Sun Microsystems FI316 User manual

All the trademarks mentioned in this manual are registered property of Sun Telecom.
The right to interpret this manual is reserved by Sun Telecom.
English
User’s Manual
SUN-FI316
Fiber Optic Identifier
Table:SUN-UM-TE-FI001 Version:A/0

CONTENS
1 Overview....................................................................................................1
2 Technical Specifications ............................................................................1
3 Standard Accessories................................................................................2
4 Function Description..................................................................................3
4.1 Product Simple Figure....................................................................3
4.2 Features..........................................................................................3
4.3 Function Description.......................................................................4
5 Use instructions.........................................................................................5
5.1 Selecting Adapter ...........................................................................5
5.2 Clamp and loosen...........................................................................6
5.3 On/Off.............................................................................................6
5.4 Optical Fiber Identification..............................................................7
5.5 Battery Power Indication ................................................................7
6 Maintenance..............................................................................................7
7 Warranty and Service................................................................................7

F ib e r O p ti c So lu ti o ns P rov ide r 1/8
www.suntelecom.cn • [phone] • [e-mail]
1 Overview
SUN-FI316 Optical Fiber Identifier can quickly identify the direction of
transmitted fiber and display the relative core power without interrupting the
current service. The fiber identifier recognizes modulation like, 270Hz, 1kHz
and 2kHz with continuous audible tone.
There are four adapter heads available: Ø0.25, Ø0.9, Ø2.0 and Ø3.0. The
optical fiber identifier is powered by a 9V alkaline battery.
2 Technical Specifications
Type
Optical Fiber Identifier
Identified Wavelength Range
800-1700 nm
Identified Signal Type
CW, 270Hz±5%, 1kHz±5%, 2kHz±5%
Detector Type
Ø1mm InGaAs 2pcs
Adapter Type
Ø0.25 (Applicable for Bare Fiber)
Ø0.9 (Applicable for Ø0.9 Cable )
Ø2.0 (Applicable for Ø2.0 Cable )
Ø3.0 (Applicable for Ø3.0 Cable )
Signal Direction
Left & Right LED
Singe Direction Test Range
(dBm, CW/0.9mm bare fiber)
-46~10(1310nm)
-50~10(1550nm)
Signal Power Test Range
(dBm, CW/0.9mm bare fiber)
-50~+10
Signal Frequency Display (Hz)
270, 1k, 2k
Frequency Test Range
(dBm, Average Value)
Ø0.9, Ø2.0, Ø3.0
-30~0 (270Hz,1KHz)
-25~0 (2KHz)
Ø0.25
-25~0 (1KHz,2KHz)
-20~0 (2KHz)
Insertion Loss(dB, Typical Value)
0.8 (1310nm)

F ib e r O p ti c So lu ti o ns P rov ide r 2/8
www.suntelecom.cn • [phone] • [e-mail]
2.5 (1550nm)
Alkaline Battry(V)
9
Operating Temperature(℃)
-10－+60
Storage Temperature(℃)
-25－+70
Dimension (mm)
195X30X27
Weight (g)
230
3 Standard Accessories
Optical Fiber Identifier --------------------------------------------------------------------1
Adaptor Heads------------------------------------------------------------------------------4
Battery ---------------------------------------------------------------------------------------1
User Manual --------------------------------------------------------------------------------1
Portable Bag--------------------------------------------------------------------------------1
Sunshade------------------------------------------------------------------------------------1

F ib e r O p ti c So lu ti o ns P rov ide r 3/8
www.suntelecom.cn • [phone] • [e-mail]
4 Function Description
4.1 Product Simple Figure
4.2 Features
Portable, compact size and easy-to-use.
Efficiently identify the traffic direction and frequency tone (270Hz, 1KHz,
2KHz) without any damage of the fibers.
Core Power display of the tested fiber
Low bending loss and high efficient output

