无线电和电视干扰，
我公司将不对其承担责任。这些后果将由用户承担责任。
只能使用此系统附带的屏蔽数据线。
对无线设备进行改装将会使此设备的使用授权失效。如需维修服务，请与 Sugr 联系。
© 2015 深圳米唐科技有限公司. 保留一切权利。
Sugr, 标志是 深圳米唐科技有限公司在中国及美国注册的商标。