SUMERAIN S3073CL User manual

MODEL: S3073CL
Version: 1.0
LED THERMAL SHOWER FAUCET SYSTEM

Dear Valued Customer,
SUMERAIN would like to take this opportunity to thank you for
purchasing SUMERAIN products. It is our sincere hope that you are
completely satisfied with your new purchase. We welcome any
questions or comments you may have and look forward to assisting you
in the future.
Sincerely,
SUMERAIN customer service department
1. Unpack your new product and ensure that all the parts are contained
in the packaging. Keep the product in its original box until you ready
to install it.
2. Shut off the water supply if replacing a previously-installed faucet.
3. Observe all plumbing and building codes in your area.
4. It is recommended that installation of the product be done by a
professional plumber.
Tools you may need when installing the faucet

Specification
Function Wall in, LED Thermal showerhead
Feature LED, Waterfall, Wall in
Style Contemporary
Number of Handles Single Handle
Faucet Total Height Adjustable
Showerhead Arm Spread 385mm [15 Inch]
Showerhead Width 208mm [8.0 Inch]
Showerhead Length 208mm [8.0 Inch]
Valve Type Ceramic Valve
Faucet Body Material Brass
Front panel Material Stainless steel
Sprayer Material ABS
Sprayer Length 220mm(8.7 Inch)
Net Weight 3.6 KG
Gross Weight 4.5 KG
Working water press 0.2 ~0.8 Mpa
LED power supply Water flow generator
LED Color changing
Water temperature < 28 ℃Blue color
Water temperature 28 ℃~ 38 ℃Green color
Water temperature > 38 ℃Red color

Dimension

Packing list

COD
E ITEM NAME QTY CO DE ITEM NAME QTY
A Showerhead 1 PCS B Showerhead arm 1 PCS
C Filter 1 PCS D Escutcheon 1 PCS
E Rubber gasket 1 PCS F Nut 1 PCS
G Front panel 1 PCS H Valve body 1 PCS
I Switch Knob 1 PCS J Screw 1 PCS
K Handle 1 PCS L Screw 1 PCS
M Hot/cold sign 1 PCS N Rubber gasket 2 PCS
O Water outlet port 1 PCS P Escutcheon 1 PCS
Q Rubber gasket 1 PCS R Nut 1 PCS
S 1.2m sprayer hose 1 PCS T Sprayer holder 1 PCS
V Plastic Expansion Nails 2 PCS U Screws 2 PCS
W Internal hexagonal wrench 1 PCS X Holder fixture 1 PCS
Z Internal hexagonal wrench 1 PCS Y Sprayer 1 PCS

Step 1:
Draw the dotted line of position where need to install shower system
and Dig hole “A” , hole “B” , hole “C” and hole “D” according to below
dimension

Image 1: Front view
Step 2:
Put the valve body with front panel into digged hole of wall exactly,
please fasten it to wall by screw if possible.
Image 2: Front view of digging hole
Image2: Through valve body with front panel into wall
Image3: fasten to wall with screw

Step 3:
Screw the switch knob and handle to faucet body by internal hexagonal
wrench “W” and “Z”, press the cold/hot sign into the handle hole as
below.
Image4:Valvebodyinstalled

Step 4:
Through the showerhead arm with escutcheon into digged hole of wall
and screw it with rubber gasket and nut.
Screw-in the showerhead to showerhead arm, please don’t forget to
put the filter into showerhead connecter at first.

Step 5:
Through the water outlet port with escutcheon into hole of wall and
screw it to wall by rubber gasket and nut.
Step 6:
Draw the dotted line of position where need to install sprayer holder
and Dig hole “A” and hole “B” according to below dimension

Beat the two plastic expansion nails into the hole “A” and hole “B” of
wall
Screw the holder fixture to plastic expansion nails in wall

Push the sprayer holder to holder fixture, please make sure elastic
pinch plate fasten to the bayonet closely

Step 7:
Connect the valve body with showerhead water inlet connecter and
Sprayer water inlet connector (Water outlet port “O”) by flexible hose
(Remark: the flexible hose need to order in local shop according to your
required length)

Step 8:
Please clear your hot and cold water supply system at first to avoid
blocking.
Connect the valve body to your hot water and cold water supply system

Step 9:
Connect the water outlet port “o” to sprayer “Y” with 1.2m sprayer
hose “S”
Step 10:
Open your hot and cold water supply system and inspect is there
anything leaking. Installation is finished if all the function working
normally.

Clean the faucets and showers as and when required. Regular■
cleaning can prevent calcification.
Never use cleaning materials contain hydrochloric, formic,■
phosphoric or acetic acid, which may cause considerable damage.
Never use cleaning materials or ap■pliances with an abrasive effect,
such as unsuitable cleaning powders, sponge pads, or micro fiber
cloths.
After cleaning, rinse thoroughly■the faucet with clean water to
remove any cleaner residue.
■Unscrew and clean the aerator regularly.
■Running the faucet once per week, the led generator will stop
working if long-term idle.
TROUBLESHOOTING
Symptom Solution
Faucet leaks from
the handle
A. Tighten the packing nut
B. Replace the "O" ring or packing
The water
pressure is too
low
A. Make sure the water supply valves under the sink are
turned on all the way
B. Clean or replace the aerator
C. Check plumbing system for water pressure problems
The spout sprays
water all over A. Clean or replace the aerator B. Replace the aerator washer
Water is leaking
from the faucet
under the sink
A. Check the water supply connections to the faucet
B. Inspect the water supply lines or hoses for leaks
Handle is loose
A. Remove the cap and tighten the screw
B. Locate and tighten the hex set screw
C. Remove the handle and check for stripped teeth on the
stem.
LED does not
illuminate A. Increase the water press B. Clean the strainer of hot and cold water inlet

HONGKONG SUMERAIN SANITARY INDUSTRY CO..LIMITED
Address: ROOM 1018, HOLLYWOOD PLAZA 610 NATHAN ROAD MONGKOK, KL
Factory Address: Shuikou Industrial Park, Kaiping City, Guangdong Province,
China (Mainland)
Toll Free: 400-0999-075
E-mail:[email protected]
SUMERAIN INTERNATIONAL GROUP – AMERICA Branch
Address: 13455 Harper Dr.
Saratoga, CA 95070
USA
Tel: [phone]
FAX: [phone]
E-mail:[email protected]