F ib e r O p ti c So lu ti o ns P rov ide r 4/8
www.suntelecom.cn • [phone] • [e-mail]
Easy to replace adaptors (Ø0.25, Ø0.9, Ø2.0, Ø3.0)
4.3 Function Description
1) Clamp
Clamp and hold the fiber in a suitable location.
2) Clamp Pushing Button
Push the button up and press downward to fix the adapter head.
Press the button again to loosen the adapter head.
3) LED indicator
The LED indicator to show the signal direction, modulation and battery
level

F ib e r O p ti c So lu ti o ns P rov ide r 5/8
www.suntelecom.cn • [phone] • [e-mail]
5 Use instructions
5.1 Selecting Adapter
1) Select the appropriate adaptor head according to the different types of
fiber
2) Insert the fiber to the adapter head when using the Ø2.0 and Ø3.0
connectors
3) Insert the fiber to the groove on the clamp when using the Ø900 and
Ø250 connectors

F ib e r O p ti c So lu ti o ns P rov ide r 6/8
www.suntelecom.cn • [phone] • [e-mail]
5.2 Clamp and loosen
1) Please insert the fiber into the adapter head and then push the “clamp
pushing button” up to clamp the fiber and test it
2) Please push forward slightly to loosen the adapter head
5.3 On/Off
1) Push up the “clamp pushing button”to turn on the unit
2) Loosen the “clamp pushing button”to turn off the unit

F ib e r O p ti c So lu ti o ns P rov ide r 7/8
www.suntelecom.cn • [phone] • [e-mail]
5.4 Optical Fiber Identification
1) Insert the fiber to the adapter head, push the button up to lock clamp and
cover sunshade.
2) When optical signal passes the fiber, the LED illuminator will indicate the
traffic’s direction with intermittently audible tone and the relative core
power will be also displayed in digital format.
3) If no optical signal passes the fiber, the LED illuminator is dead and the
“LO” will be displayed in the relative core power position.
4) Fiber identifier can also detect the presence of 2KHz, 1KHz and 270Hz
modulated tone with the continuously audible tone.
5.5 Battery Power Indication
1) When the LED indicator is green, the battery power is full.
2) When the LED indicator is yellow green, then the power is low but the
instrument can still work and test result is still reliable.
3) When the LED indicator is red, the power is too low and the instrument
cannot work properly and you have to replace the battery.
6 Maintenance
1) The fiber should be put in the groove according to the specific type.
2) Please use the cotton swabs to clean the detector surface regularly to
keep it from dust.
3) Please take out the battery when it is not in use for a period of time.
7 Warranty and Service
Caution: Repair it in the field is prohibited.
18 months warranty for Fiber Identifier.
Sun Telecom warranties that each of fiber identifier will be free from defects in
material and workmanship for 18 months. This warranty covers the original
user only and is not transferable. Should the device fail at any time during this

F ib e r O p ti c So lu ti o ns P rov ide r 8/8
www.suntelecom.cn • [phone] • [e-mail]
warrantyperiod, Sun Telecom will, at its sole discretion, replace, and repair or
refund the purchase price of the product.
This warranty is limited to defects in workmanship and materials and does not
cover damage from accident, acts of God, neglect, contamination, misuse or
abnormal conditions of operation or handling.
To establish original ownership and provide date of purchase, please
complete and return the registration card to Sun Telecom. This warranty card
will not go into effect until the warranty registration has been received by Sun
Telecom.
A warranty registration card is included with the original shipment of
equipment. Please take a few moments to fill out the card and mail or fax it to
Sun Telecom to ensure proper initiation of your warranty term.
Return defective product. Please contact Sun Telecom for a written
authorization. Failure to properly protect the product during shipping may
avoid this warranty.
Sun Telecom will pay return transportation for products repaired or replace in
warranty period. Before making a repair not covered the warranty, Sun
Telecom will estimate cost and obtain authorization, then invoice for repair
and return transportation. Sun Telecom reserves the right to charge for all
testing and shipping costs incurred, if test results determine that the device is
without defect
SHANGHAI SUN TELECOMMUNICATION CO., LTD.
Building No.145 Lane 666, Xianing Rd.
Jinshan Industrial Zone, Jinshan District
ShangHai, China 201506
TEL: [phone] FAX: [phone]
Email: [e-mail]
http://www.suntelecom.cn